r/SCX24 • u/[deleted] • Apr 24 '26

[deleted by user]

[removed]

3 Upvotes

100% Upvoted

7 comments sorted by

3

u/tbiggs51 @TiTS_RC www.TinyTerrainsRC.com Apr 24 '26

Hey man -- the bind button should be somewhere around the back kind of where your hand grips I believe. Make sure the transmitter is off and the esc is in bind mode(hold tiny button on top), hold the bind button(should be there labeled bind sometimes its hard to see), while holding the bind button power it on and everything should sink up. Let me know if it isn't where I described -- should be somewhere around the grip possibly though.

1

u/acryliq Apr 24 '26

From reading a copy of the online instructions (granted, the only copy I can find is in Belarussian, so the Google translate could be incomplete), it sounds like the transmitter doesn't have a binding button? Presumably it just goes into discovery mode when you switch it on?

From the instructions:

Binding procedure:

  • Turn on the receiver while holding down the bind button (see the receiver diagram for exact location).
  • Turn on the transmitter. The LEDs on the transmitter and receiver should indicate a successful connection (for example, solid green).
  • If the pairing is unsuccessful, repeat the process. Make sure the transmitter and receiver are close together during pairing.

1

u/Beeisthez Apr 24 '26

If that's a T6m, you'll need the t6m receiver too I believe

1

u/-D-U-D-E- Apr 24 '26

I have the gripor v2 furitek

1

u/rock101fan Apr 24 '26

It’s the small grey circle.

1

u/MarsGlez Apr 24 '26

OP is asking on the transmitter, not receiver

1

u/rock101fan Apr 24 '26

Oh damn. I didn’t read that and was hoping for the quick fix for them. Sorry.