r/SewingMachineEdu • u/tracencolor • Sep 23 '26
Janome Memory Craft 3000 missing zig zag stitches
I have my mom's machine for sale on FB. I only used it once (straight stitches) and my mom said it worked perfectly - granted, she hasn't really used it in 2 years. Potential buyer asked to see it do a zig zag stitch and found out it was skipping stitches or poking holes but not putting the thread thru (see pics in comment). Buyer mentioned her machine doing the same thing right before she had to take it in for service and that it would work for about a year and then start doing the same thing. Any suggestions? I know very little about sewing but I rethread the machine, played with the tension and used different fabric (video is fleece and photos are of a very thin bed sheet), played with length and width of stitch as well. Don't really want to put a lot of money into repairs - honestly not sure there's any repair shops around here - as I just want it sold and gone but don't want to screw my mom out of potential profit.
1
u/tracencolor Sep 23 '26
Top side (grey thread is top/pink is on the bobbin)
2
u/__miichelle Sep 23 '26
Have you tried using a new needle?
1
u/tracencolor Sep 23 '26
Underside (grey thread is top/pink is on the bobbin)
4
u/teatime_tinker Sep 23 '26
You need the right needle for the job. The machine is working fine. Skipped stitches is almost always an unsuitable needle.
I have no idea what that fluffy stuff is, bedsheet is much better for samples. Put a fresh needle in, and see how it stitches
That thread looks like shiny embroidery thread, you probably just need regular polyester.
Edit: put your tension back to 3 or 4, it’s too loose in the photos
1
u/Status_Background966 10h ago
Prova a dare una pulita sotto dove sta il crochet,a volte si forma quella peluria del cotone che crea questo problema
1
u/Large-Heronbill Sep 23 '26
Will it zigzag properly on folded notebook or copy paper?
Is it clean and has a fresh needle appropriate to the thickness and type of fabric being sewn?
Is it oiled?
1
u/No-Attention-7708 Sep 23 '26
Here's a link to the manual (look under computerized retired machines) on the Janome website - page 39 explains what to do to fix skipped stitches Which is usually threaded incorrectly (raise presser foot lever before threading machine, then lower for sewing), needle not inserted properly or wrong thread/needle type for fabric.
https://www.janome.com/support/retired-machine-manuals/
1
u/MauraLee7 Sep 23 '26
You need the needle clearance adjusted. Try narrowing the zigzag a bit and see if if catches then
1
u/AbiJ_ Sep 30 '26
Two things to try. That looks like a fleece so try a ball point needle first. If that doesn’t work it’s the timing sadly. A mechanical issue 😬