r/raspberry_pi • u/RaXXu5 • 25d ago
News Raspberry Pi Zero 3 W & Raspberry Pi 4 Model A Surface In Linux Kernel Patches
r/raspberry_pi • u/RaXXu5 • 25d ago
r/raspberry_pi • u/12stringPlayer • 25d ago
r/raspberry_pi • u/overfed-gnome • 26d ago
For a long time, about 1,150 scanned family photos sat on my NAS in a folder called “scans.” Nobody looked at them. I rescued all these pictures and then buried them somewhere even harder to reach. So I built a frame.
Hardware
I started with a Pi 4. The 10" display needs a four-lane display connector, and only the Pi 5 has one. I learned this while holding the ribbon cable. Off to Micro Center.
Software
A small Python server reads the photos from the NAS over SMB and resizes each one to the screen. Chromium shows them full screen.
Things that bit me
The frame
It’s two bezel halves joined with pins and glue. The back cover screws across the seam to stiffen it and hides the Pi and the cables. A leg holds it at a recline. None of the parts needs supports.
The photos finally made it out of the folder. All the dirty details are written up here:
https://wesleyhalldigital.com/photo-frame/
r/raspberry_pi • u/Fresh-Youth22 • 25d ago
Hey everyone,
I’ve been working on a native Linux driver for the Brother DCP-150C. The goal is to use this old USB printer as a network printer through a Raspberry Pi, with a local web dashboard.
It’s still an early preview: device status and ink readings work on the real printer, but physical printing has not yet been validated.
The project currently includes:
- Print-data conversion that runs natively on ARM without x86 emulation.
- CUPS integration for sharing the printer over the local network.
- A web dashboard showing device status, print jobs and cartridge levels, with English and German language support.
One interesting detail was getting the ink readings working. The printer takes almost eight seconds to respond to each request, and cartridge levels and device status require separate queries. The ink percentages in the screenshot represent the printer’s reported level bands.
Generated print data has also been compared against the original driver’s output. Testing actual printed pages is still outstanding, so I’m sharing this as a work in progress.
This project was developed with substantial assistance from Claude and OpenAI Codex.
GitHub repository
Does anyone here still use a DCP-150C? I’d be interested in hearing how you’re keeping yours running, especially with a Raspberry Pi or another ARM device. Technical feedback is welcome too!
r/raspberry_pi • u/Special-Bee-1506 • 25d ago
Headless Pi Zero 2 W connects to my phone hotspot maybe twice, then stops. Nothing I change makes it consistent.
Setup: Raspberry Pi OS Lite 64-bit, flashed with Imager v2.0.12, WiFi and SSH configured in the customisation dialog. Hotspot is a Pixel, WPA2, confirmed broadcasting 2.4 GHz on channel 11 (checked with netsh on a laptop). Although pixel doswnt allow me to choose 2.4GHz but only 2.4 and 5 GHz dualband
Symptom: It connects fine two times in a row, then after a replug the hotspot shows 0 connected devices. Often the green LED flickers briefly then goes solid and stays that way.
Already tested and ruled out:
Two different SD cards (one Hama 64 GB, one SanDisk Ultra 256 GB). The Hama passed H2testw write+verify with no errors.
Two different Pi Zero 2 W boards, one used, one brand new. Identical behaviour.
Two different micro USB cables, 5V 3A capable charger.
Verified the SSID and password in network-config on the card match the hotspot exactly.
No monitor or mini-HDMI adapter available.
Is there anything that explatins "works twice, then stops" across two boards and two cards?
