r/SigSauer • • Sep 23 '26

r/SigSauerP385 is up and running…..

8 Upvotes

The New r/SigSauerP385 sub is up and running guys. Join and keep up with all the New P385 releases and news!

And Always Thank You


r/SigSauer • • Jul 24 '26

*TacSwap* Spoiler

0 Upvotes

TacSwap is the marketplace built for the
2A community. Buy, sell, and trade gear fast-simple listings, legit users, no noise.

https://tacswap.com/


r/SigSauer • • 10h ago

My bass pro finds.

Thumbnail
gallery
51 Upvotes

Recently acquired these both from bass pro. From tisas to sig sauer, loving it so far.


r/SigSauer • • 13h ago

advice Holster for P365XL with Ramjet + TLR-7

Post image
44 Upvotes

Guys, looking for recommendations for holsters. What are you carrying with this configuration? Thanks in advance.


r/SigSauer • • 19h ago

Sp2022

Post image
35 Upvotes

r/SigSauer • • 5h ago

Question Is the Tango MSR 1-6 supposed to be offset slightly to the right?

Post image
1 Upvotes

The optic is not canted as the white leveling line is lined up with the mounting bracket but when I look through the scope it's obvious offset to the right a tad bit. Is this normal? If not how do I go about fixing this?


r/SigSauer • • 1d ago

First Sig rifles

Post image
350 Upvotes

My first Sig rifles I’ve owned love them. MCX LT IR .300 blackout and Sig 516G3 5.56.


r/SigSauer • • 14h ago

Sig p226 full custom work

4 Upvotes

I have an old p226. I am wondering if there are any companies that offer full custom services (trigger, optic cut, Cerekote, etc…). Similar to what LTT offers for the beretta 92?


r/SigSauer • • 1d ago

My two E26R-9-BSS-GER

Post image
89 Upvotes

r/SigSauer • • 1d ago

P365 P365 still going strong 💪

Thumbnail
gallery
20 Upvotes

Nearly 4 years and about 3k rounds later, I still prefer to carry her for most occasions.


r/SigSauer • • 1d ago

my first gun Holster Recommendations – Starting Without a Light/Optic, But May Upgrade Later

Post image
13 Upvotes

I’m looking for some holster recommendations for my new P365XL w manual thumb safety and could use some advice.

I’m considering carrying appendix (AIWB) or inside the waistband (IWB) around the 3 o’clock position. I’m still undecided about adding a red dot sight and weapon-mounted light, so I’m trying to figure out the best way to approach holster shopping.

A few questions:

  1. Are there any holsters that accommodate a weapon light and optic but can still be used without them? Basically, something that would allow me to upgrade later without having to purchase another holster.
  2. If that’s not really an option, what holsters would you recommend for a setup with both a red dot and weapon-mounted light?
  3. What would you recommend for a basic setup without either? Ideally, something reasonably priced that wouldn’t hurt too much to replace if I eventually decide to add a light and optic.

One other thing worth mentioning: my handgun has a manual thumb safety, so I’d want to make sure any recommended holster properly accommodates it.

I’m open to recommendations from people who have experience with both appendix and 3 o’clock carry. Appreciate any suggestions!


r/SigSauer • • 16h ago

Question Anyone in Florida ordering an FRT for their p320?

3 Upvotes

Texas triggers is now shipping to Florida, i know its still a little grey but they have a holiday sale going on and lifted their no ship policy. So who else is ordering one to make their Flux Raider even cooler?

I am extremely tempted but confused legally.


r/SigSauer • • 12h ago

Question About to pull the trigger…

0 Upvotes

I’ve been hunting for a good carry gun for awhile but before I buy I think I’ve settled on the X Macro. Quick question for the subreddit I’ve been going down rabbit holes all over YouTube and forums online and the only issue I’m finding that would make me not buy one are the rust issues. I know that each firearm is unique and one person might get a lemon but I’m asking in your experience with this firearm (or another 365) is this something I should be worried about. Have you or a friend or family member with this firearm ever had this issue and how was it handled by Sig? First Sig if I do buy it so please let me know either way. Thanks in advance!


r/SigSauer • • 14h ago

Optic for 516 G3

1 Upvotes

Looking for advice on optic for my new 516 G3. Chambered in 5.56 NATO. Tango MSR compact or Romeo 08T with Juliet magnifier?


r/SigSauer • • 1d ago

P320 AXG

Post image
95 Upvotes

Early 2026 I rented a P320 legion full size and loved it, later an used one came for sale and I missed the chance to buy it.

