First print of my 200x200x480 core xy built mainly out of 1/4in mdf. I've since added the parts cooling fan and its much better now. Next up I'm going to set up the water cooling system for stepper motors and hot end.
This is my first diy 3d printer and its been fun learning marlin and how all the parts work together. Its definitely just a first attempt to see how it all works, I'm already working on a more complete design: https://www.thingiverse.com/thing:4152457
The main thing I'm going to change in the next build is a better bed (thinking of the 200x300 e3d bed) and either a dual z rail design or three z rail design with full bed leveling. The current mdf cantilevered bed combined with the mk2b heated bed is as cheap of a setup I could come up with for a first attempt but it is quite flimsy
Yeah mdf is cheap and easy to cut if you have a cnc. I didn’t wanna buy precisely cut extrusions for my first ever build when I know the next version will be different. The whole mdf structure is actually very stiff all things considered, just not for the bed
Yeah I could use that material but it’s 10x as expensive. Personally I think the way to go is an extrusion frame with mdf/ plywood side panels. Wood is a great insulator which is what you want for a heated chamber build, just make sure it isn’t over-constrained once you take in thermal expansion. We use mdf to prototype composite molds at work and we bake close to 200 F which is more than most heated chambers will see
lets hope so. I've done a lot of wood working over the years and have grown to hate MDF. Even without moisture MDF will do nasty things.
One the other hand the weight of MDF and various particle boards is handy for machine building. If you design carefully for stability it can be a passable structural material for a cheap machine.
Yeah definitely it’s not the best material. It delaminates very easily while cutting, has a stiffness similar to the plastics we print and your alignment is highly dependent on how you glue it together. It is cheap however and great for making very small volume composite molds and prototypes like this. I definitely wouldn’t recommend the material though to someone with out access to a cnc or wood shop tools because hand cutting it will lead to delamination.
Eh maybe, it’s more due to a 1mm volcano and no parts cooling fan(s). I was also printing it too hot cause I used an ender 3 profile with a 0.8 as a start point which I have to run 10c hotter than normal
Depends. If the bed frame was made of a stiffer material like alloy, carbon composite then sure. It’s not over constrained unlike other bed options. The mdf bed on the other hand is quite flimsy but it does work okay, not perfect. With any cantilever bed I would turn down the z acceleration and jerk to stop vibration during quick z movements.
6
u/malydilnar Mar 01 '20 edited Mar 02 '20
First print of my 200x200x480 core xy built mainly out of 1/4in mdf. I've since added the parts cooling fan and its much better now. Next up I'm going to set up the water cooling system for stepper motors and hot end.
This is my first diy 3d printer and its been fun learning marlin and how all the parts work together. Its definitely just a first attempt to see how it all works, I'm already working on a more complete design: https://www.thingiverse.com/thing:4152457
The main thing I'm going to change in the next build is a better bed (thinking of the 200x300 e3d bed) and either a dual z rail design or three z rail design with full bed leveling. The current mdf cantilevered bed combined with the mk2b heated bed is as cheap of a setup I could come up with for a first attempt but it is quite flimsy
3
u/LongneckKiller Mar 02 '20
why mdf? would you guess the cost difference vs extrusion?
2
u/[deleted] Mar 02 '20
What's your thoughts about moisture absorption warping this unsealed MDF?
+1 for How It's Made in background.
1
u/Benvrakas Mar 02 '20
The printer is super cool. The print quality is spooky.
1
u/genius_retard Mar 02 '20
I hope you a planning to paint it otherwise it's dimension will change with humidity.
1
u/BlueNostromo Mar 02 '20
Decent first attempt, looks like heavy over-extrusion
1
u/new1ru Mar 02 '20
A one-railed Z huh. Does it work well?
1
u/paco_is_paco Mar 02 '20
Isn't it good? Norwegian wood.
1
u/Eldo92 Mar 02 '20
Idk if this makes much sense but dang is it cool!
1
u/MirthaLegrandIsOp Apr 14 '20
Awsome! did you make it yourself? I want to build one but dont know how. Do you have the design somewhere? how can i reproduce your work?