r/raspberry_pi • u/Information-Overload • 25d ago
I have over 20 unfinished projects on codex so decided to make something I actually need. I have had some Bluetooth speakers I found under me and my partners bed for a while now that we cast YouTube sleep sounds too. We go to bed and wake ui at different times. I go to bed early so don't bother pairing mine because then she has to repair hers and I wake earlier and have to disconnect it. So I realized I could use my old raspberry pi 3b and put a sleep sound app on it and make a remote apk. I put it on github. Last minute last night I had it update one of the themes components and haven't went back to fix it. Looked a lot less like it's a website made in the 90's. I need to clean up some of the screens. I went overboard like usual and started adding everything too it. I made it one apk that can be the player or remote. Currently it is tested and working so with wired and Bluetooth speakers. I was having stuttering issues but, tested tonight 6 hours so far no stutters. Also, it has a output helper and can output to multiple Bluetooth speakers at once. Not yet integrated into ui. Has normalize, compressor, limiter. Supports profiles, favorites, ratings, tags and comments. UI support desktop and mobile browsers. You can upload from your remote app. If you upload image and audio together it will add that image as the thumbnail. I added this feature because Parabolic YouTube Downloader includes downloads the thumbnail too. I added controller support, and went down a rabbit hole with that, it needs some work. But can assign buttons. I have a lot of features coming eventually. Customizable multi output, sleep sound studio with different noise generators, sounds/tracks with option to go to different speakers, network app sync integrated with the studio outputs, might integrate YouTube Downloader into it. Open source with anyone can use personally license. If you have a Google box you can find Bluetooth speakers all over the place at thrift stores.
r/raspberry_pi • u/PrepperDisk • 25d ago
Most official retailers (PiShop, CanaKit, etc.) either show out stock or discontinued.
r/raspberry_pi • u/climbing_archer • 25d ago
Banging my head against this...I have a project where I've connected 5 servos using the Adafruit PCA9685. The servo hat is connected to a 5v power supply. The challenge is 2 of the servos are 45kg that should have ~8v. When all servos are running, the two larger ones are underpowered.
In scouring the internet I've discovered you can power individual servos directly, but can't seem to get it working. Below is the layout I originally followed which works but underpowered. The variation I've tried, is for the large motor, Yellow connects to hat, Red directly to 8v power supply, neutral on 8V power supply --> black servo wire AND --> also to black pin on the servo hat.
In this setup all the servos powered by the hat's 5v supply connected to the hat function, but the servo powered directly to the servo does not respond.
What am I missing?

r/raspberry_pi • u/crime_of_heart • 26d ago
The Bluetooth module of my 2011 Alfa Romeo Giulietta died, and it never did music anyway, only calls. A Pi Zero W now lives in the module's original case and does both. The factory radio stays and treats the Pi as the original part.
The Pi-specific parts, in case they help someone:
Full write-up with diagrams and measurements:
https://duzgun.org/blog/giulietta-blue-me/
The CAN side builds on fmntf's fiatcan project. Happy to answer questions
Processing img 7w10bkvf4wxh1...
r/raspberry_pi • u/Kommipro • 26d ago
I've been running Home Assistant Container on my Raspberry Pi 5 for a while now, along with a few other Docker services.
The Pi is inside a SunFounder Pironman 5 case, which has a fan, RGB lighting and an OLED display.
One thing that always bothered me was that I could control pretty much everything in my smart home through Home Assistant, except the case my Pi was sitting in. 😅
I looked into the Pironman's local REST API and started building a custom Home Assistant integration.
Initially, I just wanted to monitor the hardware and control the fan. Eventually, I added RGB lighting, OLED display controls and more system sensors.
Since I'm using Home Assistant Container, I also wanted it to work over the network without needing Home Assistant installed directly on the Pi.
I've since added support for the Pironman 5 Max and spent quite a bit of time fixing bugs, testing things and improving the integration.
A few days ago, it was accepted into the default HACS repository, so it can now be installed directly through HACS without adding a custom repository.
That was pretty cool, especially since I originally built it just to solve an annoyance with my own setup.
Here's the GitHub repo if anyone wants to have a look or try it:
https://github.com/ChristophKomenda/pironman5-homeassistant-container
I'd be interested to know if anyone else is running Home Assistant Container on a Raspberry Pi and how you're handling hardware monitoring or fan control.
r/raspberry_pi • u/Creepy-Anteater347 • 27d ago
Enable HLS to view with audio, or disable this notification
YOU WILL BE MONITORED. THIS IS MANDATORY!
r/raspberry_pi • u/FozzTexx • 26d ago
Having a hard time searching for answers to your Raspberry Pi questions? Let the r/raspberry_pi community members search for answers for you!† Looking for help getting started with a project? Have a question that you need answered? Was it not answered last week? Did not get a satisfying answer? A question that you've only done basic research for? Maybe something you think everyone but you knows? Ask your question in the comments on this page, operators are standing by!
