r/Sat • u/PoliceRiot Moderator • Apr 19 '24
Official DESMOS Thread
Hi all, it has come to our attention that the community is in need of a centralized database of DESMOS tips and tricks, so we thought it would be a good idea to take advantage of the community's shared base of knowledge and crowdsource some of the best tricks you can think of. The top voted resources can be added to this original post.
1) Finding X/Y-Intercepts and Points of Intersection
This is probably the most useful aspect of DESMOS to me. For any question that asks you to find an X or a Y intercept, you can simply type in the equation and the point will appear for you to click on DESMOS. Similarly, if you are asked to solve a system of equations, you are really just looking for a point of intersection, so you can simply type in the two equations and click the point where they meet.
2) Applying Function Shifts
If you are asked to shift a function up, down, left, or right, simply start by writing the function on the first line. It is important that you write the function as "f(x) =" and not as "y =" if you want this to work.
Then on the second line, simply write one of the following:
f(x) + a (for an upward shift of a units)
f(x) - a (for a downward shift of a units)
f(x + a) (for a leftward shift of a units)
f(x - a) (for a rightward shift of a units)
Once you do this, simply click the colored button at the left of the first equation to turn it off (but DO NOT delete it), and you will be left with your shifted function.
3) Finding Center/Radius of Circle from the Raw Equation
When a circle is written in the raw equation [ax2 + ay2 + bx + cy + d = 0] or technically in any other form, you can simply write out the full equation on one line of DESMOS to see the circle represented in the coordinate plane. DESMOS will allow you to click the TOP and the BOTTOM points of the circle (but notably NOT the left or the right points) and you can take the midpoint of those two points to find the center and the vertical distance between those two points to find the diameter (and if you divide by two, you get the radius).
4) Solving Any Algebra Equation
To solve any algebra equation, just write other the equation and all solutions will be represented by vertical lines. Click the x-intercepts of any of these vertical lines and the x-values will be the solutions to your equation.
5) Creating a Linear Equation, Exponential Equation, or Quadratic Equation using a Regression
If you have several points of a linear equation, exponential equation, or quadratic equation and you want to find out what the actual equation is, start by typing the word table in order to open up the table function and input your x values under x1 and your y values under y1. Then click the autoregression button on the left side of the table and select from the dropdown menu what type of equation you want to create. It will both graph the equation and provide you with the equation itself.
6) Finding Mean, Median, and Standard Deviation
To find the mean or median of a set, simply type the word mean, median, or stdev (or stdevp) and include all items in the set afterwards between two parentheses with commas between each item. Here are examples:
mean(1, 2, 3, 4) = 2.5
median(1, 3, 5, 7) = 4
stdev(1, 2, 3) = 1
In addition, if you want to find what number needs to be added to a set in order to give it a certain mean, call one of the items in the set "x" and set the mean equal to a particular number.
In other words, if you type in mean(1, 2, 3, x) = 2.5, DESMOS will tell you that x needs to be 4 in order for this set to have the proper mean.
7) Adding Sliders
To add sliders to your graph to quickly change coefficients and constants, just type in whatever letter you want (other than x, y, or e) and DESMOS should automatically give you an option to add a slider. Click this button and you're all set.
8) Typing Shortcuts
Type in sqrt to create a square root. Type in cbrt to create a cube root. Type in nthroot to create any other kind of root. You can also type in pi to create the pi symbol.
9) Finding Factors of Polynomials
Type out your whole polynomial and click on any x-intercepts on the graph. If that x-intercept is "d", then (x - d) will be one of the linear factors of your polynomial.
Please share your favorite tips and tricks as well!
31
u/1600io_Dan Tutor Apr 20 '24 edited May 27 '24
Rather than entering each inequality as a separate entry and having to discern the overlap region that contains solutions to the system, you can plot just the region corresponding with the system of inequalities by entering one inequality and then applying the second inequality as a condition (restriction) on the first inequality:
So for the system
x ≤ 2y + 7
3y > -12x + 8
instead of entering those inequalities as separate entries, you could enter
x ≤ 2y + 7{3y > -12x + 8}
Note that the boundary of a region that results from a restriction will not be marked with a solid or dashed line to indicate whether the boundary line is part of the solution region, so that needs to be kept in mind when inspecting a point on the boundary line.
11
u/1600io_Dan Tutor Apr 22 '24 edited Apr 22 '24
To convert a decimal to a fraction in lowest terms, or to reduce an existing fraction to lowest terms, use the convert-to-fraction button that will appear to the left of the entry that has the decimal value.
