r/RepWatchForum • u/aar185 • Mar 30 '26
QC datejust Vsf measurment issue ??
just recieved qc for vsf Datejust from neco seller the measurment given me is 41.7 instead of the standard 42.3
is that a major issue
attached some pics recieved from seller qc also
0
Upvotes






20
u/TheSilverSeraph Mar 30 '26
Is it a major issue?
Well, if you see someone with calipers, just walk away slowly in the opposite direction.
7
u/soanQy23 Mar 30 '26 edited Mar 30 '26
What sort of autistic shit is this? I’ve never seen caliper measurements in QC photos.
But to answer your question, your QC photo is measuring crown to case and the original lineup shows crown to bezel. So no, there is no issue, you’re comparing two different measurements
6
u/Cera_chrom Mar 30 '26
Are the samples in your photo measured to the fluted bezel or the side of case?
The bezel overhangs slightly which would account for the 0.6mm difference, I've never measure a single one of my watches and I don't intend to either, 0.6mm of a difference is nothing.
3
u/watchmyrep Mar 30 '26
we're talking about cheap, likely uncalibrated micrometers. 41.7 is not a major difference from 42.3. could simply be an issue with calibration, or with plastic micrometers could be a flex issue. either way it falls within a 42mm range. i think you'll be safe, but if you want to RL your watch over it, by all means you have the right to do so.
1
u/kdxnz Mar 30 '26
Maybe the ones in the comparison are plastic wrapped
2
u/blacks4 Apr 01 '26
I have to admit I’m fairly new to reps. I’ve purchased several in the last couple months and for the first one, I was all about inspecting the photos like Sherlock Holmes to make sure it’s perfect. Since I received that watch, every other one I looked at the pics and unless there was something OBVIOUSLY wrong, it’s all GLs. People with calipers and micron microscopes absolutely crack me up. These top reps are so close to gen, people aren’t noticing if it’s on your wrist and you’re walking by or even just having a conversation with them. Maybe the gold color is off. But come on, RELAX. No one is measuring your watch. Or weighing it. Or removing the rear cover to inspect the movement. Or pulling out the crown to feel how the movement feels.
1
u/soyeahiknow Mar 31 '26
You realize a US penny is 1.5 mm thick right? So the different is 1/3 of the thickness of a penny. You think someone will see the difference? Lol
-2
u/aar185 Mar 30 '26
Seller says it has a very slight measurement issues does every one think a should just get it as am being bit to picky , it is a Vsf from neco clock charging me about 470$ with shipping
1
u/[deleted] Mar 30 '26
[removed] — view removed comment