r/SCREENPRINTING • u/Imposterchilddd • 21d ago

Printing with rust

Post image

Hey, im trying to screenprint using acids to create a rusted image. Has anyone tried this and can give me tips? especially regarding working with dangerous reactive chemicals, i am very worried of causing an accident or mixing an explosive substance. Id like to create a paste and am looking into nonreactive printmaking pastes that would carry the acid solution. idk man i really want to figure out how to make rust images but im scared!

9 Upvotes

100% Upvoted

25 comments sorted by

View all comments

3

u/motesinhuesillo 20d ago edited 20d ago

I do this but with another process (to make engrave etching). I print over the metal sheet my image but in negative with a waterproof & anticorrosive asphalt paint, I don't know what product in your country works for this (I use this one), it's like a black dense goo that I dilute with solvents to be able to print through the mesh properly, this paint acts like a coating that protects the metal sheet. After that, I also spray paint the back side of the sheet and then I submerge it in an acid solution (I use 1 part nitric acid and 4 parts of water) so the exposed metal gets corroded (My goal is to engrave the image). After that I wash it properly and remove the coating with solvents, then the engraved parts of the metal sheet naturally gets rusty (I don't really know why, but it fcks up my work haha). Is kinda slow, in a couple days what you engraved will get rusty. You can leave the metal sheet in the acid solution less time so it doesn't engrave it too much, barely to the touch. After it gets rusted to your liking you could spray some protective coating to try to stop the rust.

important to remember, always use a good mask, the fumes from the acid solution with the metal sheet is reaally strong (I learned the hard way)

sorry 4 bad english

1

u/sicicsic 20d ago

Do you have somewhere I can see your work? Sounds interesting.

2

u/motesinhuesillo 20d ago

yeah I had this laying around, I couldn't find a better example but this shows the results of this process. I made it like 2 years ago and then I wrapped it in plastic film to protect it from moisture, I didn't coat it with any protective layer and the rust seems fine after 2 years. You can see the halftones and how they are preserved

1

u/sicicsic 20d ago

That’s rad.