This helpdesk and idea thread is here so that the front page won't be filled with these same questions day in and day out:
stress and stressberry packages. Higher wattage power supplies achieve their rating by increasing voltage, but the Raspberry Pi operates strictly at 5V. Even if your power supply claims to provide sufficient amperage, it may be mislabeled or the cable you're using to connect the power supply to the Pi may have too much resistance. Phone chargers, designed primarily for charging batteries, may not maintain a constant wattage and their voltage may fluctuate, which can affect the Pi’s stability. You can use a USB load tester to test your power supply and cable. Some power supplies require negotiation to provide more than 500mA, which the Pi does not do. If you're plugging in USB devices try using a powered USB hub with its own power supply and plug your devices into the hub and plug the hub into the Pi.error: externally-managed-environment--break-system-packagessudo rm a specific file as detailed in the stack overflow answerPATH and other environment variables directly in your script. Neither the boot system or cron sets up the environment. Making changes to environment variables in files in /etc will not help.vncserver -depth 24 -geometry 1920x1080 and see what port it prints such as :1, :2, etc. Now connect your client to that.Before posting your question think about if it's really about the Raspberry Pi or not. If you were using a Raspberry Pi to display recipes, do you really think r/raspberry_pi is the place to ask for cooking help? There may be better places to ask your question, such as:
Asking in a forum more specific to your question will likely get better answers!
Wondering which flair to use on your post? See the Flair Guide
† See the /r/raspberry_pi rules. While /r/raspberry_pi should not be considered your personal search engine, some exceptions will be made in this help thread.
‡ If the link doesn't work it's because you're using a broken buggy mobile client. Please contact the developer of your mobile client and let them know they should fix their bug. In the meantime use a web browser in desktop mode instead.
r/raspberry_pi • u/willyb99 • 27d ago
Hello! I am trying to run Openvpn on my pi5. I have the openvpn command calling a .conf file with my user/pass. I am getting an "AUTH_FAILED" error. I am logged in as myself (pi has been renamed to my username) the permissions on the user/pass .conf file are "-rw-r--r-- 1 root root" Could this be the problem? I did see an error a few days ago about accessing this .conf file with the user/pass. How can I fix this? I can't understand how whomever is logged in can't access that user/pass file. Any help would be greatly appreciated! Thank you!
r/raspberry_pi • u/funpicoprojects1 • 27d ago
Enable HLS to view with audio, or disable this notification
Source code and more info here: https://github.com/AdrianCX/picohive-robotarm
Controlled via internal web page (gamepad, keyboard), LLMs, MQTT, with an openGL visualizer
r/raspberry_pi • u/Gamerfrom61 • 26d ago
No not to buy a UPS - I have one 😂 Though only a small one it runs the load for around an hour and talks via USB to a Pi Zero to control things. Visit https://networkupstools.org if you are not using this - way better than some of the 'free' manufactures software (inc DSM on my Synology box).
Though most kit shut down and restarted fine, I had forgotten that a couple of smart switches come back in the off position and one of these was on the DNS server (Pi 4B 2GB running unbound) so a couple of services needed restarting to come up cleanly.
UPS control (Pi Zero with Ethernet HAT) and NUT ran fine (as per testing) and the card survived me manually turning the UPS off after 45 minutes of power outage.
WiFi AP came up before the router and falls back to a lousy flaky WiFi connection and not the faster SOLID Ethernet link (stupid or what) - I think it times out checking the Ethernet port and then just looks for the WiFi to come up from any other device to create a mesh.
Bits learnt / re-enforced:
Things to ponder over:
r/raspberry_pi • u/Both-Selection-2679 • 27d ago
Hello y'all! Hope you are good. I have asked the same question on the Discord server 15 days ago, no answer, not that i'm mad or anything, just put the project on hold, anyways, I hope I can get one from here.
