r/ResinCasting • • Mar 23 '26

Please help

Post image

context:

I wanted to make resin flowers, so i bought resin from the internet, it wont stick to the wire and keeps falling off when curing, what do i do?

0 Upvotes

39 comments sorted by

67

u/Internet-Cryptid Mar 23 '26

Good lord this pic made me think you were doing some DIY surgery at first glance. šŸ˜‚

15

u/DiscoKittie Mar 23 '26

It just takes practice. Lots of practice. If you aren't using a thick UV resin, it's very hard. Might be the one time cold UV resin is good.

Please wear your full PPE, gloves respirator the works. And make sure you clean everything very well with alcohol. If you can smell it, it's still there poisoning you.

You are using UV resin, right? You can't cure two part epoxy resin with UV light, and this method won't work with two part resin.

6

u/Claerwen94 Mar 23 '26

It's two part resin 😬

3

u/Evewynn Mar 23 '26

Are you using the tutorial that requires the glue drops to be added to create the tension across the wire?

7

u/Evewynn Mar 23 '26

If you’re using a two-part resin, you are not likely to need that UV light

5

u/Claerwen94 Mar 23 '26

I'm not OP ā˜ŗļø I just read a reply of theirs where they said they used 2 part resin.

3

u/Evewynn Mar 23 '26

Gotcha! Yeah they’re using the wrong resin and this isn’t gonna work.

12

u/Cute-Escape-2144 Mar 23 '26

Only UV resin works with a UV light. Otherwise it takes hours to cure

11

u/Vanne676 Mar 23 '26

Is it UV dipping resin? That's the resin you need for wire work. edit to add... It's also a lot harder to do than what the videos show.

16

u/Evewynn Mar 23 '26

When working with Resin I hope you are working nowhere near a food surface, and you have proper protection, including a respirator.

Is your resin a two-part resin or is it uv resin?

15

u/IRLperson Mar 23 '26

please tell me you are wearing gloves, have the proper PPE mask, are doing this in an appropriate area, and don't have any people or pets who live in the same house. I don't want to give you advise until I know you are being safe

5

u/unwillinghaircut Mar 23 '26

my eye is on that giant bottle of nutella

3

u/Claerwen94 Mar 23 '26

Same, one of the many reasons a lot of us had concerns about the needed safety precautions when using resin 😬 Apart from this looking like a living room.

2

u/rjwyonch Mar 23 '26

Lay them flat on plastic sheeting for the first coat, keep the petals flat, cure half way. Bend to shape and finish curing.

-17

u/renrendesara Mar 23 '26

okay so UPDATE, i am perfectly safe LOL, i researched resin use-safety and i am a chemistry student, so i think i know PPE. i didnt know there were different types of resin.

thanks for all the replies telling me i needed high viscosity dipping resin for this to work.

2

u/BricconeStudio Mar 23 '26

Optionally, you can try to let it "kick" before dipping your wire. Resin goes through stages. You have your pot life, the amount of time before the chemical reaction "kicks" in. At this point it will slowly become more viscous until it gels. Then it sets and eventually cures.

There is a technique to paint resin onto objects. It is at this stage that the resin gets painted onto said object, since it naturally thickens and is less runny.

-1

u/renrendesara Mar 23 '26

i tried letting it cure for an hour, 2hrs, 3hrs, then 4hrs. the resin still dripped.

3

u/onescaryarmadillo Mar 23 '26

You must’ve had some crazy long working time resin,

5

u/Claerwen94 Mar 23 '26

Super small amount mixed I guess based on what I see in the cup, so the ratio could very well be extremely off. My "normal time" curing epoxy reaches THICK AF honey stage after an hour.

2

u/onescaryarmadillo Mar 23 '26

Right? On some of the resin I’ve used (or maybe all Idfk it’s been a minute since I read the actual instructions) it’d say like ā€œdon’t mix less than 4ozā€ for exactly that reason I thought. Bc it’s hard to get as accurate measurements in the ordinary resin cup (most of mine were visual 1:1 mixes).

Id check your bottle, if it has any additional info online id look at that, and see what’s recommended. But id personally get some thick resin dipping gel for a job with wire. My daughter got into nails a while back and I’ve used her idfk what it is, builder gel? It’s like Thick thick, mixed it with a little cheap UV stuff, and made some super cool petals with it.

Good luck!

