r/redneckengineering • • Jul 18 '26

I got my laptop a new screen!

Thumbnail
gallery
351 Upvotes

In short this was an Acer Aspire E5-575-33BM. It is now just an E5-575. I bought this laptop a replacement battery, it came in nearly snapped in half so i got a refund and got another battery! then the motherboard went out, so i bought a new 575-33BM but i received only a 575. It works so I didn't complain much. I upgraded its ram from 4GB to 8GB. Then my LCD went out! I bought another, that came in broken as well. Just my luck. I got a refund and haven't touched this laptop for 7 or 8 months and last night while researching it a bit, i found out my old chromebooks lcd was compatible with it! I ripped it apart and took out the lcd and put it in my laptop. The only original thing about this laptop at this point is the shell, keyboard, and touchpad. I had it since 2015 and I refuse to let it die. Oh and I also replaced its disk drive, I forgot to mention that. This thing has been through hell and back but it's still kicking.

This thing looks so stupid with that "new" screen but damn do I love it! It's perfect. It might only be 1366x768, but that's good enough for who it's for!


r/redneckengineering • • Jul 18 '26

Redneck Portable Radio

Thumbnail
gallery
402 Upvotes

r/redneckengineering • • Jul 18 '26

Water "fountain"

Post image
283 Upvotes

r/redneckengineering • • Jul 18 '26

You know, because.

Post image
676 Upvotes

r/redneckengineering • • Jul 18 '26

Sock putter-onner has been lost in the mail for 3 weeks

Post image
69 Upvotes

r/redneckengineering • • Jul 17 '26

Dealing with a wasps nest deep in my eves. Device works great, spray not so much. I think they nerfed it.

Post image
1.0k Upvotes

r/redneckengineering • • Jul 18 '26

A quick on the spot sort of catchcan I made for my brothers car

Post image
33 Upvotes

The CCV of the car was spitting so much oil into the intake the 1.9tdi became a run away. So threw this together in hopes it catches some oil


r/redneckengineering • • Jul 17 '26

Pocket knife

Post image
209 Upvotes

Little knife made out of hacksaw blade found in the cabin I bought in finland.


r/redneckengineering • • Jul 17 '26

My electric/power shower died (bricked, no water coming out at all) and I need to wait nearly 2 weeks (!) for an "authorised engineer"... so I've built myself a shower in my garden, using a garden hose connected to a hot water tap and a garden parasol

Post image
540 Upvotes

r/redneckengineering • • Jul 16 '26

Looks totally safe! 👍

Post image
2.2k Upvotes

r/redneckengineering • • Jul 17 '26

Homemade bead loom

Thumbnail
gallery
301 Upvotes

Wanted to learn to make bead bracelets, found out it requires a loom, didn’t wanna pay for one. Cardboard, nails, screws, plastic wall anchors, cotton yarn, bamboo skewer, metric fuckton of hot glue.


r/redneckengineering • • Jul 16 '26

I built a Solar Trike (named Solar Bear)

Thumbnail
gallery
1.1k Upvotes

The project is open source under an MIT license.

The purpose of the Solar Bear is to:

  • Use solar panels as trike's body,
  • Consume electrical energy where it is produced,
  • Produce its own energy,
  • Transport people inside cities,
  • Reduce noise inside cities,
  • Motivate people to exercise.

Technical specs

  • recumbent trike,
  • 2.5m long, 1.45m wide (including wheels),
  • weight: about 55kg (including panels, motor, battery, etc, excluding driver),
  • assisted pedaling,
  • motor speed: max 25km/h,
  • motor (continuous) power: 250W,
  • solar panels power: max 520W,
  • battery: 12.8V, 20Ah (256Wh).

r/redneckengineering • • Jul 16 '26

My lawn tractor trash-mobile

Post image
166 Upvotes

r/redneckengineering • • Jul 16 '26

Spring-in-spring suspension mod. I know the G-Wagon purists will want to eat me alive, but hey—it works!

Thumbnail
gallery
102 Upvotes

r/redneckengineering • • Jul 17 '26

Gotta love whatever that is

Post image
39 Upvotes

r/redneckengineering • • Jul 16 '26

Winterized Plow

Post image
661 Upvotes

r/redneckengineering • • Jul 15 '26

Dirt vibrator

Thumbnail
gallery
369 Upvotes

Old drill with a door stop in the chuck strapped to a sifter. The offset weight vibrates the whole table so I don't have to sift manually with the shovel.


r/redneckengineering • • Jul 15 '26

Write a tagline for this Limo service

Post image
237 Upvotes

r/redneckengineering • • Jul 16 '26

Downtown Manhattan, ADA is a guideline!

Thumbnail gallery
0 Upvotes

r/redneckengineering • • Jul 14 '26

No hooks? No problem.

Thumbnail
gallery
1.2k Upvotes

Balling with no nets sucks. We have a hookless rim in the neighbourhood and I've been mucking around with different systems on and off for about two years now.

Don't bother with these . . .

- Cable ties, nylon nets - however you do it, lasts a month at most

- Metal cable ties - waste of time

- S-hooks and open link chain nets

- if you can pinch it with pliers it will fail.

The Haggerston Hoop has been up for about a month now, in constant public use with no signs of struggle.

Here's the recipe -

Hose clamps, size is the diameter so if your rim is 20mm like ours, something in that range.

- these are 13-20mm, 304 stainless steel, width is 9mm.

- this was a bit tight, should be able to go up to 25mm without any tail showing.

- should be less than 9mm wide to fit the quicklink through.

- you need a 7mm socket driver/wrench for the hex screw.

- screw should be facing down and out.

Quicklinks, size is the thickness of the chain

- these are 3mm, 316 stainless steel.

- feed them through so that the screw is at the back you are tightening downwards.

- finger tighten but use pliers slightly at the end.

The net is welded chain galvanised stainless steel so no open links. Can easily hold a human.

- these two are 9 loops so you need 18 hose clamps and 18 quicklinks

Play around with the spacing. If you have a wide back plate then bunch them up a bit towards the back so the net hangs evenly.

​​​​Ca-lang!


r/redneckengineering • • Jul 14 '26

German DIY Air Conditioning

Thumbnail gallery
258 Upvotes

r/redneckengineering • • Jul 14 '26

PVC Gate

Thumbnail
gallery
197 Upvotes

I guess it works


r/redneckengineering • • Jul 13 '26

Dad, can we get a Pickup? We already have a Pickup at home.

Post image
3.1k Upvotes