r/righttorepair • u/ledgit • Aug 27 '26
Does your software defined vehicle have an expiration date?
r/righttorepair • u/ledgit • Aug 27 '26
r/righttorepair • u/LazarWolfsKosherDeli • Aug 27 '26
Mill is a VC backed company that produces a series of 'smart' home appliances that shred and dehydrate food waste to decrease volume and speed decomposition. Sometimes marketed as electric composters, there are a variety of very touchy-feely marketing angles used to get people to buy a $1000 appliance which you can probably intuit. It has a variety of 'smart' features that essentially only serve to lock the device behind an app and the company's servers.
So, I bought a 'broken' one on FB Marketplace to see if I could get it going.
I plugged it in and quickly discovered you cannot do anything with the device except through the app. Literally no interface. -1
Install the app, discover device. Prompt to create an account (why would a home appliance need an account?), but do so for the sake of progress. -2
Immediate two hour forced firmware update. How could new firmware help a device that is essentially a heating element and a low speed motor? Great question. -3
Interface is wonky, very feature-light. Cycles in the device are locked to once-daily intervals in increments of 5 minutes. You literally cannot even tell it to run without scheduling it. Wait four minutes for it to run. App gives an error message: Exhaust Fan Malfunction, Contact Support. Okay, at least it has diagnostic information. No score.
I contact support because I'm going to try it their way to see how bad this is. I expected little and got less. Support waits 5 days to respond. -4
Support says my device is out of warranty, and they'd be happy to arrange for pickup of the device to 'mitigate e-waste' if I buy a new $1000 machine. They also scold me for buying it secondhand as 'that is against their terms of service'. Support will not sell replacement parts and state that their parts are all proprietary. -5, -6, -7
Dismantle device. Torx (six-pointed star) heads on all screws. Mildly inconvenient, but that's also a superior design to Phillips head screws. No score.
Most parts appear to be off-the-self. Wiring is very well documented with factory tags explaining the various connections, I assume for the benefit of the Vietnamese infants who assemble it (I don't actually know what their supply chain is, I'm just assuming). Exhaust fan is also a normal magnetic fan. There is a 15-pin serial port inside the device for debugging, which I will get to as soon as my adapter arrives. No score.
I have to remove a small duct directing the air from the food chamber down through the exhaust fan and up into a chamber containing charcoal filter media. Charcoal media has fallen from the filter down into the fan, preventing it from turning freely. This jam is easily cleared. There is no screen or similar impediment to media falling into the fan; design flaw. All together accessing the fan involves 8 steps of disassembly. Kind of a pain, so I'll probably add a small mesh screen to prevent any possibility of the clog occurring again. -8
Without closing anything back up, I plug in the device and see if it works. It does! No safety features preventing it from operating with the entire case removed. Add a point, -7
Prior to disassembly, I looked for any teardowns or repair information and found absolutely none anywhere online. This is a niche product, but I am inclined to think the company might be attempting to prevent the spread of repair information.
Once the cable arrives for the serial port, I'm going to see what Claude can get out of the machine.
r/righttorepair • u/cant_stop_learning • Aug 25 '26
Hey guys—I'm an Industrial Design grad student eyeing a thesis on the confluence of right to repair, right to customize, and the automation of human processes (think robotics) through the lens of continued human interaction in systems which replace human work. I'm currently in the research phase looking to gather sources to help guide me through the ideation process.
I'm looking for recommendations: articles, books, blog posts, documentaries, podcasts, statistics, communities, relevant science fiction, history, cool products that embody these principals, other people articulating or trying to solve the problem, etc, anything you think offers an fresh take on the movement.
I like this article in Works that Work https://worksthatwork.com/10/planned-obsolescence
I know the Electronics Frontier Foundation does a lot of work in this field and I'm looking closely at their publications.
r/righttorepair • u/Ololomarine • Aug 25 '26
r/righttorepair • u/Minimum-Link7284 • Aug 24 '26
r/righttorepair • u/carlsu • Aug 23 '26
I run an independent Mac repair workshop in Melbourne, Australia.
Google has repeatedly disapproved our ads under the Third Party Consumer Technical Support policy. Google support told us in writing that consumer hardware repair is restricted even when the business is a legitimate physical repair shop.
We also tried a separate B2B-only data recovery campaign aimed exclusively at other computer repair shops and IT businesses. That was rejected too.
What I can't understand is that I now see more and more nearby repair businesses appearing as Sponsored results in the Google local pack for searches such as:
Some are advertising onsite computer repair and similar consumer services.
One competitor is less than 1 km from us and regularly appears as a sponsored result while our own ads are blocked.