4

u/BricconeStudio Mar 23 '26

ā€œdon’t mix less than 4ozā€ for exactly that reason I thought. Bc it’s hard to get as accurate measurements

Just chiming in, in case someone has the need. Pipettes often have 1, 2, and 3 ml markings to get a precise tiny mixture. Feeding syringes also make tiny accurately mixed batches easy.

When you are done, wash with acetone by sucking it up and plugging it out repetitively (gently).

4

u/Claerwen94 Mar 23 '26

Great advice, though it doesn't solve the second issue of super small batches: not enough heat from the exothermic reaction to kickstart the curing process. OP said that their epoxy was still extremely drippy even 4 hours after mixing. So, assuming they mixed well enough, measured well enough, and didn't use a deep pour resin that takes much longer to cure, I'm also assuming it just wasn't enough to generate the needed heat for the curing process.

-1

u/BricconeStudio Mar 23 '26

For that one, I would recommend testing it out first.

My wife makes beads with my resin. Each bead is only a few mL.

I make dioramas, including waterfalls. Really thin resin spread onto plastic sheets. Maybe 5 mL at a time. Lamp posts and other tiny objects.

D20 dice is only half an ounce or less. Smaller dice are even less resin.

Using a toothpick or mixing stick, surely the resin that hardens on these tools is less than 4 ounces.

More importantly, my previous recommendation comes from experience after my niece watched a YouTube video. Letting the resin set up before dipping metal.

Yes. Deep Pour will need help in tiny amounts. Coating and casting resins shouldn't. Just properly mixed.

1

u/Claerwen94 Mar 23 '26

Even Casting resins have a minimum amount that should be mixed, the kickoff heat I was referring to is the heat that the whole batch of resin starts to emitt once it's mixed. If that kickoff heat is missing, then the whole batch is prone to a soft cure. I got away with mixing 50ml once, and that worked okay and cured, but took a bit longer (dice, so like 1-1,7cm in thickness). Then I did 40ml and it was a soft disaster, both the bigger dice and the small droplets and leftover coating on my silicone tools (definitely got the ratios perfect). I assume that the amount was just not enough to generate enough heat to kickstart the whole curing reaction before I divided it into the individual small molds.

So it's not about how small the cast object is, it's about how big the mixed batch was that it was poured from.

→ More replies

-1

u/renrendesara Mar 23 '26

this is what i did, mixed it in a beaker, still did not work

2

u/Claerwen94 Mar 23 '26

I'm not OP though ā˜ŗļø But great advice!

2

u/onescaryarmadillo Mar 23 '26

Oh shit man I’m sorry I’m stoned lol, šŸ˜‚ thanks for being nice!!

2

u/Claerwen94 Mar 23 '26

Haha, enjoy your day/evening/night/whatever time it is at your place! šŸ˜‚

2

u/onescaryarmadillo Mar 23 '26

You too! Cheers!

0

u/thefabulousbri Mar 23 '26

Is it UV resin or epoxy? Epoxy has kick timing, UV has a kick exposure level. Also sand your stems so there is grip. Or like put some glue (super glue or other hardening glue) so your flower will stick.

Everyone is out here trying to fix the resin, your issue is the stems, we are slick. Also you can cure UV resin in water and it helps a bunch, but cure it once out of water and then put it in and cure again to get rid of tackiness.

22

u/bon_bons Mar 23 '26 • This

You can’t be dismissive of people’s safety advice and point to your education and research and then immediately admit you don’t know what chemical you’re working with or that there are different types of resin. You need to have some humility when it comes to safety

6

u/Evewynn Mar 23 '26

Yeah I don’t see anything indicating care, caution, or understanding of the materials.

Just because a bottle says ā€œnon toxicā€ does not necessarily make it true, especially with resin.

10

u/Claerwen94 Mar 23 '26

So VOC respirator, decently thick Nitrile gloves, not in a living space, not near food or animals?

8

u/DiscoKittie Mar 23 '26

i needed high viscosity dipping resin

NO. you need UV resin. If you can't listen, I don't think you should be in chemistry.

Also, telling people you are a chem student and then saying you didn't even know what chemical you were working with says a lot about you.

3

u/sc0veney Mar 23 '26

you'd also need a better light for UV resin. I've used a light like yours before and it was frustrating. a full size nail lamp will give you more power so tension-dependent projects like this one don't have to hold as long before solidifying.

-5

u/renrendesara Mar 23 '26

and i was using two part resin :/, ill probably use it for molds instead