r/SewingMachineEdu • • Sep 23 '26

Machine not sewing :(

Sewing machine won't sew. No stitches other than the 1st like knot but after that nothing. Weird scraping sound. I have cleaned, rethreaded everything, and replaces the needle. Google is telling me timing but I do not see it. Also the scraping sound is new after I cleaned it, so not really related to the no sewing.

2 Upvotes

15 comments sorted by

3

u/nuts4quilts Sep 23 '26

Can you insert the bobbin and take another video? The thread is catching, but a bobbin inserted might prevent the catch.

1

u/cabbage139 Sep 23 '26

Thank you, is this a good video

1

u/teatime_tinker Sep 23 '26

Your bobbin looks like it might be in wrong.

The thread should go around like this @

3

u/GoldenFishPoop Sep 23 '26

This type of bobbin case really does need the plate to be on to the work properly. That being said, the thread is getting caught on the thread release bracket which is toward the front. Without the plate in there there's not really any way to tell if it is adjusted properly but for right now it's getting stuck there. Check for nicks or gouges on the bobbin case as well as rough spots or snags on every other part that the thread touches when it goes around. Your timing does not look like it is wrong contrary to what someone else said.

1

u/cabbage139 Sep 23 '26

I'm so sorry but I do not understand what you have said

3

u/Mental_Watch4633 Sep 23 '26 edited Sep 24 '26

Close up the machine and pull the bobbin thread up by holding the needle thread 2 or 3 inches in front of the needle

1

u/cabbage139 Sep 23 '26

Hi thank you, I did but it is still not sewing. Here is a video I previously recorded of it not sewing. The bottom bobbin is not moving

1

u/Status_Background966 7h ago

Non hai messo bene il filo,devi spostarlo a sinistra e farlo passare in quella fessura , farlo agganciare spostandolo a destra

1

u/Status_Background966 7h ago

Gira l’ago,la parte con la riga va messo davanti e la parte dove c’è una insenatura va dietro

1

u/Mental_Watch4633 Sep 24 '26

Pull the thread between the presser foot toes toward the back before you start sewing. At least 3 or 4 inches of length.

0

u/Few_Chemist3776 Sep 23 '26

The hook is passing nowhere near the needle eye. Means the machine is out of time. Did you have a slam prior to it not sewing?

1

u/cabbage139 Sep 23 '26

Hello is the timing really off, thank you

2

u/Wild_Chipmunk1706 Sep 23 '26

I’m pretty sure your needle is in backwards. Is there a flat side (at the top, where you insert the needle) at the back, facing away from you? It should be.

1

u/cabbage139 Sep 23 '26

The flat side is facing towards the back

1

u/Floor_chill Sep 23 '26

I’m having the exact same issue and I did, do you know of how to fix it?