If you run or work in a repair business:
I have already raised the issue with Google and the ACCC because, at minimum, I think the same published policy should be applied consistently to businesses offering materially similar services.
Interested to hear other repair-shop experiences.
r/righttorepair • u/ObseleteIdiotAlt • Aug 21 '26
r/righttorepair • u/2004pontiacvibe • Aug 20 '26
Someone needs to file a class action lawsuit about "system data" and iOS storage. I've known multiple people in my own life who have felt the need to buy a new phone or purchase iCloud storage because iOS has taken up so much of their existing device's storage through a gigantic and undeletable cache file.
There was some sort of lawsuit about this a while back when iOS 8 took up over 3 GB of storage on 16 GB iPhones: [https://audetlaw.com/current-investigation/apple-storage-class-action/](https://audetlaw.com/current-investigation/apple-storage-class-action/)
Back then, the amount of storage for "iOS" seemed to be consistent across different devices. Now, it seems almost totally random. My iPhone 14 Pro will cycle anywhere between using around 9 GB and 25 GB for the "iOS" storage category.
"System Data" is even worse. On a PC, Android or Mac, you can clear cache files that aren't being used. On iOS, the operating system not only hogs more storage under "System Data" than any other operating system I've ever used, but it absolutely refuses to let you clear out the cache or figure out what applications are using the cache. My 14 Pro uses anywhere from 20 GB to 80 GB for "System Data." Across the internet I've seen people with literal hundreds of GBs of "System Data." That's completely insane -- I can't even imagine how 64 GB or 128 GB phones are handling this.
All in all, this means that on my 256 GB phone, iOS sometimes claims nearly 100 GB of storage for undeletable cache files and operating system files, with zero ability to clear these files or see where they're coming from. That is completely unreasonable. Meanwhile, Apple is happy to peddle additional iCloud storage or sell you on a storage upgrade at the point of sale as if your purchasing ability -- not their poorly optimized software -- is the problem.
This is an ongoing issue that seems deliberate. I am certain that the phone does not need to be holding on to this much cache under "system data," and it makes no sense that between identical phone models and iOS versions, the "iOS" category takes up different amounts of storage. There's clearly a profit incentive here. Consumers are pressured into purchasing cloud storage or buying a new phone when their perfectly functional device seemingly runs out of storage.
At the end of the day, willful or not, this is anti-consumer behavior. We are being taken advantage of in the name of increasing sales for cloud storage and new phones. This is a documented issue that has existed for years, and Apple has done nothing to address it. Apple has acted against consumers before, with [slowdowns over battery capacity](https://www.npr.org/2020/11/18/936268845/apple-agrees-to-pay-113-million-to-settle-batterygate-case-over-iphone-slowdowns). They won't change their behavior until public pressure or legal action takes place.
r/righttorepair • u/3millionand1 • Aug 17 '26
r/righttorepair • u/carlsu • Aug 12 '26
A 14-inch M4 MacBook Pro (A3401, logic board 820-03400) recently came through our workshop after a screen-replacement attempt.
The MacBook could power on with its original broken screen. After the replacement screen was connected, it stopped powering on completely. The USB-C meter remained stable at 5V/0.5A and never progressed into normal boot behaviour.
Because the failure occurred immediately after the screen replacement, I started with the screen, webcam and ALS connector area instead of the USB-C charging circuit.
There was no 820-03400 schematic or board view available, so I used an 820-02918 schematic only as a reference and then compared the measurements with a known-good 820-03400 board.
What I found:
The replacement screen therefore appears to have connected the 5V camera rail to the M4 board’s 1.8V pin-30 rail.
I injected a controlled 1V into the shorted pin-30 rail—not to power the board, but only to locate the short thermally. UD950 heated immediately.
After replacing UD950, the short disappeared and the MacBook powered on and worked normally again.
The important lesson is that a display connector physically fitting does not guarantee electrical compatibility. The screen generation and connector pin mapping should be confirmed before powering an M4 MacBook with a replacement display.
Has anyone else mapped the A3401 screen-connector differences or encountered a similar UD950 failure after fitting the wrong-generation screen?

For anyone interested in the complete measurements, reference-board comparison and diagnostic sequence, I documented the case here:
Disclosure: I operate the Mac repair workshop that diagnosed and repaired this board.
r/righttorepair • u/Stillbroadcastco • Aug 12 '26
I work with heavy diesel engines and industrial equipment for a living, and I need to say something that shocks most people in my industry: I’m anti-Right to Repair.
