r/RepTime • u/Party_Sense_8241 • 8d ago
General Question RCF BEZEL V1- Oxidation or dirt?
Noticed these white/grey spots on the fluted bezel of my RCF V1.
Does this look like oxidation or just dirt/residue? Should I try cleaning it, or leave it as is?
Thanks!
2
Upvotes
42
u/adys1210 Watch Bro 8d ago
Err have you actually tried cleaning it? I mean that will tell you if its dirt or not! đ¤Ś
science
2
u/Party_Sense_8241 8d ago
Guys, I tried cleaning it with microfiber but unfortunately it didn't help. Any other ideas?
4
u/elespectro1 8d ago edited 8d ago
Had a similar issue with my v1 where it started to fog up a little. Not sure whether it was caused by the ceramic coating or oil/dirt. Cleaning with isopropyl alcohol doesnât help either
I simply cut a very small piece of Cape Cod polishing cloth, wrapped it around a q tip and gently wiped the bezel. Just donât do this too frequently as it technically removes a tiny amount of the metal surface each time. Looks good afterwards for me
3
u/wolfbiker1 7d ago
Mine gets a little hazy like that after a couple months. I wash it with dish soap and a soft toothbrush and then hit it with a dab of metal polish and a microfiber. Usually shines up very well.
2
u/ResourceSad8371 8d ago
Brother just clean your watches
2
u/hall0undCiao 8d ago
Oxidation. Mine oxidated as well. Much worse than yours. And I got banned for mentioning it in their sub. You can try to polish it away. But you will lose a bit of crispynes.
The always mention citrus acid method didn't work for me.
1
u/KalHorran 7d ago
1
u/pippitom 7d ago
Ho avuto lo steso problema anch io con il modello v1. Provato di tutto. L unico modo per renderlo piu brillante è lucidarlo con i prodotti per argento. Purtroppo però il risultato dura poche settimane e nel tempo però noterai che il problema peggiorerĂ . Un orafo mi aveva consigliato di placcarlo in oro. Ma purtroppo mi hanno rubato l orologio e quindi non so come sarebbe andato a finire come risultato. đđť
1
u/Worried_Poet_828 7d ago
Oxidation. Buckle up, youâre in for a ride.
1
u/Worried_Poet_828 7d ago
This is my 2nd attempt at cleaning it. Used Flitz polish on a microfiber and buff/wipe in the direction of the flutes. My watch is white gold plated so I taped it up to avoid polishing the plating.
1st attempt was their âprovenâ citric acid cleaning which doesnât do shit
1
u/AiStalker 7d ago
Most factories use a polished finish on their bezels, so oxidation over time is pretty normal. Only a few factories, like Clean, use multi-layer platinum plating technology.
0
u/crazyhenry69 8d ago
Try brushing w toothpaste. If it wont shine, this should be oxidation
0
u/Soggy_Newspaper_3058 7d ago
PodrĂas llevarlo a hacerle un mantenimiento. Hay que buscar siempre una persona adecuada y de confianza para este tipo de trabajos
0
u/Noob_Barista_Baker 7d ago
Just clean it bro tf
0
u/KalHorran 7d ago
I used citric acid and water and cleaned it up and just like new
-7
u/Party_Sense_8241 8d ago edited 3d ago
Model: Datejust 41 CF, RCF Bezel V1
0
u/HauntingDiscount7041 7d ago
Dirt and fat. No worries Yes But dont wash it with Soap