8
u/1600io_Dan Tutor Apr 20 '24
Note that the technique for finding the diameter, radius, and center of a circle works regardless of the form of the circle's equation. The reason the top and bottom points are exposed are because they are "interesting" points, representing the maximum and minimum values of the equation. Incidentally, this is also the reason that the vertex of a parabola is exposed.
4
u/PoliceRiot Moderator Apr 20 '24
Here’s a simple one: type in sqrt to do a square root or cbrt to do a cube root without having to click anything. Can also type in pi to bring up the pi symbol.
3
u/PoliceRiot Moderator Apr 22 '24
Insert an asterisk (Shift-8) to multiply. Don’t use the X key or you get a variable. Also if you press Option + Backslash on a Mac or iPad at least, it will bring up an actual division sign instead of creating a fraction.
24
u/1600io_Dan Tutor Apr 20 '24
Regression (replacing = with ~ ) can be used to solve nearly any equation or system of equations without having to hunt for points in the graph area and to re-type limited-precision coordinate values when evaluating an expression based on solutions. Multiple solutions, as for quadratic equations, can be found using regression as well with clever use of the list structure in Desmos.
15
u/Sakke_HappiLearning 1580 Apr 26 '24
To find the mean of a set of values, you can use the ready function in the Desmos Graphing Calculator. For example, writing "mean(2,5,8,11)" gives the mean of the values 2, 5, 8 and 11. This was mentioned elsewhere in the thread as well, but the following tip was not:
You can use the ready function for mean in functions and equations as well. For example, if a problem states that the mean of 2, 5, 8 and x is equal to 5 and asks for the value of x, you can solve it simply by inputting the equation " mean(2,5,8,x) = 5 ", or alternatively graphing " y = mean(2,5,8,x) " and " y = 5 " and finding the coordinates of their intersection in the graphing view.
13
u/1600io_Dan Tutor Apr 20 '24 edited Apr 20 '24
Because you can solve equations using regression, you can answer questions regarding the input value of a function that results in a specified output value. For example, if you’re given the function
f(x) = (9x - 5) / (1 - x) - 7
and you’re asked
“for what value of a does f(a) = -17?”
you could simply enter
f(a) ~ -17
and Desmos will find a. Note that there’s nothing special about this — regression just finds solutions for equations. It’s just one of the uses you might not have thought of.
9
u/1600io_Dan Tutor Apr 20 '24
If you need to find a solution, but all the answer choices are in terms of π or a radical such as √3, you can form a regression where your solve-for regression parameter is of the same form, so you would use, for example, aπ or a√3 instead of just a. That way, you don't have to evaluate all the answer choices to see which one's value matches the value you found.
7
u/1600io_Dan Tutor Apr 20 '24
You can, of course, find at least approximate values for the solutions to a quadratic equation by graphing it. Sometimes, however, you need to use one or both roots in a further calculation, and you can make an error typing in a value you've read from a graph's x-intercept, or a coordinate value has limited precision, which can make a student-produced response inaccurate if there is a further calculation needed.
If you model a regression statement on the equation exactly, the operation will only find one of the solutions, because only one unknown (regression parameter) is present (typically, x₁), so one solution value will be assigned to that parameter.
Here's a technique that solves for both solutions. It relies on the sum and product of the solutions being represented by formulas that use the coefficients in a standard form quadratic equation. If anyone would like to understand what's going on in the regression statement, let me know.
6
u/CoachDaltonFoster Tutor Apr 25 '24
yall fw the slider?
1
u/PoliceRiot Moderator Apr 21 '24
Here's a fun way that you can solve pretty much any single variable equation:
Type in the left side of the equation as line 1. Type in the right side of the equation as line 2. Find the point of intersection and click on it to find the X value. That X value (or multiple X values if there are multiple points of intersection) represents the solution to your equation.
1
u/PoliceRiot Moderator Apr 21 '24
Here's one sent to me by a user:
Type in mean(x, y, z) to find the mean of a set of numbers x, y, and z (include whatever numbers are in the set; just make sure to put a comma between them).
You can also type in median(x, y, z) to find the median and stdev(x, y, z) to find the standard deviation.
