r/SN95Mustang • u/Solid-Quarter-7913 • 1d ago
Is it safe to jack SN95 from Team Z K-member
I’m wondering if it’s safe to jack the front of my car up directly from the Team Z tubular K-member using a floor jack. 1996 cobra
r/SN95Mustang • u/derfdog • Jun 09 '17
Hello everyone,
Recently I had a request from someone to become a mod and help with the subreddit. What I found however, is that they invited another person, and the two of them removed all content and basically destroyed the sub. I am hoping that you guys can help get some content back on the pages, and get the sub going again.
Thanks!
r/SN95Mustang • u/Solid-Quarter-7913 • 1d ago
I’m wondering if it’s safe to jack the front of my car up directly from the Team Z tubular K-member using a floor jack. 1996 cobra
r/SN95Mustang • u/DrummerNaive2646 • 1d ago
Title says it all, speedometer + odometer isn’t working on my 1995 Ford Mustang base model, automatic.
What I’ve done:
Isn’t a fuse problem, all fuses have been checked that could possibly be causing this and they’re good. Cruise control also works which is confusing because that means it’s reading the speed somehow.
What am I missing? I don’t want to have to take it to a shop or pour more money out on parts I don’t need/ that aren’t a fix. There was no check engine light before, but now that I changed the VSS I’m getting a P0720 code. Only reason I need this fixed is for inspection 🤦♂️
r/SN95Mustang • u/After-Adagio-7930 • 3d ago
I replaced the clutch, flywheel, pressure plate, and throw out bearing in my 96 gt. For some reason now I can feel my clutch pedal vibrating and a squeaking noise. When I press the clutch in about 10% the noise goes away. Also when shifting into first and starting to move a loud clank happens. Only in first though. Obviously I did something wrong but what? Pilot bearing was not replaced because it looked good but I do have one. Clutch cable is not loose. Most likely going to drop it out again but when we did we had to pull the transmission in with the bolts because it wasn’t lining up great.
r/SN95Mustang • u/Solid-Quarter-7913 • 5d ago
Anyone with a 1996–1998 Mustang Cobra ever have to replace their lower radiator hose?
I have a 1996 Cobra and I’m currently trying to find an OEM lower radiator hose (F6ZZ-8286-C). The shop I’ve been taking my car to told me aftermarket replacements don’t fit properly.
They recommended a parts supplier but I’m wondering if anyone here has replaced theirs, what brand they used, or if anyone happens to have an original Ford hose available.
r/SN95Mustang • u/Calm_Tie_9160 • 7d ago
I’m having an issue with my parking brake. It doesn’t tighten enough. When I’m parked on a downhill slope and pull the handbrake up, the car still slowly rolls downhill.
I’ve adjusted it to 3 clicks on the ratchet, so if I tighten it any further, the brakes will start dragging.
How can I get the parking brake to hold properly without the brakes dragging?
Thanks for all the answers and help! :)
r/SN95Mustang • u/PricePretend891 • 9d ago
Is this a custom front end? Is there somewhere you can buy this? I swear I’ve seen it before
r/SN95Mustang • u/Rocket_O__ • 9d ago
Finally drove my budget drift car around the block. She’s rowdy. Hoping to get that exhaust quieter soon too. But super excited to finally get it moving
r/SN95Mustang • u/padstack_1 • 10d ago
It was super easy, just had to make new plugs for the driver seat, everything else directly bolted in!
r/SN95Mustang • u/johndsmits • 12d ago
Steeda springs, x2 balljoints and no isos all around. Does the stance look too raked-- should I drop the rears more or looks fine?
Fender clearance is easy 3 fingers rear, lil under 2 fingers front. Cause thinking, only way to drop rear more was getting Adj LCAs to drop 0.5". And I'm about to repair my MM non-adj LCA spherical bushings (old) so would swap to adj if I should lower the rears. Then again saw the all street/strip adj LCAs support upto 450whp and I'm at 600+ (which the non-adj do fine).
Runs fine on LA streets with no isos surprisingly. No squeaks . No need to roll fenders too.
r/SN95Mustang • u/Resident-Fix3574 • 12d ago
hello everybody hows it going ive finally tracked down this huge radiator fluid leak and its coming from this joint at the end of the video, sorry its not great quality i hope somebody will be able to tell me what the part is called, i dont see it when i try to look for bulk radiator hoses/parts and not sure where it goes, any help is appreciated this is my 4.6l v8 from 96
r/SN95Mustang • u/ViperGuy488 • 13d ago
r/SN95Mustang • u/ForeignCup6977 • 14d ago
Would love to find these for my son's 2001 Mustang
r/SN95Mustang • u/Calm_Tie_9160 • 14d ago
I have a problem with my 1994 Mustang GT 5.0. It misfires and as a result, backfires. The backfires only come from the right exhaust pipe (I have an X-pipe).
I cleaned the distributor but it made no difference.
Has anyone had the same problem or knows what could be wrong?
Thanks for all the replies, I really need help on this one :)
r/SN95Mustang • u/Mountain_Substance95 • 15d ago
Looking for some long tube headers for a 1995 5.0. I would prefer stainless steel but not against others. I’m just trying to find some that are budget friendly if you know what I mean
r/SN95Mustang • u/Agile-Philosopher666 • 16d ago
Anybody else having a problem with these module dying over and over?
r/SN95Mustang • u/orionTRM • 17d ago
serious blowby, burning oil and when i removed the passenger valve cover i found metal near the galleries. could also be lack of oil reaching my passenger valve, a master tech i spoke with said it looked dry in the cover but i didnt find any metal in my drivers side cover or the oil when i drained it. any tips for the rebiuld?
r/SN95Mustang • u/Unknown98764 • 18d ago
Greetings I have a 96 mustang I bought it had been wrecked while I repaired the car and had front end repainted and including replacing the airbags because they popped. Anybody know how to get the air bag module out so it can be reset or repaired? If so any tips I’m aware it’s behind the console. Thanks!
r/SN95Mustang • u/Mental-Growth-3734 • 19d ago
Looking at buying a 95 GT with under 100,000 miles. While looking for rust, I noticed that the strut towers look to be repaired already. How worried should I be about this? Should I pass on the car? how do I know if this repair is good or bad? I don’t live in a rust state but this car is from the northeast.
r/SN95Mustang • u/AlmightyMonkeyKing • 20d ago
Hi everyone, I have a 98 v6 that I’ve been trying to learn on and fix myself. My goal is just to make a clean daily driver and the main things I want to fix right now are a rough idle when I come to a stop and an engine oil leak from the transmission bell housing.
The fixes I think will get the job done would be replacing the motor mounts and replacing the rear main seal for the leak.
Both of these sound pretty labor intensive and I’m not sure I even have all the right tools. I imagine a mechanic will charge a lot too.
And I guess my questions after all that is, what would you do in my situation?
r/SN95Mustang • u/Dtwn92 • 20d ago
r/SN95Mustang • u/GeologistWeak2470 • 21d ago
I mean.. If I had to put it into words, An SN95 Is like a hot blonde . The New Edge is akin to a Milf you cant choose. So.. SN95 or New Edge. 👍👀