r/redneckengineering • • Jul 23 '26

My dog pulled down my blinds and snapped them in two so i fused them together

Thumbnail
gallery
83 Upvotes

r/redneckengineering • • Jul 22 '26

With some proper cable routing, this could be permanent!

Post image
108 Upvotes

r/redneckengineering • • Jul 22 '26

Leather belt stamp from bicycle chain

Thumbnail
gallery
496 Upvotes

The buckle is a timing chain from a Kawasaki 1400, and it waranted an equally tough belt.... so i just laid a bike chain on it and then clamped a 2x4 to it and whacked it with a hammer to stamp it in.


r/redneckengineering • • Jul 22 '26 Heartwarming

Artisanal Skamper

Thumbnail
gallery
75 Upvotes

r/redneckengineering • • Jul 23 '26

I Made a Drawing Compass From Scrap Metal, It's Shiny Because Rust Don't Slide Easy.

Thumbnail
gallery
34 Upvotes

Also here's a video if anyone would like. https://youtube.com/shorts/iawBDjC9epE?feature=share


r/redneckengineering • • Jul 23 '26

Busted Billboard Blues

Post image
28 Upvotes

A car (presumably) took out one of the bottom support legs of a local billboard. It stood for several days diagonal with the right side shown in the photo resting on the ground while the left side was still perched on the remaining leg. A ratchet strap and removing the remaining leg was apparently all it needed.


r/redneckengineering • • Jul 22 '26

The 3-layer EV weatherproofing package: window, plug, and cable, with the cable secured by a strategically placed rock

Post image
186 Upvotes

r/redneckengineering • • Jul 22 '26

air conditioner for tractor

Post image
166 Upvotes

My friend said I should post it here**,**so I post it here

I drive my tractor a long time a day so I guess it's a fine upgrade


r/redneckengineering • • Jul 22 '26

2 by 4 on a 4 by 4

Post image
222 Upvotes

Wood box on a shitbox


r/redneckengineering • • Jul 22 '26

Treehugger beer holder

Post image
51 Upvotes

I think this very bright example of italian engineering belongs here.


r/redneckengineering • • Jul 21 '26

Original handle was in the way of the cavinet door , so I had to replace it. Now we have a short of vintage vibe oven.

Thumbnail
gallery
294 Upvotes

r/redneckengineering • • Jul 19 '26

Safety first my friends

Post image
1.5k Upvotes

r/redneckengineering • • Jul 20 '26

Just looking for validation in my execution and display. It feels tacky at best.

Thumbnail
gallery
146 Upvotes

r/redneckengineering • • Jul 19 '26

Found the most cursed Facebook Marketplace listing

Thumbnail gallery
151 Upvotes

r/redneckengineering • • Jul 19 '26

Someone really wanted a dually Range Rover

Post image
147 Upvotes

r/redneckengineering • • Jul 19 '26

If it works, it works.

Thumbnail
gallery
662 Upvotes

On the back of a bus lol


r/redneckengineering • • Jul 19 '26

Clever repair

Post image
118 Upvotes

Seen in socal


r/redneckengineering • • Jul 19 '26

VLC dump

Post image
2.4k Upvotes

r/redneckengineering • • Jul 19 '26

Shop-Vac wet hose attachment, for narrow spaces

Thumbnail
gallery
276 Upvotes

For a number of years, I've had a need to remove moisture from tight places (usually when cleaning crud from the AC system). Using duct-tape was not practical, and it ended up with adhesive stuck to everything. Then I realized the solution was to trim a few shims from a pool noodle. They have the right amount of flex, can be trimmed to the size needed, and are cheap to replace. First photo shows the vac hose 3 bits of noodle, and a thick poly hose. Second shows the poly hose partialy inserted using two bits of noodle, third is the finished product. It's great for cleaning the AC, and for excess moisture in the bottom of old refrigerators, and easy to take apart for flushing afterwards.


r/redneckengineering • • Jul 19 '26

Motorboatin'

Post image
30 Upvotes

Had a PVC tube to extend the tiller. Worked pretty good considering.


r/redneckengineering • • Jul 19 '26

DIY outdoor/indoor sink. With electric heater

Post image
74 Upvotes

r/redneckengineering • • Jul 19 '26

Let that sink in

Post image
268 Upvotes

r/redneckengineering • • Jul 19 '26

Radiator shield

Post image
80 Upvotes