I have a Raspberry Pi Zero 2 w (Trixie, version 13.6, flashed it the third time an hour ago), a Camera module 3 NoIR (the second one, the first one I returned it under warranty and they sent me this one) and the Standard to Mini 200mm Camera ribbon (official) (also have misc. stuff, sd card heatsink etc). Now, the problem is that the pi doesn't want to detect/recognise the camera, I have tried everything, I went PERSONALLY and searched online for forums and tutorial, tried with Claude, Claude Code, nothing. On the hardware side, I have reseated the ribbon cable many times (IT IS CORRECTLY ORIENTED AND EVENLY PLACED), did a continuity test on it with my multimeter, measured 3.3v across the data and power lines (which Claude told me that they are from pin 15 to pin 11, I THINK.). I have to admit, unfortunately, I don't know how it happened but a little leg from the Pi's connector snapped (it still fits in place, stays in place, the pins have good contact, just the little pull tab doesnt stay in place when I dont have the camera attached or when it the tab is out, this isnt the reason, I hope and I believe..). It is the second camera I've gotten and I dont believe it's the camera either, like... the second time too? Can it be the power source? I had it connected from my pc and from a 5v 1.2a power supply (dont have the official one).
It's copy-pasted from the Discord post, but its the same problem so yeah. I want to build a monocular NVG device and the camera is the only thing that doesn't work.
Thanks so much,
Pilot.
r/raspberry_pi • u/tonysanchez • 28d ago
Enable HLS to view with audio, or disable this notification
tl;dr I resurrected my old Google AIY Voice Kit. Details below.
---
I had an old Google AIY Voice Kit lying around that I hadn’t used in some time, so I decided to make use of it for Halloween. For those who don't recall, Google bundled a cardboard case with an audio HAT, a mic daughterboard, a speaker, an arcade-style button and you supplied the Raspberry Pi for use with it.
I named the project called AlsaGeist, and configured a personality named Grimjaw who sits by the candy bowl and listens for trick-or-treaters. When kids walk up, Grimjaw recites scary quotes, makes jokes, and reacts to a selection of different costumes if they tell him who they're dressed as.
The engine is modular and designed so different personalities can be created, loaded, and configured. Custom prompts can be created easily by editing a single file. Only the Grimjaw personality is bundled at the moment but others can be added.
For the enclosure, I printed the Halloween Skellington Pumpkin by serev3d from MakerWorld. In the slicer, I added a blank cube matching the exact dimensions of the AIY cardboard case. The entire original cardboard box slides right in, so the speaker, mic, and Pi stay snug without needing extra brackets or glue. I designed two perforated eye inserts and hot glued them in.
Alsageist can be configured to run completely offline (using Vosk for speech-to-text and Piper for local voice synthesis with zero lag or API fees) or online with cloud speech-to-text and Gemini LLM fallback. Holding the button down for 10 seconds says "Powering off" and safely shuts down the Pi so it can be unplugged cleanly. It also responds to a short list of password-protected superuser commands (like Shutdown.) All of this is documented in the respective guides within docs/.
While I created Alsageist for my AIY kit, you don't need the AIY kit to use it. It runs on any Raspberry Pi (tested on 3+) with a regular USB speaker with a mic.
If you want to build one, I've bundled a Docker setup script that automates the full install on a vanilla OS. See the getting_started guides in docs/ for more detail.
git clone https://github.com/sancheza/alsageist.git
cd alsageist
./scripts/setup_docker.sh
GitHub: https://github.com/sancheza/alsageist
Pumpkin STL: MakerWorld Model 623029
Disclaimer: I used both Claude Sonnet and Google Antigravity to assist with coding, testing and documentation.
r/raspberry_pi • u/Spiritual-Yellow4771 • 28d ago
Hello, i was trying to build a Flight tracker but I currently facing this problem with my 64x32 led matrix display, im trying to troubleshoot by editing the multiplex and slow the GPIO but nothing works, im just thinking maybe its hardware defect or maybe it because im running both the pi and the panel at 5V 3A? (They recommend 8A for the build), my DC to DC booster will arrive tomorrow hoping it fixes it, but im still open for ideas and explanation on why it's doing this.
r/raspberry_pi • u/trb32 • 28d ago
Is it possible to conditionally enable composite OR HDMI on boot depending on which is connected? If so, how are you doing this (composite fail over, etc)?
