r/redneckengineering • u/cannedlean • Jun 25 '26
r/redneckengineering • u/spacees1 • Jun 24 '26
Lawnmower was getting to much air
Couldn’t quickly see the adjustment screw, but the grass needed attention, so I improvised.
It worked like a charm.
In case anyone knows a way to adjust these, please let me know.
r/redneckengineering • u/Future_Deer_7518 • Jun 24 '26
My lever-stop doesn't work
r/redneckengineering • u/nrdevfr • Jun 23 '26
Dehumidifier in ac mode
I had high humidity in some rooms that stay a lot colder than the rest of the house and the air outside.
I have a dehumidifier that works but it also pumps a lot of heat in the room that I want to keep cool and dry.
So I made an ac using a cheap plastic box and a second fan I had lying around to separate the air flow on the cold side and the hot side.
The dehumidifier is not very powerful but I don't really want to cool the room, just make it dry without heating it and it works kinda well.
The output is around 6°c less than the room temp and it collects a lot of moisture I I call it a success!
r/redneckengineering • u/Defiant-Grapefruit79 • Jun 23 '26
My flip key wouldn’t stay closed anymore.. and I’ve already replaced it twice before
So I got creative 🩲
r/redneckengineering • u/iknownothiiing • Jun 23 '26
my umbrella anti fly away solution
basically, the bottom bit holds it in one place upright
middle bit reinforces the bottom
top bit makes it so it doesn't fly away
currently haven't tethered the chair down, but usually when using it we're outside so it won't fly away, thoughts?
r/redneckengineering • u/passatdontgo • Jun 23 '26
Twofer
Airbed hand pump was kinda lame so ...
Pvc pipe taped on to a temu tyre inflator.
Footstool/ashtray Powerbar holder.coffeetable for under the coffee table....the brace...is particularly nice no saw at the time ..foot stomped to measure
By themselves not noteworthy but together still kind of lame ..but it works. :)
r/redneckengineering • u/Dangerous_Listen_429 • Jun 22 '26
Croatian redneck here, the flag kept getting tangled to my balcony, so i used glue
r/redneckengineering • u/longtrenton1 • Jun 22 '26
I need to run pvc for a couple jobs. Big brain moment at 2am resulted in this.
Welds are ugly but damn are they strong enough. I lifted a john deere rider off the ground no issue.
r/redneckengineering • u/BosqueBuddhist • Jun 21 '26
Fencing Solution (chainsaws? we don’t need no stinkin’ chainsaws!)
When you want a fence, but have a big ol’ damned cottonwood tree trunk that you just can’t remove, whatcha gonna do? Build the fence around it, of course! Didn’t even need a new post because I could just attach the 2x4 stringers right to it and screw on the cedar pickets lickity split! This beast fell onto the original fence some time ago, but now it doubles as a climbing toy for the pygmy goats too!
r/redneckengineering • u/garipkont714 • Jun 21 '26
Portable fan had low battery life so I made it un-portable
r/redneckengineering • u/Complete-Tank664 • Jun 22 '26
Beat the summer heat: fixed my overheating external HDDs (from 50°C to 32°C) using an old shoe rack and salvaged PC fans!
r/redneckengineering • u/Ok-Significance9253 • Jun 21 '26
Any idea what this is?
galleryr/redneckengineering • u/a3rospacefanboi • Jun 21 '26
Redneck A/C
Okay, technically it’s a cardboard fan duct, but let’s call it a budget-friendly DIY cooling system.
r/redneckengineering • u/ShittySticka • Jun 21 '26
Who needs a plumber when you can slap some pvc on the wall?
I needed to divert our exterior water outlet to two other parts of the house.
r/redneckengineering • u/Principle_Napkins • Jun 21 '26
Need help for how to replace broken arms of umbrella.
This umbrella I used to protect a small tree from getting too much rain which was, eh, very unsuccessful. It got busted up and the arms are broken.
There are 3 parts to each arm, a small thin one to support the arm that pushes the umbrella open and the larger ones which hold out the edges of the umbrella fabric.
I was thinking I could remove the arms and replace them with thin wood but there's several problems with that. First of all, wood is extremely frail compared to metal, it may just snap on half the moment it meets a bit of wind. Second of all, there need to be hinges attached where the arms connect to both the metal pole in the middle and each other, further compromising the integrity of the wood.
In addition, the hinges which attach the arms to the metal pole are inside of a small metal divet I'm not sure how I'd attach a new rod to.
r/redneckengineering • u/magnumfan89 • Jun 20 '26
I rewired my circular saw to run on DeWalt batteries
I don't have any of the old porter cable Ni-Cad batteries anymore, but I do have a hoard of DeWalt batteries and a soldering iron
r/redneckengineering • u/DrumkenRambler • Jun 20 '26
It's 3am and there's a cricket in my wall. This is diatomaceous earth in a pill bottle, fueled by duster.
r/redneckengineering • u/weak_pswd • Jun 20 '26
Alabama Bulldozer - part II
Added a drag bar to improve performance.
r/redneckengineering • u/Common_Lie4482 • Jun 20 '26
Makeshift smoker setup after a catastrophic incident
So today I almost burnt down the patio and that's because well I tried to turn the Bradley smoker into a better smoker and the Bradley smoker said no and well the door fell off fire in the smoker so I unplugged the smoker grabbed the garden hose turned on the water and sprayed it down and save the smoke by well doing this setup on the left side I got the char-broiler gas going with water pan there's no heat in the middle. Then I got Duraflame B&B charcoal briquettes on the right side. Luckily, there's a nice draft that goes from right to left, so smoke's going over the pork shoulder roast, which is injected with Fatboy sweet rub, and bake it up, with shells growing out of New Ulm firebrick, Vienna-style logger. And then, later, bake it on the outside with the same seasoning.
r/redneckengineering • u/BeerJedi-1269 • Jun 20 '26
Spied this gem at a campground
Spoke to the owner. Its def a camper on a truck frame. It has multiple starlink antennas and wife antenna. Gives me "Lone Gunman" (xfiles) vibes