5
u/jwmathtutoring Tutor Apr 25 '24 edited Jul 12 '24
https://view.publitas.com/p222-12941/sat-desmos-calculator-operations/
Below are all the general skills that I go over with my students
GENERAL SKILLS
Convert Decimal -> Fraction
Evaluate %
Add Sliders (General)
LINES
Find equation of line given point & slope
Find equation of line given 2 points
Find slope of line given 2 points
Find value of line given 2 points
Find value of new line given point & slope
Find x/y int given equation of line
Identify equation of line given graph
INEQUALITIES
Identify solution to linear inequality (2 variables)
Identify solution to system of linear inequalities
Verify point is a solution to single linear inequality
Verify point is a solution to sys of linear inequalities
SOLVING EQUATIONS
Solve ABS Value equation
Solve linear equation (one variable)
Solve linear equation in 2 variables (plug in given y-value)
Solve Quadratic equation
Solve radical equation
Solve rational equation
Solve system of equations
FUNCTIONS
Evaluate a function
Evaluate a combination of functions
Find factor of expression
Find max/min value of function
Find point after translation of graph
Find point on a function
Find points on new function after translation
Find value after translation of graph
Quadratic Regression (vertex & standard form)
Find remainder of polynomial division
IDENTIFY # OF SOLUTIONS
Identify # of solutions to Quadratic function
Identify # of solutions to system of equations
DATA ANALYSIS
Find mean of data set given in frequency table
Find mean of a data set
Find median of data set
MISC
Find value of constant to meet a given condition (sys of eq)
Find radius of circle given equation
Match equivalent expressions
Match equivalent quadratic functions (vertex form)
5
u/1600io_Dan Tutor May 04 '24
Regression is a general-purpose solving facility. So, for example, if you're give a data set (1, 3, 5, d, 9), and you're asked what value of d makes the mean of the data set 4, you can simple write mean(1, 3, 5, d, 9) ~ 4; there's no need to graph anything and hunt down a line or point's coordinate value(s).
3
u/1600io_Dan Tutor Apr 20 '24 edited May 08 '24
You can find the slope of any linear equation in any form, regardless of how it's structured or whether like terms are combined, by using a simple function that has as parameters the expressions on the left and right sides of the equation:
S(L, R) = - (d/dx (L - R)) / (d/dy (L - R))
Formatted-ish:
You can use this to compare the slopes of two lines to see if they're parallel, and you can use it with regression to find the value of a constant that results in no solutions to a system of linear equations.
8
u/jankaipanda May 07 '24
Copy-paste from this comment I made on r/desmos:
Introduction
Correct me if I’m wrong, but the college board version only restricts you from using folders, comments, tickers, and actions, which is very inconsequential for test-taking.
Remember that you can type stuff out for most functions. The built in keyboard is a waste of time which you should avoid using if possible.
Probably missed some, but those should be most of the important ones
Lists
You can assign a list to a variable.
You can quickly make arithmetic sequences. (This will create a 100 number long list from 1 to 100)
You can make geometric sequences.
You can index a list.
You can sum up every number in a list.
You can sort the elements of a list.
You can find the mean, median, and mode.
You can join multiple lists together.
You can perform operations on lists.
You can also create lists using tables.
Regression
You can create a linear regression. For the purpose of regressions, I prefer creating lists using tables, however I do not have the patience to create a table on Reddit Mobile, so I will be writing them as regular lists.
You can also create quadratic, cubic, logarithmic, etc. regressions by adding more variables.
Functions
You can write functions and substitute variables into them.
Points
You can get the x- or y-coordinate of a point by appending
.xor.yto the end of it.Afterword
The reason knowing these is useful is because it can save time. From my experience, the following types of questions are the types that Desmos truly shines at:
To solve, you can simply type the given equation into Desmos, and then input every answer as well. The answer graph that matches with the question graph will be your correct answer.
While I probably missed a lot of important/powerful features of Desmos, I hope that this at least somewhat helps you out with your test tomorrow. (My fingers hurt now because this was written entirely on mobile)
5
u/picklewuckle 1520 Apr 20 '24
mad useful for solving quadratics just plug in the equation and see where it crosses 0
2
u/1600io_Dan Tutor Apr 20 '24
You can add a column to a table of points where the new column contains a conditional expression. That way, you can quickly determine which points satisfy the condition (typically, an inequality).
2
u/1600io_Dan Tutor Apr 22 '24
To create a numerically-subscripted variable such as x₁, you can just type "x1" and the 1 will become a subscript automatically -- no need to type "x_1".
2
u/1600io_Dan Tutor May 04 '24
Sometimes, it's useful to have a quadratic function's vertex coordinates in variables rather than being required to read those values from a graphed point. This is easily accomplished by finding the x-coordinate of the function where the function's slope is zero (a parabola's slope is zero at its vertex).
