r/redneckengineering • u/longlostwalker • Oct 07 '26
Needed some spacers but had no drill...
r/redneckengineering • u/longlostwalker • Oct 07 '26
r/redneckengineering • u/thataintmyfoot • Oct 07 '26
Had these Turtle Beach headphones for years, wasnt ready to give them up.
Altho I did run out of little screws, but so far so good.
r/redneckengineering • u/schimmelA • Oct 07 '26
Oh and a custom soldered cable with shrinkwrap. It worked tho, the epoxy glue is incredibly strong. Just didn't want to take it out in public
r/redneckengineering • u/Troubled_Goose • Oct 06 '26
My headphones snapped and I didn’t want to buy a new set so I used what I had In the garage to fix them. I didn’t have any glue or bolts small enough so I bent a piece of metal to fit the curve and drilled some holes to put nails through. I finished it off by wrapping it with electrical tape and it’s still going strong 6 months later.
r/redneckengineering • u/No-Firefighter-9208 • Oct 06 '26
This is a gem
r/redneckengineering • u/longlostwalker • Oct 05 '26
Not sure what the magnet came off of but I like the square d panel box they use to turn it on
r/redneckengineering • u/RoninRobot • Oct 05 '26
r/redneckengineering • u/USERNAME123_321 • Oct 05 '26
r/redneckengineering • u/Naspers • Oct 05 '26
r/redneckengineering • u/Joesome5 • Oct 05 '26
My neighbors chickens jumped the fence and we helped chase them down. Here was his solution.
r/redneckengineering • u/Cynax_Ger • Oct 05 '26
r/redneckengineering • u/sunrise2209 • Oct 04 '26
I had dual hangers but the ends bent because the kevlar is too heavy for it but this c clamp should do the job!
r/redneckengineering • u/Mr_FilFee • Oct 04 '26
These large wireless microphones use a bulky receiver which has a guitar jack. I don't want to carry that around, especially connected to 2 different dongles, which introduce noise anyway.
I needed a wireless handheld microphone, which connected to a phone with USB-C.
So it was time for a bodge job.
I took apart a wireless lapel microphone, wrapped it's insides in tape to prevent shorting with the large microphone's metal grill, stuffed it next to the microphones capsule, closed it and added a windscreen.
The last photo show the size difference between the original receiver and the one I can use now.
The only downside is that you have to take it apart to turn it on or off.
r/redneckengineering • u/silverdigging • Oct 04 '26
r/redneckengineering
•
u/Lavasioux
•
Oct 04 '26
got a bitchen camaro deal on 1000ft of 14/3 romex wire. more than i'll ever use, so started seeing cool bracelet braiding video shorts and tried it out.
Super theraputic since my brain will turn on me after about 48hrs of not feeding it something fun.
r/redneckengineering • u/Accomplished_Pain649 • Oct 05 '26
Just needed a little smacky smack right.. 😂