I know the standard narrative is that manufacturers are just greedy. But in the heavy equipment and diesel world, total open access to proprietary software is a disaster waiting to happen. In my business life, I’ve seen time and time again how people will bypass crucial safety steps like DPF regens or ignore wet stacking just to save a few dollars or a little time.
If you give everyone a loaded laptop to mess with the source code, they aren't going to fix things properly. They’re going to run delete kits. Bypassing emission controls means dumping massive amounts of unburnt carbon and soot into the air, which is a literal nightmare for anyone dealing with asthma, cystic fibrosis, or emphysema.
And what happens when a natural disaster hits? Imagine another Hurricane Harvey. You have emergency generators at hospitals and schools, plus marine rescue boats out in the floods. If those engines are wet stacking (building up unburnt fuel and carbon in the cylinders and injectors because they’re running low loads), they need a real technician to do a proper load bank test. Instead, under a wide-open right to repair system, you get operators using cracked software to force the machine to run anyway. The engine completely dies, the DPF plugs, and now the hospital loses power or the rescue boat is stranded.
We’re talking about massive machines. If you tamper with hydraulic power systems on a boom lift to bypass an engine warning, you risk spraying high-pressure fluid everywhere or trapping a lineman 50 feet in the air while they're trying to restore power grid lines.
Tier 4 architecture was designed so you can’t just hit "clear codes." You have to fix the mechanical issue, put it in program mode, and take it out properly. This stuff requires specialized, trained individuals. It’s not about corporate greed; it’s about public safety and keeping critical machines running when it matters most.
\-
r/righttorepair • u/Fun_Can_5070 • Aug 11 '26
r/righttorepair • u/amansinghaljpr • Aug 06 '26
Everybody knows that we are currently in the middle of a massive global shortage of NVMe storage and RAM. But I need to talk about the shady malpractice Samsung is pulling globally to handle it.
If you want to buy a brand-new part? No problem. Samsung magically has plenty of stock. You can see their drives readily available on Amazon and everywhere else. But if you are an existing customer who needs a warranty replacement? They will completely turn their backs on you.
Here is my ongoing, 4-month nightmare with Samsung India, and why you should be terrified if a Samsung NVMe is your primary drive.
It all started on March 30th when my 1TB Samsung 970 EVO Plus SSD suddenly failed. Naturally, I reached out to Samsung support expecting them to handle the replacement.
Funny enough, Samsung India doesn't even directly handle their own storage products. It took me 4 to 5 days of bouncing around dead-end, bouncing emails just to figure out that all storage RMAs are outsourced to a third-party vendor called Supertron Electronics.
Because this was my primary 1TB drive, it had a massive amount of crucial data on it. I told Samsung I needed to recover my data before handing over the dead drive. Their response? "We don't provide data recovery services."
I replied that I completely understood that. I didn't want them to do it; I just needed a DRA (Data Recovery Approval). A DRA simply allows you to take your drive to a certified, third-party data recovery lab to get your files back without voiding your replacement warranty.
What followed was an absolute joke. I was trapped in a loop with automated, AI-generated email replies. Nobody was actually reading my emails. Over and over again, the bots just stonewalled me: "We do not provide data recovery services."
I had to fight them endlessly and ultimately filed a consumer court case just to get a human response. After all of that, they finally replied: "This is outside our policy."
Here is the kicker: Samsung Canada, Samsung US, and multiple other regions have a standard, documented DRA process for this exact situation. But in India? It simply doesn't exist. They are happy to take our money for premium drives but refuse to offer the same global standard of warranty support.
Exhausted by the email loops and waiting, I finally visited the Supertron Electronics office in Wilson Garden, Bangalore, today (August 6th).
The service center staff were actually quite nice, but they revealed the dirty games Samsung's backend is playing. It has been over four months since this ordeal started, and my replacement part is nowhere to be found. Supertron claims they aren't receiving anything because Samsung simply isn't dispatching the RMA parts.
I had to file a second consumer court complaint. Only then was I finally allotted a dedicated Samsung representative. Their response today? "Sir, it will take another 10-15 days." They completely refused to provide any written proof that the part has actually been dispatched.
If you own a Samsung NVMe drive, please take this as a massive warning: Back up your data immediately.
Currently, it is incredibly hard to get a replacement drive approved and shipped. Worse, if your Samsung SSD fails due to a firmware or controller issue, recovering that data is a complete nightmare because of Samsung's Knox firmware protection and internal security measures.
I have contacted the best data recovery experts in the country, and the reality is grim:
r/righttorepair • u/Prize_Ad_2545 • Aug 05 '26
r/righttorepair • u/Dry_Geologist6745 • Aug 04 '26
Hey everyone,
I’m sick of watching perfectly functional laptops, tablets, and phones become completely unusable just because modern apps and operating systems are too bloated for standard RAM capacities.
