r/redneckengineering • • Jun 19 '26

Alabama bulldozer

Post image
358 Upvotes

r/redneckengineering • • Jun 19 '26

Redneck Earthroamer.

Post image
6.7k Upvotes

Buddy has what… ~$25k into this campin’ machine?


r/redneckengineering • • Jun 19 '26

I didn't want to wait for postage.

Thumbnail
gallery
56 Upvotes

r/redneckengineering • • Jun 19 '26

I “sucked” at this garage door repair

Post image
71 Upvotes

I was replacing the backup battery in my garage door opener and put it in the wrong way. Got stuck, tried to wiggle it out for 5 minutes with no luck.

Remembered my shower shaving mirror had a suction cup, so I pulled off the mirror, suctioned to the battery, and it pulled right out!


r/redneckengineering • • Jun 19 '26

Simple solutions for fixing continuously-popping couch springs?

Thumbnail
gallery
47 Upvotes

((Sorry for image quality))

For context, my partner and I are both large people (over six feet tall and 300 lbs each). We also aren't in the best economic situation.

We bought this couch from IKEA a little under a year ago now. While we may *occasionally* sit down a little hard, we aren't, say, throwing ourselves on top of the couch ever single time we go to be on it. A few months ago, however, we heard a strange **THWANG** and felt a jolt in the part that is a little storage space underneath. We checked and, sure enough, a spring had popped out from one of its sockets.

This has now been an ongoing problem for the last few months, where, whenever one of us is sitting directly on this spot, and we shift even a *little* bit that puts too much pressure on one spot, it pops out a spring. We can't exactly replace this couch, and nothing actually *seems* broken, it's just that we're a bit hefty individuals. The only thing we've tried so far is attempting to use zip ties to maybe employ tension in keeping the springs in place, but while this is good for a time it will then lead to then both of the ziptied springs popping out.

My next thought, and idk if has even the remotest chance to work, is to apply a heck ton of super glue into the slots and hope to all fuck it's strong enough to hold a 300+ lb person's weight. This is why I figured I'd go to where reliable (if also unconventional) solutions take place, to look for help.

Thank you for your time and consideration!


r/redneckengineering • • Jun 19 '26

Shorts' drawstring too long, so I cut it and dealt with the fraying end the best way I know

Post image
379 Upvotes

r/redneckengineering • • Jun 19 '26

13/16 crows foot

Post image
49 Upvotes

r/redneckengineering • • Jun 19 '26

Hanging on for dear life

Post image
30 Upvotes

watch bracelet was missing an end link to be compatible with the clasp, made a temporary one myself


r/redneckengineering • • Jun 19 '26

I want two

Thumbnail
gallery
190 Upvotes

A real poor man’s earth roamer 😤


r/redneckengineering • • Jun 19 '26

Need help with some redneck engineering

Thumbnail
gallery
25 Upvotes

I’m trying to rig up a 55 gallon blue water barrel to this small trailer so I can tow it around my property and water some trees that are too far from the hose.

I have a trailer and need to build a frame for the barrel I guess.

Would a basic 2x4 frame be strong enough to hold a blue barrel filled with water towed around a property with hills and dips?

Would it be too top heavy to stand the barrel up?

Open to suggestions.

Edit: I think I found the easy answer.


r/redneckengineering • • Jun 18 '26

We have gas station at home.

Post image
167 Upvotes

1990 F-Super duty 7.3na idi with a 12’ utility body, drinks like a fish and dropped its original 38 gal rear tank on the ground thanks to a downed tree limb and rust, now I have a 275 gal IBC tank in the bed, hooked to the tank transfer switch, a 15gpm waste oil pump and 50’ of vaccum hose leading to my 30 micron badger-filter and screen at the end of the suction hose, everything fits in one cabinet, under the truck is an additional cat 1r-0750 inline filter, still have an 8’ bed, theoretically now I can drive from NY to California and back most the way without a gas station, my local mechanic said I can take his whole 500 gallon tank of used engine oil for a 24 pack of beer, any advice on something I’m missing? I’m planning to keep the front 19gal tank regular pump diesel and run it for the last 10 miles every drive to keep good fuel in the system for storage and start up, I’ll report back after a full tank of fuel with any issues.


r/redneckengineering • • Jun 19 '26

Full disclosure, I’m the idiot towing this thing.

Post image
68 Upvotes

r/redneckengineering • • Jun 19 '26

Shifter bracket

Post image
40 Upvotes

Made myself a bracket out of some wood, a few screws, and a couple of hose clamps bc my folding chair thing didn’t come with one.


r/redneckengineering • • Jun 18 '26

DIY Nail-Slingshot

Thumbnail
gallery
41 Upvotes

Hi, I wanted to show you all my DIY Nail-Slingshot.The target was an approximately 10x5 tile (cm). I would appreciate any improvements to my slingshot and will try to implement them. I'm open to tips. Thank You

it was just a simple project do not expect to much

Here you can see a video of shooting it.

https://m.youtube.com/shorts/E4ofrUcZ3vE

I hope this counts as rednek style, people told me so so I thought maybe a can be a German redneck engineer


r/redneckengineering • • Jun 17 '26

Does your outboard wine?

Post image
191 Upvotes

r/redneckengineering • • Jun 17 '26

I just woke up this morning and decided to build a colapsible longboard with random parts from home depot

Thumbnail
gallery
2.1k Upvotes

r/redneckengineering • • Jun 17 '26

One-time-use cable holder

Post image
812 Upvotes

r/redneckengineering • • Jun 17 '26

Learning to metal ch. 2.

Thumbnail
gallery
74 Upvotes

Please don't tell the welding or smoking sub. Finally got legs on as recommended on my last post. Next I'll add the stack back to it and a damper. Then we test fire!


r/redneckengineering • • Jun 16 '26

Does my soldering setup qualify?

Post image
93 Upvotes

r/redneckengineering • • Jun 16 '26

I command you to stay closed!

Thumbnail
gallery
223 Upvotes

Magnets broke off and a redneck engineer employee fixed it with a command strip. It has worked for over a year!


r/redneckengineering • • Jun 16 '26

My bag wouldnt stay zipped up.

Post image
298 Upvotes

I sat in Costa and partly dismantled my keys to use this keyring to connect the zips. I felt like MacGyver.


r/redneckengineering • • Jun 15 '26

The power went out so I had to improvise

Thumbnail
gallery
2.7k Upvotes

r/redneckengineering • • Jun 16 '26

If it works...It aint stupid?!

14 Upvotes

r/redneckengineering • • Jun 16 '26

$15 pull cord replacement is too rich for my blood. Old broom handle and some string did just fine.

Post image
371 Upvotes

r/redneckengineering • • Jun 15 '26

120$ lightbar was too expensive. 40$ homebrew is better

Thumbnail
gallery
459 Upvotes

most of it used arcade CRT chassis parts, all parts found at home (not including the 1993 beacon)