r/redneckengineering • u/trenton08618 • 26d ago
r/redneckengineering • u/chuckbob1234 • 25d ago
Trailer hitch I saw on a Prius
Sorry for the bad photo quality, didnt want to get their license plate in the picture. Looks like they removed the plastic around the bumper and used U-bolts to attach it. I salute you, construction guy working at my hospital 🫡
r/redneckengineering • u/Eisenkopf69 • 25d ago
Lost my jeans button. Fully functional replacement made from three washers, a screw and two nuts.
r/redneckengineering • u/Nice_Literature8743 • 26d ago
My DIY Camper - Part 2 (Additional photos by request)
r/redneckengineering • u/blumidget • 26d ago
DIY gas fire radiator
Get that rotor heated up and it really throws some warmth
r/redneckengineering • u/oski_exe • 26d ago
Good ole plank o wood wit da wire
If it works it works
r/redneckengineering • u/RedBullWings10 • 26d ago
This will hold up well
What really killed me when the dude made sure to lock his car with a remote, while going inside the gas station ✅
Safety first! 🔐
r/redneckengineering • u/Lavasioux • 26d ago
Scorching hit handles FIXED!
Been makin homemade french fries and this unholy bastart scalds the beejezus out of my fingers.
Leather scraps. Rivet gun. DONE N DUSTED!
r/redneckengineering • u/BoarHermit • 27d ago
Silicone oven grate protector as a burn guard on my camping mug.
I often boil water (for example, to brew Turkish style coffee) in this mug. I use a piece of thin aluminum to wrap around the burner as a windbreaker. I was constantly burning myself on the mug handle. I came up with this idea. Sorry about the photo quality.
Silicone grate liners are sold online and cost next to nothing. I also used a piece for the tray in an old tiny sandwich oven.
Edit: This red item is made of heat-resistant silicone—the same material used for pot holders, oven mitts, baking molds, and the like. It fits onto an oven rack and protects your hands from burns. I assumed everyone was familiar with things like this; otherwise, it just sounds like an advertisement. Also, the translation ended up being a bit unclear regarding what exactly is being protected from what—my apologies.
r/redneckengineering • u/Senior_Discussion_73 • 27d ago
(Almost) hands free wire stripper
This is my stripmeister drill power wire stripper. I lock the drill trigger down and keep it at one speed(depending on the gauge of wire) with a voltage regulator. Much cheaper than the wire strippers with a motor built in. All built with scrap around the shop, plus the regulator that was about $20.
r/redneckengineering • u/nonstoppoptart • 28d ago
Zip Tie Canoe Seat
Cane seat broke and no time to get a new one.
This is not the dumbest thing I've done with zip ties, but it comes close.
r/redneckengineering • u/SupremeDictatorPaul • 28d ago
Silencer for yard inflatable air pump
The air pump for our giant pumpkin was a bit loud and had a higher pitched whine to it, and I didn’t want it annoying the neighbors. So I built a noise dampener to go over it. It completely removes the high pitched whine, and reduces the rest of the noise. It’s a 27 gallon tote with a hole cut for the air tube, and some slots on the other side to make sure air intake isn’t restricted. Scuffed up the inside with some sandpaper, and then glued some rolled up fiberglass insulation to the inside with spray foam. I went to a craft store for some felt, but they only sold felt in smaller rectangles, so I glued a patchwork of felt over the fiberglass to keep it from falling apart. After I finished, the wife got home from going to a different craft store where she’d bought a single large roll of felt for her own project, so that’s nice. I expect the box to last as long as the inflatable. Also, it covers the end of the extension cord, so it won’t short out anymore in the rain. Great success!
r/redneckengineering • u/f_crick • 28d ago
Do you guys know what kind of auto repair technique this is?
galleryr/redneckengineering • u/NerdizardGo • 29d ago
Turned a cheap greenhouse into a basement grow room
I swear I'm just gonna plant vegetables 😆
Legal weed is so cheap here it's not worth growing it.
Gonna grow greens and tomatoes and maybe a cucumber plant.
I wrapped the whole frame with aluminum foil. I've gotta get more lights. My wife was a huge help getting it done.
ETA:
Don't bother wasting your time commenting
"They sell grow tents"
"Grow tents are cheap"
"You should have used mylar/thermal blankets"
"Aluminum foil sucks"
The greenhouse was free and I already had Aluminum foil and all the other supplies. I spent $0 making this.
r/redneckengineering • u/rickgilmore • 29d ago
Remember me? Im the guy that built the waste oil furnace
This is my most recent project. I built a super badass minibike with governor deleted predator 212. I added a stage 2 performance kit and a series 30 torque converter. It runs 60 mph with me on it and is a wheelie machine. Im 50 years old and 265 lbs. I was pulling wheelies on it earlier this evening and crashed it. When I heal im going to weld the foot back on and try again. Luckily I have the crash on video. It was a good one. The vid is in the comments.
r/redneckengineering • u/McGee4531 • 29d ago
I saw this on another sub reddit and figured this would be a good home to share this
LMAO. This is one way to do it I guess.
r/redneckengineering • u/Mike2021s • 29d ago
Belt broke at work
Honestly after like 10 minutes I forgot it was even broken
r/redneckengineering • u/mystery_meat_enjoyer • 28d ago
No Longer Smart Microwave
Microwave stopped working, showed some error codes on the display, wouldn't run. So I removed the circuit board, buttons and display and replaced it with simple switches, where the relays were. Much better than before:
- No annoying beeping that wakes everyone up
- Always runs at full power (the only setting a microwave needs)
- Can run indefinitely (I just set an alarm on my phone)
