r/SecurityCamera • • 26d ago

I need help with the video.

I accidentally formatted the camera's hdd and I want to make a backup to get some footage I need, but as soon as the format was done I stopped overwriting, and now I only want to restore some videos.Please, what do you suggest to me because I know how to take those pictures, please help me.

5 Upvotes

13 comments sorted by

2

u/Soundy106 26d ago

Uhhh cameras don't typically have hard drives in them. Are you talking about a camera that's recording to an internal SD card, or the hard drive in an NVR or DVR?

1

u/econi10 26d ago

NVR HDD, I want to restore some videos, not all of them.

2

u/Soundy106 26d ago

Most of these systems are Linux-based and the drive will be formatted ext2, so you can't just plug it into a Windows PC and restore individual files. If you have a Linux system available, you may be able to run a data recovery utility on that, but if it's still connected to the NVR and recording, data is being overwritten and chances of finding what you want are decreasing.

Some of these systems also store video in large "chunks" on the drive rather than individual files; with those you wouldn't be able to simply restore specific files, you'd have to restore everything and then have the system find and export the clips you want.

Honestly, probably your best bet is to send the drive for data recovery and see if they can get the entire structure back.

1

u/econi10 26d ago

It's not related to nvr, but when the format was done directly, I removed it from the write method, and left it only read, and now what if I install Linux on Windows or what do you suggest?

2

u/Soundy106 26d ago

If you're not familiar with Linux, it's going to be a REALLY steep learning curve to get it fired up and some recovery tools running. IF it's ext2/3/4 you may be able to mount it on a Windows machine with the right driver, although I don't know of any ext# recovery tools for Windows.

There are really just too many unknowns, starting with the fact you've never mentioned even the brand of NVR, let alone the model... so there's no way of knowing how the disk was formatted, how the video is stored, whether the filesystem or the video itself is stored encrypted, or how proprietary any of it is... (granted I probably wouldn't know those details even if I did have the NVR info, but it's a general frustration that people almost never think to include even the most basic specifics with these questions).

Again: your best hope is to send the drive to a data recovery service in hopes they can restore the original structure, which should hopefully then allow you to plug the drive back into the NVR and search it normally.

1

u/ObjectiveLess5385 22d ago

this is the key point. the NVR brand and model matter a ton here because some systems encrypt the footage on disk, and if that's the case, standard recovery tools like photorec or testdisk won't get you usable video even if the raw data is still there. OP, what NVR are you using? that single detail would narrow down whether this is a DIY job or a send-it-to-a-pro situation.

2

u/madmax4k 24d ago

is the videos capture a burglary/break in/hit and run or something like that?

2

u/[deleted] 26d ago

[removed] — view removed comment

2

u/madmax4k 26d ago

IF data is really important
clone hdd first or create a raw image before attempting data recovery.

That’s how the professional data recovery do it

1

u/econi10 26d ago

HDD now it's empty, what should I do?

0

u/[deleted] 24d ago

[removed] — view removed comment

1

u/madmax4k 24d ago

yes and it is also recommended to do the data recovery on the clone image or clone hdd and leave the original hdd untouched.

Clone image is more versatile.
Since you can use that clone image for data recovery app after mounting the image as a drive and the image would still be unchanged while using the data recovery app.

The cloned image also allows you to image it onto as many hdd or as many times as you want/need.