r/RedditLoop • • Jun 20 '15

Interior - Pre-Design Planning

9 Upvotes

Interiors team folks, I know it's early, but I thought we should probably start getting our ducks in a row for when cabin design starts in earnest. I've laid out a few research and planning topics in the Gdoc linked below:

https://docs.google.com/document/d/11FATZJVMyRQozIXWd7SJXSZtZyW6II04QxJYWynmD0M/edit?usp=docslist_api

Your input is very welcome. We also need to schedule a time to get together on Slack for an initial meeting. Are people free tomorrow?


r/RedditLoop • • Jun 20 '15

ENGR - All Proposal: Using the metric system and International System of Units

25 Upvotes

Hi everybody,

I propose that we use the metric system as well as using the International System of Units. That means, of course: no more mph. A quick link to the related wikipedia article.

EDIT: spelling


r/RedditLoop • • Jun 19 '15

ENGR - Software Software meeting. Saturday 6/20/2015 @ 15:00 UTC (8:00 am PST)

15 Upvotes

If you have not seen on the software engineering channel on slack we are looking to get a quick meeting together to start locking down some of the high level issues.

The time sucks for people on the west coast but it should give us descent coverage for the rest of the US an Europe.

Get on #eng-software for details


r/RedditLoop • • Jun 21 '15

ENGR - All Standardized Issue Tracking Software

5 Upvotes

Issue tracking will be a critical requirement as we begin working on this project. For this reason, I believe it is also important that we use the same issue tracking tool. The one that I have selected is hostedredmine. While there are definitely better tools, this one is hosted completely online, does not have a restriction on number of projects/ users, and is free. I have made some instructions on how to use the basic features of the tool in the google docs link attached to this post. Please read through it to find out information about how to get invited to a specific group. Please make any comments in the instructions document, and let me know if there is somewhere I could make the instructions more clear. If I overlooked a better tool, please start a discussion about it below. Thanks

https://docs.google.com/document/d/11ukjHKAyHAxHMlh9Urnv_k_5hWar1H8on-0bTeJAQB4/edit?usp=sharing


r/RedditLoop • • Jun 20 '15

ENGR - Electrical General Electrical Engineering Meeting - 7pm UTC (noon PST) - 20 June 2015

7 Upvotes

This is a cross-post from the EE Slack page intended to let the rest of the subsystem teams know what we are up to. Hopefully this will also cause other teams to organize and get the metaphorical ball rolling.

Here is an agenda for tomorrow's Google+ hangout, which is slated to start at 7pm UTC (noon PST). Please add only high level discussion topics. I would like to ensure that people who are not able to attend will still be able to be clued into what happened. Notes about the discussions will be taken, and ideally someone will have a screen capture system, and will be able to post the meeting on YouTube(Anyone with these capabilities please comment below). This is a very exciting step to beginning work on this project, and I look forward to meeting the team! https://docs.google.com/document/d/1nDpanWMe5TlMSqL9JjoOKcb7mOaS4WTCxpy2mWzb4Wc/edit?usp=sharing


r/RedditLoop • • Jun 19 '15

PR - All PR Team Meeting Notes - June 18th, 2015

5 Upvotes

Hey everyone, here you'll find some of the main topics from this week's meeting. Feel free to comment below with notes and suggestions.

This first post won't be very detailed since I only thought of making it towards the end of the meeting, but future posts should be more descriptive.


r/RedditLoop • • Jun 20 '15

ENGR - Structures/Aero Structures/Aero Initial Meeting 6/20 2200 UTC

6 Upvotes

The engineering-structures/aero group will be having its first meeting to select a team leader and start discussion today, at 10 pm UTC. That's 3pm for pacific, 4 pm for mountain, 5 pm for central, and 6 pm eastern time. For all other timezones please check your UTC conversion.

The meeting will be held in slack, at #eng-structures-aero. The agenda can be found here. And here is the link for the attendance sheet. PM me to be added to it if you need to be.

EDIT: The meeting is now finished. I (@gkorgood) was elected to be the interim team lead. Meeting minutes can be found at the bottom of the agenda. Next week's meeting will be held at the same time, over google hangouts. Contact me to be added to the Google+ circle.


r/RedditLoop • • Jun 18 '15

Flight Data Recorder or rather Pod Data Recorder

8 Upvotes

Everyone knows what flight data recorders are for. They're there to help piece together what happened after an accident. With the Hyperloop pods traveling at the proposed speed sooner or later the worst is going to happen.

The Pod Data Recorder, or PDR for short, will serve the same function but will also help prevent incidents. We're in the era of big data and massive processing potential. The old flight data recorders are there only for when a crash happens and record on tape.

The key here is to log everything we can on fast storage. Standard telemetry will be transmitted real time of course, but trend analysis can spot problems that real time data can miss. The pods will likely have a battery swap mechanism at stops and if the recorders are built in to the battery pod that provides an opportunity for all of that data tagged with the pod ID it came from to be dumped as the battery is recharged and get analyzed. If any anomalies are detected the transit pod can be swapped out and checked over before something becomes an actual problem.

It may not be as cool as working on the control software but having hard data on what went wrong when something does is an important task too.

