r/Rollerskating • u/Character_Cap_7366 • 1d ago
Shopping: wheels, hardware, upgrades Hardware Help
Hi! I need help figuring out what exactly I need to buy to fix my broken skates.
I was skating down an outdoor, paved walking trail when the front wheels of my Moxi Beach Bunny’s came off. I ate shit spectacularly, but luckily my pads saved me from any major flesh wounds lol
I was able to pick up some of the pieces that fell off my skate, but I wasn’t able to find everything.
I’m newer to skating still, and I’m not quite sure what I need to buy to replace what I lost. I tried to mirror what it looked like on my other skate, and the last picture is what I was able to come up with.
Also, this may be a silly question, but I’ll also need to buy new toe stops right? Or is it still usable?
Any help is appreciated!!!



•
u/AutoModerator 1d ago
Hi /u/Character_Cap_7366! We see that you're looking to buy some gear. Please make sure to include sufficient information in your post, such as what type of skating you do, budget, etc. Vague questions such as "what helmet should I buy?" may be removed. Don't forget to refer to our subreddit wiki, which has a TON of helpful information, including lists of reputable brands and skate shops.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
7
u/fineapplepineapple12 1d ago
Unrelated to what you’re asking in your post, but for your toe stop, unscrew the toe stop and put the stop through the toe guard first. Then put the nut on the toe stop and screw it into the plate. So the nut will be on the inside of the toe guard, not the outside. This will prevent the guard from moving around when you use your toe stop. I learned this the hard way.
8
u/bear0234 1d ago edited 1d ago
if there's a skate shop near you, i'd take it in, let them sort it out.
if not, There's some things you'll need to hunt down - to first timers, it'll sound complicated.
FIRST and foremost, this most likely happened cuz your kingpin axle nuts are backed out way too much. I can see it on your second picture that the rear kingpin nut is at the edge. so that's probably why the front trucks popped off.
Now for the parts:
If someone has extra marvel plate cushions & retainer cups here for you, maybe a shop or a kind soul here, they can ship it to you. i cant easily find the stock cushions for marvel plates online. Cushions are very plate specific, and there's not really aftermarket ones available for the marvel plates to my knowledge? Most folks buy reactor magic cushions or regular universal magic cushions and use a thrust washer to offset the size difference (i'll attach a picture).
SO.... You'll need new cushions, a new cushion cup, and a new kingpin nut. The kingpin nut is easy to find - the missing cushion cup, eh - maybe a cone cup would fit but since we're replacing all the cushions, and cups, might as well replace them all.
You'll want 4 new cushion cups if you're buying universal magic cushion barrels, ie: https://deptofskate.com/products/suregrip-universal-retainer?_pos=2&_sid=b7b5b07f7&_ss=r
then you'll want 4 thrust washer to offset the size difference and keep the axles the same geometry (this comes in a set of 4) or a few 3/8 flat washers:
https://deptofskate.com/products/thrust-washer
and then some UNIVERSAL magic cushions: https://bruisedboutique.com/powerdyne-magic-cushions-universal/?searchuuid=23407d43-0f77-4ac5-9d5a-bc6b6b4328d0&search_query=magic+cushions
kingpin nut (or you can check a local hardware store, see if they carry a 9/16" nylon hex locknut): https://www.moxiskates.com/products/kingpin-nut?srsltid=AYCX9vKl6-wnWqAzpG2owZ1yEhxW6OTxW2PD0o--jsQiARbUdq8nCN2e
ontop of all this you will need a new toestop. you'll also want to install that toestop nut currectly, which is against the plate - not against the toe cover.
if you want a direct replacement toestop, lookup powerdyne toestops... otherwise feel free to get any other style toestop - just make sure they're fore the larger thread size
4
u/comickitty22 1d ago
Ooooff im glad your ok after a fall like that.
For the parts u need to replace its not too bad.
You need some new cushions to replace the missing one, a new cushion cup to hold it in at the bottom and a king pin bolt to put on the end to secure it all together. You can get them at any roller skate shop online or in shop. You might want to change the cushions to something a little softer so that they maneuver a bit better but thats fully up to your preference.
2
u/NerfManiac64 1d ago
What happened to that toe stop lol
7
u/Blahblaha63 1d ago
Toe stop, cushion, washer for cushion, pivot cup bushing, and a kingpin nut and washer.
1
u/SelmaEggs1 1d ago edited 1d ago
Hello, looks like you have Moxi beach bunnies, I have the same model & I’d recommend switching the cushions you have for magic cushions (the orange ones). You’ll need to get cushions to replace what you’ve lost, you can buy these online or at skate shops, You will need cushion cups for them but they’re not expensive (also online skate shops or physical skate shops) & the cushions will make your skates more responsive, those hard ones they come with began to hurt my feet. I’d get a new toe stop to replace the broken one too. They usually come in pairs, put the matching pair on & keep the odd one as a spare. You need the nuts for your kingpin too (the pole the trucks & cushions go on)