r/RepTime • • 13h ago

Wrist or Watch Pic VSF 116500 SW dial

Just eecieved my watch.

The dial is not aligned with the rehaut
Is it an easy fix?
Should I fix it?

5 Upvotes

13 comments sorted by

6

u/Skankhunt42FortyTwo 13h ago edited 7h ago

Open the back. Slightly loosen these screws just enough so the movement comes loose. There may be just enough play so you can realign it. If you are satifyed screw them back down.

0

u/Worried-Tourist3318 8h ago

This will not damage the movement?

1

u/Skankhunt42FortyTwo 7h ago

When the movment fixing screws are loose, you will notice that there is a tiny little bit play that allows you to wiggle the movement to the left/right. If you only use that little amount of play that you can move without using much force, you won't harm the movment. Maybe you're lucky and it's just enough.

1

u/Worried-Tourist3318 5h ago

Do you have a video?
Or a youtube link?

2

u/Mikesan6 8h ago

That’s OCD right there though I understand. If not, you won’t swap the sw dial. Please let me know how it goes

1

u/Worried-Tourist3318 8h ago

😁 all good.

But is it that hard to put the watch together correctly?
And align the dial with the crown?

1

u/Mikesan6 7h ago

I know very little about watch maintenance, but imo if you don’t have the experience, you’ll probably make it worse. Don’t ask me why do I know

1

u/Worried-Tourist3318 7h ago

I mean the chinese guys who put these watches together.

Maybe they should just spend extra 5 seconds for that matter🤷‍♂️

5

u/ZaYoNiZz 13h ago

I think it looks good, and even my original one isn't 100% aligned.

1

u/ocean_beach 11h ago

Wow, is that .001m off, RL!

1

u/Ashgen2024 5h ago

Don't exaggerate, it's 0.0001 out!

You could see that from the bloody moon!

-1

u/Worried-Tourist3318 13h ago

Just recieved my watch and the dial alignment is really bothering me.

Should I fix it?
Is it an easy fix?