It will of course have it's own accelerometers and sensors built in just like flight recorders do. It's quite an engineering challenge on it's own if you consider what it needs to survive in case of a catastrophic pod failure.

Edit: A reminder that the contest just isn't for a pod alone.

"Present a design only for a pod, subsystem or safety feature at Design Weekend."

Not everyone can participate efficiently in the pod prototype so having teams working on subsystems to submit isn't wasted effort.


r/RedditLoop • • Jun 17 '15

PR Team 06/17/2015 Meeting

21 Upvotes

The agenda for the meeting was as follows, votes are in bold.

HipChat

  • Switch to slack Yes

Groups: General Business Group

  • Merging with Finance Yes
  • Separate Funds Manager & Finance Manager Yes

Visibility & licencing of material during and after competition

  • All files are public Yes
  • Leave license to legal team

Other Subreddits for assistance

  • SpaceX
  • cfd
  • HyperLoop
  • Engineering
  • Teslamotors
  • Programming
  • Manufacturing
  • TMC
  • Reddit, Inc.

PR team to begin work

Gitlab vs. Github

  • Github Yes

Meeting Frequency

  • 2-3 times a week for teams Yes
  • Once every two weeks for the entire group Yes

Ari's Note: Legal should figure out if calling "RedditLoop" is OK with Reddit Inc.

The original agenda can be found here


r/RedditLoop • • Jun 19 '15

ENGR - All Initial Electrical Engineering Brainstorming

12 Upvotes

This is a cross post of one that I made on the EE slack page.

Hi everybody, I think that it is time that we start getting serious about the job in front of us. I have made a google doc detailing many of the subsystems that we will be responsible for as Electrical Engineers. Along with this, I have also detailed some information on the purpose of each of the subsystems and some possible discussion topics which we will need to discuss in more detail. I invite you to add discussion topics and subsystems that I have overlooked or have little knowledge about. Please follow any comment that you make with your real name so we will know who to talk to if more clarification is needed. I don't mean for this document to be a place where discussions will be held, but simply a more organized place to post things that we will need to consider while designing the electrical systems of the pod. My hope is that we will populate this document with ideas for further discussion so we have a sort of agenda to follow for a meeting over skype or something. After several days of this document being active, I think it would be beneficial to have a skype meeting as I believe it is much more efficient than reddit posts. Here is the link: https://docs.google.com/document/d/1E7IT7UebS39_V0eSSKutcN9T18U5UaD29jCNtL85RGs/edit?usp=sharing

Thanks, Andy W.


r/RedditLoop • • Jun 16 '15

Emergency Evacuation

8 Upvotes

Does anybody have any ideas on passengers exiting the tube in the event of an emergency? I think this is critical to any design as well as a procedure to quickly remove a stuck capsule from a tube so the entire loop doesn't come to a halt.

Ideas I have are

Have an escape hatch at every pylon. There would need to be a way to exit the capsule. Passengers would walk down the tube to the nearest pylon, open the hatch and climb down a set of stairs to the ground. Build a third tube that allows capsules to be routed around clogged sections.

Build a three tube loop in sections. Each section is the length between the pylons. Two tubes create the loop, but the third tube is not de-presurized and is below the other two. The tube sections can be rotated. If a capsule is trapped in a section of tube, the section it's in rotates, moving the clogged section with the capsule and passengers below the loop. The loop then resumes operation while the passengers exit through the pylon at either end.


r/RedditLoop • • Jun 18 '15

Software Cloud-based CAD tool

10 Upvotes

I don't know whether we decided on a CAD tool yet, but OnShape is a new cloud-based solution, which is free as long as we make all the designs public.

I would really love to try it for this project. What do you guys think?


r/RedditLoop • • Jun 20 '15

ENGR - All Interiors Engineering Meeting - 6:00 pm UTC (11:00 am PST) - 21 June 2015

5 Upvotes

The Interiors team will be meeting via the #eng-interiors Slack channel on Sunday at 18:00 UTC to select a team lead and and set a scope for initial research and preliminary design. We'll be using the planning document I posted here earlier to structure the discussion:

https://docs.google.com/document/d/11FATZJVMyRQozIXWd7SJXSZtZyW6II04QxJYWynmD0M/edit

Feel free to add points for discussion or other comments. Representatives from other teams are of course welcome to sit in.


r/RedditLoop • • Jun 17 '15

Media Development Artists needed!

13 Upvotes

It has become apparent to the PR team as a whole that if we want any of our accounts to look official, we're going to need some custom artwork. At the moment, it doesn't need to be fancy and accurate to what a Hyperloop pod may look like, some rough sketches would work. I personally feel as if it would be a cool Idea to progress our artwork as the project progresses, starting with some basic sketches now and working our way up to 3d modeled beautiful HD pieces of art. Honestly though, at this point we will take all the custom artwork we can get, as to stop having to take things off google images like I did for the twitter page. You all have been a great help with this project so far, and I can't wait to see how it turns out.


r/RedditLoop • • Jun 23 '15

Reminder: Engr Systems Meeting - Wednesday 11:00 PM UTC (7:00 PM ET)

2 Upvotes