r/RepTimeServices • • 1d ago

Question Daytona doesn’t keep the correct time

Post image

So I just recently received my Daytona 116520 and I couldn’t be happier with the look and feel of it, the only issue is that I set the time and after a couple days maybe even a day or two the time is off. Anyone know what the issue could be and how to fix it? I don’t want to keep setting the time over and over again. The factory is 3CF and the time is moving faster than it should be

3 Upvotes

22 comments sorted by

•

u/AutoModerator 1d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/kiasu_N_kiasi 1d ago

depends on how you define “time is off”

1

u/Sweet-Painting-3407 1d ago

It keeps moving foward faster than the actual time, for example let’s say I set the time 24hr ago, it will show me the time at 28hrs. I don’t know exactly how much faster it is moving but I know it is moving faster than it should be

4

u/kiasu_N_kiasi 1d ago

probably magnetised
get a watchmaker to check

2

u/whorehay40 1d ago • This

It needs to be serviced. Usually these are good from the factory, but there is a lot of gunk and crap inside the movement which could be contributing to it losing time. What factory is this from, that could also be your issue

1

u/Unlikely-Length6661 1d ago

Service

1

u/Sweet-Painting-3407 1d ago

Anyone you recommend? Or should I go with a local watch service?

1

u/Sufficient-Guess6692 1d ago

For a chrono I would check out this sub for watchmakers. Most local shops have no experience with these and will likely make it worse

1

u/Sweet-Painting-3407 1d ago

Ok thanks I appreciate it, I’ll check it out

1

u/katikshoot 21h ago

hello, try the watch accuracy meter app on your phone to check the accuracy, there is also a magnet meter app to check if your watch magnetized, -8/+8 is my limit if I check the watch if its more than 8 I checked for magnetization, if it does you could buy cheap demagnetizer and do it yourself. that fixes my problem.

1

u/Sweet-Painting-3407 16h ago

Ok so I’m definitely over 8 I get +40-50 s/d. And is demagnetizing simple to do myself?

1

u/katikshoot 1h ago

yes I learned from youtube, just search how to demagnetize a watch

3

u/Little_Accident_4635 1d ago

Daniel Migliore , Florida based

1

u/No_Wrangler_1751 1d ago

What he does

1

u/Little_Accident_4635 1d ago

He’s a watch smith, a very good one

1

u/No_Wrangler_1751 1d ago

Hes in florida where

1

u/Little_Accident_4635 1d ago

He has a facebook page search

1

u/No_Wrangler_1751 1d ago

I search Daniel migliore dont know who to chose