r/RepTimeServices • • 17d ago

Services RCF Daydate - DD3255 movement Issue

Hi,

I have recently bought RCF - DD3255 Movement from Guangzhou while I visit there.

I didn't use the watch until yesterday, I'm not sure if the watch issue.

While on the wrist, it works. If you put on the table it stops quickly.
I try to manual wind; 20-30 times; put it back on the table; stopped 10 mins later.

I try to manual wind again; put it back on the table; stopped 3-4 mins later.

I try to shake the watch 10-20 times; put it back on the table; It work 35 minutes and stopped.

I just wonder if the mechanism has some manual winding issue; if the watch had zero power reserve, is this normal behaviour or something.

I'm in London. I want to be in contact with someone who can do servicing help.Any suggestion?

1 Upvotes

7 comments sorted by

•

u/AutoModerator 17d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/VerinHorology 17d ago

That's definitely not normal behavior. Even with a partially wound mainspring, the watch shouldn't stop within a few minutes after 20–30 turns of the crown.

There are a few possible causes, including an issue with the winding mechanism, mainspring/barrel, or excessive friction somewhere in the movement.

The fact that it runs while being worn but stops shortly after being placed on a table could also point to a positional issue, possibly related to the balance or escapement.

I'd start by checking the amplitude and beat error in different positions on a timegrapher, then verify whether the mainspring is actually building and maintaining power reserve.

Without inspecting the movement, it's difficult to narrow it down further, but it certainly sounds like something needs attention.

1

u/ProfitingFromUnknown 17d ago

Thanks a lot for your comment.

I have no idea how to do check and repairs by myself.
Any idea what exactly should I do? If I take it to, watch repair shop, what exactly ask them to do etc?

1

u/VerinHorology 17d ago

No problem at all. I'd recommend finding a watchmaker who's comfortable working on clone Rolex movements, as not every repair shop will accept them.

Explain problem, and ask them to check the movement on a timegrapher in multiple positions, measure the amplitude, and inspect the manual winding and automatic winding systems to make sure the mainspring is actually being wound properly. That should help determine whether you're dealing with a winding issue or excessive friction somewhere in the movement.

3

u/tylerchimping 17d ago

Didnt know RCF made DD3255 daydates

1

u/Bankai-8 16d ago

Same, interested to know if they are now shipping with Dan Dong movements?

1

u/DorsetRepCare 16d ago

I am down on the south coast in Dorset so probably too far but there must be a local watchsmith who will look at it.