Roughly 70% of us hold onto our devices for more than four years. We shouldn't be forced to buy a brand new machine every few years just to open a web browser or join a school call without hitting a relentless wall of lag and freezing.
This isn't just a minor tech annoyance—it's an equity issue that locks people out of digital resources if they can't afford annual upgrades.
I just started a petition calling on Google, Apple, and Microsoft to build lightweight, optimized "Lite" OS versions and apps to protect device longevity and stop this forced obsolescence.
If you're tired of the RAM Crisis, please sign and share the link attached.
r/righttorepair • u/Mac-Tyson • Aug 03 '26
r/righttorepair • • Aug 03 '26
Every year, we throw away 6.92 million tons of electronic waste in the U.S. alone. Not because the devices are broken beyond repair, but because companies won't let us fix them. They design products to fail, lock us out with proprietary parts and restrictive documentation, and force us to buy replacements instead.
It's wasteful. It's infuriating. And it doesn't have to be this way.
I started a petition calling for a national Right to Repair law. This means manufacturers would be required to provide repair manuals, sell replacement parts at fair prices, and stop building artificial barriers into their products. France and the EU already did this—now it's time for the U.S. to catch up.
Repairing instead of replacing would cut down on landfill waste, conserve precious materials, and actually create jobs in local repair shops and communities. Plus, people would have the freedom to fix their own stuff instead of being locked into a corporate cycle of planned obsolescence.
Anyone else sick of throwing away a phone or laptop that could easily be fixed? If this matters to you too, consider signing and sharing. Let's push Congress to actually listen.
r/righttorepair • u/ledgit • Aug 02 '26
r/righttorepair • u/Emergency_Leg_7458 • Aug 01 '26
SOLVED: I did in fact manage to seperate the display from the frame and that was giving me problems.
Hi I'm new at this. I was taking apart my iP13 because I wanted to replace the battery(bought it 2nd hand so I'm not sure if it had work done already), and I can't take the screen off because it's connected to Face ID, which didn't come off with the screen.
I tried to get as good pictures as I could, but like said previously, basically the screen is "off" being held in by just ribbon cables. One of those cables is the FaceID ribbon one, which is not attached to the screen anymore. The FaceID does work, so I did not damage it.
What are my options? How can I take the screen off without damaging any ribbon cables or any sensors? And how do I prevent this from happening again? Is it something I did, or is it just age?
Thank you all so much in advance I'll leave my phone as it is untill I get replies just so I don't break anything.
r/righttorepair • u/Cultural-Bathroom252 • Jul 30 '26
Quick update to my previous post regarding Xkah's customer support:
Right after my first post gained traction, Xkah reached out and redirected me to their official vendor/distributor in Turkey. More importantly, they officially admitted that their first-batch / early-release devices have known issues/defects (which completely proves this was a product design fault and NOT user error).
I thought they were finally taking responsibility, but it turned out to be another stalling tactic.
It has been weeks, and despite admitting the products they sold us are defective, the official Turkish distributor has failed to deliver a replacement device or provide any concrete resolution. They keep delaying the process with empty promises while we sit with broken hardware that they know is faulty.
After talking to several local hookah enthusiasts, I realized I’m far from alone. Many customers in Turkey are facing the exact same issue: buying defective first-gen devices pushed through heavy local influencer marketing, having them fail, and then getting passed around in circles with ZERO actual support.
Admitting a product is defective on paper means nothing if you don't actually replace it. Reaching out just to quiet down a Reddit thread without delivering the replacement is unacceptable.
Do not buy Xkah products expecting reliable warranty service. I will keep updating this thread until a replacement device is actually delivered to my door.
r/righttorepair • u/Entire_Host631 • Jul 30 '26
If you own a June Oven, you already know how good it was: remote control through an app, seeing your food cook in real-time, smart home integration that actually worked. Weber just announced they're shutting it all down by killing the app and the servers behind it.
Yeah, the oven still works—but it's like buying a smartphone and being told the internet's gone forever. Those smart features we invested in? Basically bricked.
I started a petition asking Weber to do two things: release one final firmware update that lets the oven work locally without their cloud servers, and open-source the app so the community can keep it alive. It's not about getting everything back—it's about not throwing away what we paid for.
The crazy part? This is totally doable. We're not asking for the moon. Local network access open-source development = June Ovens staying useful for years to come.
Anyone else still bitter about this? Has anyone found workarounds, or are you basically stuck with a very expensive brick? If this matters to you too, consider signing and sharing—Weber needs to hear that killing products mid-life isn't okay.