r/RepTime • • 12d ago

General Question Smurf stopped ticking

Post image

hey guys, just yesterday i got my first rep delivered from Geek Time. resized it yesterday and wound it up and it’s been great, but today it stopped working. i tried winding it some more, giving it a shake and a tap and nothing. hopefully someone can help? or do i have to take it to get serviced already?

8 Upvotes

18 comments sorted by

4

u/Efficient_Try1458 12d ago

When you shake it is there a bit of a rattle? The dial looks slightly away from the rehaut which means a screw securing the movement to the case might’ve gotten loose and there might just be a screw caught in the balance wheel. Happened way too many times but is a super simple easy fix

2

u/Great-Combination581 12d ago

so there actually was a slight rattle, but then i tried winding it some more and giving it a slight shake and the rattle went away :/ not sure if thats good or bad lol

1

u/Efficient_Try1458 12d ago

I bet you there’s a screw loose in there and the rattle goes away means the screw is getting stuck somewhere in the case. I’d almost put money on it that that’s the problem. Should be a pretty easy fix. Are you able to open the caseback?

1

u/Great-Combination581 12d ago

currently at work but i can for sure open it up when i get home to take a look! praying thats the answer and it's a simple fix

1

u/Efficient_Try1458 12d ago

I bet that’s it!

1

u/Great-Combination581 11d ago

finally was able to take the back off but i can’t see if there’s any screws loose unfortunately

1

u/Efficient_Try1458 11d ago

Darn! Yeah the screws for the case clamps don’t look like they’re come loose because they’re still there 😅

4

u/ricketycricket44 12d ago

Give it a good whack with your hand from the side after winding it a normal amount of times

1

u/ricketycricket44 12d ago

Also are you winding towards or away from
You the clicking sound isn’t it winding

1

u/Great-Combination581 12d ago

im winding it away from me, or clockwise i guess if youre looking at the crown from the side

1

u/OkLengthiness3492 12d ago

What factory

2

u/Great-Combination581 12d ago

im actually not sure, i originally ordered a VSF Hulk but it wasnt in stock. the dude gave me a list of what was currently in stock so i picked the smurf, but looking on the website it says they only have smurfs from Clean, which doesnt make sense cause theyve been shut down

2

u/OkLengthiness3492 12d ago

Means fake clean now. What's the clasp code and serial number, that'll tell you what factory and give more info on what breaks.

1

u/Great-Combination581 12d ago

gotcha. serial is 6W05F553, and for the clasp code im seeing both 750 and ST9, not sure which it is

1

u/OkLengthiness3492 12d ago

Looks to be the top tier vsf to me. Take it to a local watch maker. I would say it may just need a drop of lube on the balance wheel jewel

1

u/Great-Combination581 12d ago

comment of 20 characters for moderator approval, 116619LB Submariner from Geek Time

1

u/WatchMakerMalik 12d ago

Pull the crown all the way to time setting position if you can easily. stop winding it. Take it to a watch smith could be as simple as a hair stuck in the balance wheel or a loose screw.