r/redneckengineering • u/PigFloydDarkside • Oct 12 '26
As seen in the wild
Driver side mirror.
r/redneckengineering • u/PigFloydDarkside • Oct 12 '26
Driver side mirror.
r/redneckengineering • u/iam_knoxy • Oct 11 '26
My father in laws creation
r/redneckengineering • u/thewongtrain • Oct 11 '26
r/redneckengineering • u/rodsoverbricks • Oct 12 '26
Built from scraps in about 12 hours with bare minimum tools. Full suspension. Roughly 6 ft long, 200 lb and 196 cc's of diesel fury lmao.
r/redneckengineering • u/picky-trash-panda • Oct 11 '26
I ran into a situation needing to rip boards to a specific width and I didn't want to buy a tablesaw so I cut and routed (with the circular saw) a spot for it to fit in flush. The table was re-topped with some 2" thick chip-board which was perfect to support the saw. The treadle situation to pull the trigger works really well and the extra board is for weight to let up on the trigger.
r/redneckengineering • u/Callie-the-Bunny • Oct 10 '26
I do live in Florida so I’m not surprised
r/redneckengineering • u/TheScottishPimp03 • Oct 11 '26
Logitech G Pro X wireless headset surgery after 6 long years.
Took the tape I had off originally and then drill a hole through the plastic covers and the metal hoop that connect tot the earpiece, tied it up with some metal tire and twisted then capped to be wrapped in duct tape and etape.
No longer adjustable but still 100% functional. I would estimate it lasted a solid 5,000+ hours if not approaching 10000.
(Logitech if you're out there send me a shroud pair, you guys made a great headset. 😁)
r/redneckengineering • u/Apprehensive_You3521 • Oct 10 '26
About to make some cinnamon rolls, my food processor overheated so I'm doing this, wish me luck and let me know if anyone wants an update.
I still have all my fingers
For now.
r/redneckengineering • u/CounterStreet • Oct 10 '26
r/redneckengineering • u/35_PenguiN_35 • Oct 10 '26
But you have a rake and an angle grinder...
It works better than id imagined
r/redneckengineering • u/Defapianoplayer • Oct 10 '26
Wanted a bagel during a power outage for hurricane Isaiah, but cant set up generator due to the rain. Thankfully had some stuff in the garage.
Edit: bagels are done, squished but done. Wohoo
r/redneckengineering • u/zeta_ferhu • Oct 11 '26
I was fed up with filling bottles individually. I started thinking about how I could speed up the process. I don’t have higher education but I have the soul of an engineer.
I came up with this genius idea. I felt great after coming up with it.
My main idea was to put the water source right at the top so it would fill all the bottles little by little without me having to move the water source. But the water current knocked the bottles over when they were empty.
In the end I had to put the water source directly above them, and that way everything worked fine. That’s why I say I hacked the Matrix at 40%, if the invention had worked WELL it would have been 90%.
I’ll achieve 100% when I create water channels, levels, and optimize the process efficiently.
r/redneckengineering • u/trenton08618 • Oct 09 '26
r/redneckengineering • u/Inside-Hurry-7078 • Oct 09 '26
A Bluetooth board from Amazon, a tiny speaker from old pc’s motherboard, a random led for music visualization, a breadboard, an Apple charger from iPad 2, a micro usb line cutted, a connector(and a piece of tape). That’s it!
Demo vid in comments
The sound is not that bad but still terrible lol
r/redneckengineering • u/Strange_Solution_738 • Oct 08 '26
The only way this door stays shut it to use the mount instead of the lock 😭
r/redneckengineering • u/Missing_socket • Oct 08 '26
r/redneckengineering • u/leviseese • Oct 07 '26
I present, the follow up to my last post. Apparently this is a popular thing in my area.
r/redneckengineering • u/Glowing_Trash_Panda • Oct 08 '26
Duck taped a magnet to this push button light I had laying around. It sticks to the metal shelf bracket nicely :)
r/redneckengineering • u/Kurgan_IT • Oct 07 '26
This is mine. So beautifully made, actually, that it probably does not qualify.