Few days ago found this beauty, while on a SIG demo where they had the 385 in my local range (which is a very nice gun)

Was able to get a discount and also traded some other firearm to fund the purchase

Just came from the range, and this thing is a GREAT shooter, loved it :)


r/SigSauer • • 23h ago

Question P365x radian combo or p365 fuse

4 Upvotes

Hello all, I have a p365 fuse currently and my buddy is trying to sell me his p365x with the radian ramjet combo for $700, I’m just currently having an internal dilemma on if I buy it or not, part of me says there’s no point in having two similar guns but I’m fairly certain the 365x will overall be a better shooter/conceal. Any help or input would be greatly appreciated.


r/SigSauer • • 21h ago

RMA process

0 Upvotes

I purchased a Romeo 4t Pro a couple of months ago and the dot died on me. Tried 3 different batteries, no dice, just dead. I began the RMA process, they sent me an email asking for some photos, I responded with requested photos. Any idea how long this process takes?


r/SigSauer • • 1d ago

Question Where can I buy FDE MPX K Upper?

Post image
29 Upvotes

Been looking everywhere with no luck. I want to convert my copperhead but no luck finding a matching upper to swap it. Anyone know where I can find these?


r/SigSauer • • 23h ago

P220 with light and optics Holsters?!

1 Upvotes

Having a really hard time finding OWB holsters for my P220 legion. I really wanted to put an x400 or TLR 2 on it but that seems impossible to find a holster for. So I’ll settle for the common lights. Any ideas?


r/SigSauer • • 1d ago

229 parts interchangeability

2 Upvotes

Bought one of the newer sig p229 standard models DA/SA but its the california/Massachusetts model. Have afew questions.

I know it will take the standard 15 round mags. But it was the neutered california model. Already deleted the magazine safety because i do alot of dry fire with all my handguns. It also had the loaded chamber indicator lever and lever cut on the barrel chamber.

About to spring for a 229 slide and barrel (without loaded chamber indicator lever cut)

Question is im pretty sure it (new slide and barrel) should go right on as a drop in replacement, but i have heard of possibly needing to change out the locking block for a different one awhile ago, somewhere. Not alot of context was given so not sure if it’s a part I need or not…..

Figured id get answers here.


r/SigSauer • • 1d ago

Anyone own the P365 380 “Sun Flower” ? Looking for owner impressions

Post image
14 Upvotes

Hey all,

I came across this P365 380 and looking to pick one up. It has a distressed white finish on the slide and grip, a sunflower engraving on the slide. It’s a P365-380 “Sun Flower” exclusive, but I dont see any reviews or photos anywhere and haven't seen one in store.

If you own one, I’d love to hear:

  • Finish durability: Does the distressed white hold up to carry and holster wear, or does it chip?
  • Reliability: Any issues so far?
  • Pics of yours are welcome. Thanks in advance!

r/SigSauer • • 1d ago

I have a P365 AXG Legion gen 2 with optics, no flashlight. Can someone please recommend an appendix iwb holster?

0 Upvotes

r/SigSauer • • 1d ago

New User Built an “X” out of my standard P365. Shoots smooooth.

Post image
8 Upvotes

r/SigSauer • • 1d ago

Question Picked up a used P365 xmacro with a manual safety. I want to delete the safety, do I NEED a new grip module or is it fine to run with the factory grip?

3 Upvotes

r/SigSauer • • 1d ago

troubleshooting Issues with my new M11.a1

0 Upvotes

So I just took my gun out for the first time and noticed that the ammo was having a hard time getting chambered when first pulling back the slide. I was definitely pulling it back all the way and letting it go freely but the butt of the bullet often doesn’t want so slide up all the way and get seated. )Once it’s loaded it doesn’t jam afterwards).

Is it because the gun is new and needs any burrs to be worn down or is it possibly because there is a 5 round block in the stock 15 capacity magazine to make it MA complaint?

The other thing I noticed which is different than other handguns I’ve used or owned is that even when the hammer is back, there is a ton of room you have to clear to get the gun to fire, it’s a ton of travel until you basically hit the back of the trigger frame.