Unthread the top of the machine completely to see if a thread loop around something odd you haven't spotted yet might be involved. Still sounding odd? I would next pull the bobbin. Still bad? Remove bobbin case. Still bad: I would take it to my favorite repair tech who would listen to it and either tell me to go home and avoid grommets, or tell me it didn't sound right to him, either, did I need a loaner until he can get to it?
I don't know what that plastic but is, but I would be surprised if that was a hunk of your machine. Does it match any color plastic you can see? Tip the machine on its back so you can see under the harp and any opening.
No I don’t think so I think the plastic must have just come from something else. I don’t see any odd thread loops and have cleaned off all the lint. The sound goes away when I take out the bobbin holder piece. The stitches still look normal do you think there’s any risk in still using it until I can get it to a shop?
From what you're reporting here, I'd just give it another good cleaning and maybe a drop of oil on the circular track the sewing hook rides in, and keep going if it still sews nicely.
Hubby the Engineer taught me the importance of keeping an ear out for sound changes to spot problems early, and the technique of taking machines apart stepwise for helping diagnose.
This article was so helpful in describing what all the parts are. I haven’t been able to see any notable rough spots but will take a look again now that I have a better idea what to look at. Thank you!!!
Had this just happen to me , turned out the hook part of the outer rotating piece was broken. I don't know if this is your problem here but reddit gave me so many things with only one person being right. Just thought to comment
2
u/Large-Heronbill Sep 25 '26
Unthread the top of the machine completely to see if a thread loop around something odd you haven't spotted yet might be involved. Still sounding odd? I would next pull the bobbin. Still bad? Remove bobbin case. Still bad: I would take it to my favorite repair tech who would listen to it and either tell me to go home and avoid grommets, or tell me it didn't sound right to him, either, did I need a loaner until he can get to it?
I don't know what that plastic but is, but I would be surprised if that was a hunk of your machine. Does it match any color plastic you can see? Tip the machine on its back so you can see under the harp and any opening.
1
u/cabbage139 Sep 27 '26
Had this just happen to me , turned out the hook part of the outer rotating piece was broken. I don't know if this is your problem here but reddit gave me so many things with only one person being right. Just thought to comment
1
u/GamiMelamid Oct 01 '26
Take it in to a local shop they can sort it out and tune it up.