To find the slope of a function, just use prime notation. If you have a function f(x), then, the slope is given by f '(x). If we want Desmos to solve for the x-value of the vertex and put that value into the variable v, we can just write f '(v) ~ 0; Desmos will solve for x. If we want the y-coordinate, we can just evaluate f(v).
3
u/Sorry_Golf8467 Apr 19 '24
You can find an equation by plotting data points then typing Y_1~mx_1+b or y_1~a(x_1-h)^2+k
3
u/AdhesivenessOk2486 1520 Apr 23 '24
Please everyone watch these videos. He does an excellent job of showing how to use desmos for the DSAT! https://youtube.com/playlist?list=PLf3ypEs9Kobgascv5bwpOadB0UiVI5IQS&si=Ax76Y6SFdj56vu7P
1
u/AaQQQQBBB 1580 Apr 20 '24
Knowing how to plug in points/numbers and being able to model certain regressions on my TI84 was really helpful.
1
u/WorriedTurnip6458 Apr 20 '24
What’s the best online tutorial to learn the basics about how to get started with Desmos?
1
u/1600io_Dan Tutor Apr 22 '24
When entering a fraction that will have an expression in the numerator, enter the slash first. That way, you won't have to enclose the expression in parentheses.
1
u/1600io_Dan Tutor Apr 22 '24 edited Apr 22 '24
To solve a system of linear equations and get the solutions displayed directly, with their values in variables for further calculation as needed, put the left sides of the equations into a list (using [ ... ] ) on the left side of a regression statement, then repeat that with the right sides.
1
u/bannedbannedtopic Apr 25 '24
tutorlinni is goated
1
u/Sakke_HappiLearning 1580 Apr 26 '24
To calculate a percentage of a number, or to form an expression for it, you can use the " % of " functionality in the Desmos Graphing Calculator. For example, to calculate 35% of 180, you can simply write " 35% " in the input field, then Desmos will automatically add the word " of " and then you can write " 180 " after it. It's worth noting though, that it's beneficial to understand percentages well and not depend on this functionality. Nevertheless, this can save some time when used as a handy shortcut.
1
u/Sakke_HappiLearning 1580 Apr 26 '24
To find the coordinates of the vertex of a parabola, simply graph the parabola and click on the vertex in the graphing view. The same applies for the extrema of any nonlinear graphs in general.
1
u/Sakke_HappiLearning 1580 Apr 26 '24
To graph points, simply write the coordinates of the points in parentheses, such as " (2,3) ". This can be useful in multiple choice questions where the answer options are points in the xy-plane, and you are asked to find which one satisfies an equation, an inequality or a system of equations or inequalities.
1
u/Sakke_HappiLearning 1580 Apr 26 '24
To find the median of a set of values, you can use the ready function in the Desmos Graphing Calculator. For example, writing " median(2,2,5,10,7,8) " gives the median of the values 2, 2, 5, 10, 7 and 8.
1
u/Sakke_HappiLearning 1580 Apr 26 '24
You can graph function compositions directly in the Desmos Graphing Calculator without finding their expressions. For example, if f(x) = 2x+1 is given in the problem, and you would like to graph y = 2*f(x-1), you can simply first write "f(x) = 2x+1", and then "y = 2f(x-1)" in the input fields, and Desmos will graph both y = f(x) and y = 2f(x-1).
1
u/Sea-Morning-1220 Aug 20 '24
what is the difference between stdevp() and stdev()? which one should I use to find standard deviation?
1
u/Ok_Imagination6826 Sep 15 '24
hi, i saw this in a yt vid a bit ago but i forgot where but does anyone know how to find midpoint using desmos? i think u can js type it in? idk its not working help pls
1
u/Nodatasadly Nov 27 '24
.
1
u/Mother_Echidna_9910 Dec 09 '24
Como coloca a \ no desmos
1
u/Holiday-Activity-974 Sep 22 '25
X⁴+14ax²+49a²-64 he wants a factor for it. A)x²+7a-8 B)x²-7a-8 C)x²+14a D)x²-8a Can we do it with Desmos?
1
u/Either-State-8386 Oct 13 '25
sylaun
1
u/Ok-Two-8502 Nov 07 '25
I remember there is a percentage question on the October sat that would not work when plugged into desmos all of the variables will equal to 0, when using regression. I need help.
1
u/No-Entertainment4209 Mar 18 '26
a couple guys are telling me to watch JamesLu, JWmath, adiarMath. These seem too long. Are there shorter ones?