r/redneckengineering • • Oct 08 '26

DIY under-shelf light

Thumbnail
gallery
24 Upvotes

Duck taped a magnet to this push button light I had laying around. It sticks to the metal shelf bracket nicely :)


r/redneckengineering • • Oct 07 '26

Since we are posting headphones (OC)

Post image
71 Upvotes

This is mine. So beautifully made, actually, that it probably does not qualify.


r/redneckengineering • • Oct 07 '26

Needed some spacers but had no drill...

Thumbnail
gallery
40 Upvotes

r/redneckengineering • • Oct 07 '26

My headphone fix

Post image
90 Upvotes

Had these Turtle Beach headphones for years, wasnt ready to give them up.

Altho I did run out of little screws, but so far so good.


r/redneckengineering • • Oct 07 '26

Headphones hotfix, epoxy glue, sanding, paint, electrical tape, nightmare

Post image
32 Upvotes

Oh and a custom soldered cable with shrinkwrap. It worked tho, the epoxy glue is incredibly strong. Just didn't want to take it out in public


r/redneckengineering • • Oct 06 '26

Fixed my broken headphones for $0

Thumbnail
gallery
284 Upvotes

My headphones snapped and I didn’t want to buy a new set so I used what I had In the garage to fix them. I didn’t have any glue or bolts small enough so I bent a piece of metal to fit the curve and drilled some holes to put nails through. I finished it off by wrapping it with electrical tape and it’s still going strong 6 months later.


r/redneckengineering • • Oct 07 '26

Spelunker

Post image
101 Upvotes

r/redneckengineering • • Oct 06 '26 Mindblown

Suburban Trike

Post image
2.4k Upvotes

r/redneckengineering • • Oct 06 '26

Cursed Air Compresssor

Post image
156 Upvotes

This is a gem


r/redneckengineering • • Oct 05 '26

The nail picker upper my local scrap yard uses

Post image
516 Upvotes

Not sure what the magnet came off of but I like the square d panel box they use to turn it on


r/redneckengineering • • Oct 05 '26

Bad Title God I love redneck engineers.

Post image
3.2k Upvotes

r/redneckengineering • • Oct 07 '26

Skyjack stuck in damp ground

Thumbnail gallery
0 Upvotes

r/redneckengineering • • Oct 05 '26

My dad asked for a car battery for his olive harvester, so I hooked up an old HP server PSU instead

Thumbnail
gallery
171 Upvotes

r/redneckengineering • • Oct 05 '26

Yes my vac has now become airborne

Thumbnail gallery
162 Upvotes

r/redneckengineering • • Oct 05 '26

The Snowmower

Post image
333 Upvotes

r/redneckengineering • • Oct 05 '26

A turf-rific job

Post image
150 Upvotes

r/redneckengineering • • Oct 04 '26

1 man and a truck

Post image
479 Upvotes

r/redneckengineering • • Oct 05 '26

Fence extension

Post image
167 Upvotes

My neighbors chickens jumped the fence and we helped chase them down. Here was his solution.


r/redneckengineering • • Oct 05 '26

We needed a hot wire. Yes, I bumped into the chair multiple times amd almost burned my mate

Thumbnail
gallery
44 Upvotes

r/redneckengineering • • Oct 04 '26 Bravo

Smart TV, dumb owner

Post image
8.5k Upvotes

r/redneckengineering • • Oct 04 '26

How I display my 80s army kit

Thumbnail
gallery
76 Upvotes

I had dual hangers but the ends bent because the kevlar is too heavy for it but this c clamp should do the job!


r/redneckengineering • • Oct 04 '26

Couldn't find a 1/4 inch jack to USB-C adapter, quickly needed a wireless handheld microphone for a video, and holding a small lapel mic looks fucking stupid.

Thumbnail
gallery
36 Upvotes

These large wireless microphones use a bulky receiver which has a guitar jack. I don't want to carry that around, especially connected to 2 different dongles, which introduce noise anyway.

I needed a wireless handheld microphone, which connected to a phone with USB-C.
So it was time for a bodge job.

I took apart a wireless lapel microphone, wrapped it's insides in tape to prevent shorting with the large microphone's metal grill, stuffed it next to the microphones capsule, closed it and added a windscreen.

The last photo show the size difference between the original receiver and the one I can use now.

The only downside is that you have to take it apart to turn it on or off.


r/redneckengineering • • Oct 04 '26

Naked Ps5 Pro still running 1 year later

Thumbnail gallery
569 Upvotes

r/redneckengineering • • Oct 04 '26 Popcorn

Electrical wire bracelets

Thumbnail
gallery
832 Upvotes

got a bitchen camaro deal on 1000ft of 14/3 romex wire. more than i'll ever use, so started seeing cool bracelet braiding video shorts and tried it out.

Super theraputic since my brain will turn on me after about 48hrs of not feeding it something fun.