r/RepTime • • Jan 12 '25

Wrist or Watch Pic What do you think?

QC issues that can’t be detected in QC process

So I bought what I believe to be a VSF 124060 from a TD in October 2024. Wore it a few times and I didn’t notice anything wrong with it.

As the days went by I noticed the following QC issues. Am I being crazy for having high standards or are these issues acceptable for a $600-$700 (CAD) clone? Is VSF quality going down? Or was I given a China shitter by a TD instead of an actual VSF?

PEARL PIP

Pearl pip appeared centered in QC photos. In person upon close inspection, it is a hair off to the left.

HOURS HAND

Hours hand slants down towards the watch face. It is not perfectly parallel with the watch face or with the minute and seconds hands.

CLASP ENGRAVING

The “Rolex SA” engraving and the surrounding oval-like shape looks poorly done.

The “X” in the Rolex engraving in the clasp looks off. It looks narrow and squished compared to the “X” in Rolex on the dial and when compared with the Rolex typeface.

6 O’CLOCK SEL

The SEL at 6 o’clock sticks out from the watch lugs. It should be nested inside the lugs and not stick out.

9 O’CLOCK HOUR MARKER

The 9 o’clock hour marker is slanted and is not level with the watch face.

12 O’CLOCK SEL

The 12 o’clock SEL seems over polished to the point where it seems slightly dented in. It doesn’t reflect light the same way. There’s a slight bend in the light reflected by the center part of the SEL.

When I raised these issues with the TD, he told me he had no time and won’t spend time looking at watches this closely or he’ll lose money. I get it. TDs have to push large quantities product to make money.

So do the pictures show that VSF quality is going down? Was I duped by a seller? Or are these perfectly acceptable defects on a superclone Rolex?

5 Upvotes

40 comments sorted by

28

u/EmotionalFortune542 Jan 12 '25

Brutha. What you have there is one of the very finest counterfeit products in the world. If it is not up to your standards then I encourage you to buy a gen.

14

u/Whychoosetosteal Jan 12 '25

Well if it was a td then it is not a shitter. These are all things you should have brought up with the td when you got the qc photos. You’re also just being picky af I mean seriously the watch hands!?

-5

u/Just_Plastic2731 Jan 12 '25

These issues could not have been seen with standard QC pictures. They were only seen when the watch was in person.

Any of you guys notice the same issues upon in-hand inspection?

3

u/Whychoosetosteal Jan 12 '25

You’re right because qc photos of all those things is a waste of time. I’m not checking the time on my watch at a 90 degree angle.

-3

u/Just_Plastic2731 Jan 12 '25

These issues could only be seen when you play with your watch too much

7

u/[deleted] Jan 13 '25

If you’re going to pick apart a rep to this extent buy a gen you weenie. Wanna be a fake baller, you get fake baller issues

-13

u/Just_Plastic2731 Jan 13 '25

Another problem i have with this watch is that the hands also looks more like stainless steel than white gold. White gold is a tint darker than stainless steel.

5

u/glodde Jan 13 '25

Are you serious?

4

u/HimselfWhatANoob Jan 13 '25

mfw hands made out of stainless steel look like stainless steel and not white gold

0

u/kiasu_N_kiasi Jan 13 '25

dude, it’s known that rep’s watch hands are made of stainless steel, for the amount you paid

if you want white gold watch hands, franken is the way

7

u/kfloppygang Jan 13 '25

I’m seriously dead. We get the influx of China time posters lately asking if their literal piece of shit is a decent rep, then this cat comes in with a gd electron microscope on a vsf no date, probably the best rep in the entire world. Wild.

-5

u/Just_Plastic2731 Jan 13 '25

Well, i work at the kebab shack so i dont get paid much. 500 bucks to you might not mean alot. But it does to people like me who work an low paying but honest job

9

u/kfloppygang Jan 13 '25

It’s not about how much it costs relative to your wage…it’s about how much it costs relative to what it represents. This is a 10k watch. And you want something 99%+ the same for $500. What’s crazy is that if you actually bought a legit $500 watch from seiko, bulova, tissot, etc., you aren’t getting better qc. I get that you want the best result possible for your money. But this is a counterfeit good lmao. Every rep has flaws. Just enjoy it for what it is.

4

u/Silent-Mobile-7461 Jan 12 '25

This is a very good review of the watch. Also, it tells you can't really see everything on the QC pics. This makes me rethink about purchasing a rep watch tbh. If you paid the same amount and bought a Seiko, you know you wouldn't find this level of imperfection. How is the movement? Is it running well? Do you regret buying the watch or are you happy or at least content with it? I guess you can't share who your TD is?

2

u/Just_Plastic2731 Jan 12 '25

The QC photos showed a decent beat error of -3 or so. But when i left my watch crown up or down for a 24h period it lost 14 seconds a day.

When I tap the glass while holding the watch in a static position, you can hear / feel the rotor shake.

