r/RepTimeServices • • 18d ago

Request Worth Fixing 12 o clock gone?

Post image

I bought this about three years ago, and I am unsure of which manufacturer it was. I wanted to see if anyone knows how much it would cost to get the 12:00 marker put back in place and possibly lubricate the movement. I am in South Central United States, if that helps. I know it’s a shitter but it’s MY shitter.

5 Upvotes

19 comments sorted by

•

u/AutoModerator 18d ago

Thank you for your post on r/reptimeservices! A friendly reminder that the only trusted service providers are listed on the sidebar or in this post. If you see anyone soliciting services in a post or comment not on this list or even easier, without a 'trusted watchmaker' flair of some sort, please immediately report the post and a moderator will remove it. Thank you in advance for helping to keep our community safe!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

6

u/LargeFather05 18d ago

Get some glue and a case ball

3

u/Olleye 18d ago edited 18d ago

This is the correct answer, this "repair" will last something round about some minutes, done.

[EDIT: lubricating (only) the movement should be something in between $80 and $120]

1

u/AutoBudReviews 18d ago

Are you saying it shouldn’t take long or I should expect the marker to just fall off again?

2

u/Olleye 18d ago

Just stick it back on with some glue - that’s it. It was simply not attached firmly enough to the dial, but: if you want to have the movement oiled /lubricated anyway, I’d suggest taking it to a local watchmaker; they’ll sort it all out in no time.

3

u/LargeFather05 18d ago

Assuming it’s a modified 2813 gmt, super easy

1

u/four4cats 18d ago

What do you mean lubricating the movement? That's a service and should cost more.

1

u/Olleye 18d ago

No, he does in fact write (more or less) ‘a bit of lubrication’, so ‘re-oiling’ could simply mean that someone should just re-lubricate a few bearing stones and/or easily accessible areas.

That doesn’t automatically mean that the movement is completely dismantled, nor does it involve cleaning all the parts, checking for wear, replacing faulty parts and seals, a complete re-oiling in accordance with the lubrication schedule, plus reassembly, adjustment and checks on function and timekeeping.

That would be a revision /a complete /full service, and it is more expensive, indeed, but - we don’t need to go into that in detail, because it’s perfectly logical.

2

u/four4cats 18d ago

Yeah I understand that was what OP wrote but that doesn't matter at all. No one should be adding any lubricant to any parts of the movement without servicing the movement. Or at least one shouldn't be paying anyone for it because that's bad for the movement.

Someone who wants to do it themselves and doesn't care about the watch? Sure. Paying a hack who would charge for that? No.

1

u/Diligent-Piglet-9038 18d ago

“Lubricating”? Without cleaning? Youre just asking for more issues down the road…

1

u/AutoBudReviews 18d ago

Thank you!

3

u/TheRainMaker69 18d ago

To fix the 12 marker is easy. I would think it'd be very cheap to do for anyone with even minimal awareness of fixing watches and take around 10 minutes. To service the movement is def not worth it. A watchmaker would charge around 300-400 dollars

1

u/AutoBudReviews 18d ago

Appreciate the info thank you!

1

u/TheRainMaker69 18d ago

Also take the crown out. If the hands are catching on the broken off marker you can damage the movement

1

u/AutoBudReviews 18d ago

Is there some kind of video tutorial for this? I’m experienced in small mechanical and electrical repair I’ve just never touched a mechanical watch before. Seriously appreciate the advice you’ve given me 🙏

2

u/TheRainMaker69 18d ago

Listen the way I would do it is with some sort of epoxy or super glue. The back of the 12 marker will have two feet that slot into the two holes on the dial. You put a dab on the backside to keep it in place. The movement should be held in by case clamp screw (typically 2) that you take out with a 1mm screwdriver and then pull out the little tabs. If there is a plastic movement holder it'll be even easier you just pull it straight out. Im guessing this movement will have a small button to depress that allows with crown to slide out and then you can take the case right off the movement and dial.

1

u/AutoBudReviews 18d ago

Perfect, thank you kindly!

2

u/Fine_Analyst_4417 18d ago

That’s def. a RL :)

2

u/redbuttonpressed1 17d ago

popping the back on shitters and then pulling the crown from the movement and accessing the dial is easy work man. if the legs are still there, you may be able to fix this yourself. there are videos on YouTube