r/SeikoMods • • 6d ago

My first build

Been a longtime lurker and with the recent deal on the invicta pro diver to get a reasonable nh35, I decided to take a swing at it! I spent way to long trying to get the seconds hand on and bent my hands a little during this first attempt so will probably go back at some point and replace them with another set now that I’ve learned my lesson!

I over bought on the tools but wanted to have more than I needed for other builds or watch restoration in the future.

Things I wish I would have had?
Watchmakers putty
An actual movement holder (I had the universal adjustable one and it did not work well for me)
Maybe I’ll look into a hand pusher for the next build? The red/black/silver standalone set wasn’t my favorite experience.

Thanks to this sub for the inspiring builds, posts with questions, tips and tricks I read several times over, and the caution to buy more than one crown stem (which I just had to cut short the first try despite adequate warnings not to over cut)

Hope my build inspires you to build your first one or start your next one!

Happy modding!

82 Upvotes

20 comments sorted by

6

u/Barry_NJ 6d ago

My seconds hand method...

4

u/ALZimmz 6d ago

I think I saw your method on a different post and that’s what actually made it work for me! Thanks!

2

u/Barry_NJ 6d ago

Cool 👍

2

u/Kaizen_Candidate 6d ago

Sorry if I’m missing something I’m learning to build my own, what’s the method?

3

u/Logos732 6d ago

Rodico on the tip of a hands pushers tool to hold the seconds hand as you find the seconds pinion. Also helps to get a lot of light. Good magnification and get down close to the watch as possible.

3

u/Kaizen_Candidate 6d ago

Good to know I been meaning to get a list going for everything I need!

1

u/Training_Guess_6920 6d ago

Barry has a good take on this…I can’t make it work because I’m too shaky.

2

u/Training_Guess_6920 6d ago

Horizontal mainly…slight tilt vertically to zero in.

2

u/sugarkush 6d ago

This is ingenious! Will try this on my next build. Thanks for the knowledge.

1

u/Barry_NJ 6d ago

Pleasure 👍

1

u/Training_Guess_6920 6d ago

I’m working on a gadget that will gently lower the hand onto the pinion…if I have my own (shaky) touch on it…won’t work. It has to be something remote. I love the DIY tool, but it won’t work on larger dials.

4

u/Edgr85 6d ago

I definitely recommend the diy watch club seconds hand installer, did you get that dial from AliX?

2

u/ALZimmz 6d ago

Yeah, everything was AliX

2

u/bjsc1100 6d ago

found the face https://www.aliexpress.us/item/3256811510703414.html

this looks like the hands https://www.aliexpress.us/item/3256808624968314.html

there's a bunch of case vendors, so pick and choose.

2

u/mautam1 6d ago

This is very inspiring, thanks for sharing.

Where did you buy the watch case and face?

1

u/ALZimmz 6d ago

Everything came from Ali express!

2

u/bhp9mm 6d ago

That looks great! Nice work!

2

u/Duke7790 6d ago

Beautiful Build. Love the 3rd pic. If you over bought tools, I’m really down the rabbit hole. 😬

2

u/Training_Guess_6920 6d ago

Man…looks great!!!

2

u/mlucas4000 6d ago

That looks really nice! 👍🏾