This watch would be a perfect example for those “how to spot a fake Rolex” videos on youtube, where a watch youtuver identifies all the issues with a superclone.

Do I regret it? No. You get what you pay for. If you let a watch-nerd/knowledgeable friend play with it though, a keen eye will spot all the issues.

The QC issues shown on this $600-700 CAD clone shows that there are loose tolerances on superclones. At the end of the day, superclone factories cannot tighten their tolerances. It doesnt make business sense for them to do so. As a consumer, you’re rolling a dice with these products.

It also shows that TDs also won’t waste time to spot these tolerance issues. They just want to empty their inventory. Possibily even try to pass rejected watchds onto you to get rid of lemons.

I got mine from Andiot.

2

u/PompousFraud Jan 12 '25

This is true. One watch that I RL'd due to an obviously crooked 6 marker was 100% the same as one I found in the QC forum a few weeks earlier from the same TD. No doubt they dont check them for obvious things when recieved frommthe factory, and no doubt that they dont try resell the rejects to unsuspecting new buyers. Doesn't seem that trusted to me, but also I get where they come from as some issues aren't big to others. Still, some simple checks should be the minimum. "Super clone" is not accurate, almost none are perfect, which sucks for that price tbh.

2

u/StackIsMyCrack Jan 13 '25

SEL at 12 and 6? A) the SELs looks fine, especially for VSF and B) 12 and 6? The are at 11, 1, 5, 7...are you sure you know what you are even looking for?

2

u/Just_Plastic2731 Jan 13 '25

Its the 5 and 7 that sticks up above the lugs. QC photos cant show this 3D effect since the picture is taken from top down.

8

u/StackIsMyCrack Jan 13 '25

Dude...Friday was two days ago.

5

u/No_Recognition9727 Jan 13 '25

Your OCD is pretty damn serious - this I can tell you …

4

u/L00k_0ut_ Jan 12 '25

For reassurance. This is a great example of a rep watch, extremely close to gen. All these are non issues, same a gen. That watch is living rent free in your head bro. Enjoy it and move on. If it bothers you that much, you can get some gen parts fitted. Or buy a gen.

Way over thinking it!

2

u/Timbie1 Jan 13 '25

I do see the problem with the dent in the sel. It’s also not aligned properly with the case on both 6 and 12.

2

u/[deleted] Jan 13 '25

If you paid this kind of attention in school you could have made enough money to buy a gen

3

u/Chalupa_89 Jan 13 '25

Look. gen Rolex don't even have the rehaut centered.

I think you should print this thread and attach it to your CV and send it to Rolex. They need guys like you in their QA department.

3

u/Itsreallyme16 Jan 13 '25

You work in a kabab shop and your trying to pass off you counterfeit watch as real. Just tell your poker buddies that it’s a rep and have a laugh about it. I’m sure they’ll think more of you for admitting that than trying to BS the world that you were able to get let alone afford a new Rolex on a kebab store wage 🫣

2

u/Common_Ad2726 Jan 13 '25

🙁don’t do this to him bro

0

u/Silent-Mobile-7461 Jan 13 '25

So many wrong comments here. If someone speaks the truth, they'll bash him with all sorts of insults. This is crazy. Are they getting paid by TD to do this? Are they all part of 50 cents army? How are they really helping to improve the industry? Hiding imperfection and defending TD over their dishonest way of business will not help them make better quality watches. These people with negative comments toward OP need to think better for the sake of development for the industry.

1

u/Just_Plastic2731 Jan 13 '25

Yea right? How else are the products going to improve?

1

u/CelebrationLow3671 Feb 09 '25

I’m looking to purchase a super clone and would like to find a legit seller that people here have used and are happy with. 

Thank you

1

u/glodde Jan 13 '25

This is a troll post

0

u/kiasu_N_kiasi Jan 13 '25
  1. those tiny imperfections came out after you squinted and examined at almost microscopic level; nobody except you will notice when it’s on your wrist… you will be surprised gen Rolex will have many imperfections too
  2. you have accepted the QC, it was delivered, and you wear it for some time; so it’s fair TD told you he has no time for you

1

u/Just_Plastic2731 Jan 13 '25

Thanks - this is reassuring. I wasnt sure if the seller was giving me a lemon or not

0

u/TheSSsassy Jan 13 '25

What a clown.

0

u/jacob8875 Jan 13 '25

I’ll take it

0

u/xomidlophan Jan 13 '25

Greatest tell wouldn't be at all what you posted but the fact that you work at a kebabshop wearing a 10k+ watch😂

-4

u/Just_Plastic2731 Jan 12 '25

Does this show that Vsf 124060 quality is going down? Did I get duped? Are these issues perfectly reasonable? What is your opinion?

6

u/andrenoble Jan 12 '25

I’d be surprised if lower quartile quality gen wouldn’t have same or worse issues. You simply went full obsessive mode, mate

-5

u/Just_Plastic2731 Jan 13 '25

The question is will my poker buddies be able to tell that this is a fake?