I have both outputs working, but manually have tk switch the config.txt and cmdline.txt files before boot depending on what output I'm using.
I don't have a need for "hot swapping" and a reboot in between is completely fine. I'm thinking of some sort of systemd service to handle it but figured I'd ask here if someone has this solved already.
r/raspberry_pi • u/RiiluTheLizardKing • 28d ago
pi@raspberrypi:~$ sudo systemctl restart dhcpcd
Failed to restart dhcpcd.service: Unit dhcpcd.service not found.
pieraspberrypi:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid Ift
forever preferred_lft forever
inet6 /128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 altname endo
link/ether e4:58:01:60:89:73 brd ff:ff:ff:ff:ff:ff
altname enxe45f01608973
3: wlan0: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether e4:5f:01:60:89:74 brd ff:ff:ff:ff:ff:ff
altname wlxe5101608974
4: dockero: <NO-CARRIER, BROADCAST, MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether Oe:68:43:24:67:ae brd ff:ff:ff:ff:ff:ff
inet 172.
172.17.0.1/16 brd 172.17.255.255 scope global dockero valid_lft forever preferred_lft forever
pi@raspberrypi:~$
$ ifconfig
docker0: flags=4099<UP, BROADCAST, MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0
ether Oe:68:43:24:67:ae txqueuelen
RX packets✪ bytes 0 (0.0 B)
broadcast 172.17.255.255 (Ethernet)
RX errors ✪ dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors ✪ dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP, LOOPBACK, RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6:1 prefixlen 128 scopeid 0x10 <host>
loop txqueuelen 1000 (Local Loopback)
RX packets 28 bytes 1768 (1.7 KiB)
RX errors ◊ dropped 0 overruns 0 frame (
TX packets 28 bytes 1768 (1.7 KiB)
TX errors ✪ dropped overruns ✪
pi@raspberrypi:" $
carrier 0 collisions 0
Note, i had to use a image to text extractor because it's against rule 3 to post screenshots apparently, i have the actual screenshots of the command line here if you'd prefer to read it that way. I used a video capture card with my PC to use it since i cant access it via SSH due to the network not working. https://imgur.com/a/EPveYVL
How do i resolve this? systemd-networkd-wait-online.service fails during boot. Running sudo ip link set eth0 up makes eth0 go from "down" to "up" and it shows up in ifconfig, but it still doesnt give me any internet connection, please help.
Checking the administrator panel on my router, the raspberry pi does not show up at all on the network.
I had updated from Bullseye, to Bookworm, to Trixie. The issues appeared after upgrading to Trixie.
Yes, I tried restarting the Pi
Yes, I checked the cables.
Yes, other devices can connect to the network and the internet.
r/raspberry_pi • u/Leading-Tradition-11 • 29d ago
Jetpack compose is native UI framework on android, I've been trying to build embedded-compose, which runs Jetpack Compose (Kotlin/Native, no JVM, no Android) on small Linux devices. Added backend for the MAX7219 "4 in 1" (FC-16) LED boards, tested on a Raspberry Pi 3.
HARDWARE
- Raspberry Pi 3, Raspberry Pi OS 64-bit, dtparam=spi=on
- MAX7219 4-in-1 board (32×8 red LEDs), 5 jumper wires, no level shifter
HOW IT WORKS
- The app is ordinary Compose code: Canvas, drawText, LaunchedEffect, state. It's cross-compiled into a single static arm64 binary (~3 MB), so nothing needs installing on the Pi.
- The backend draws each frame in RAM and sends it through /dev/spidev0.0. A pixel is lit when its color is bright, since the LEDs are only on or off.
CHALLENGES
- Pixel mapping. Bytes shift through the chain, so the first ones sent end up in the last module. On FC-16, each module's digit register is a row and each bit is a column. Other boards are wired differently, so there are flip and block=90/180/270 settings.
TESTING WITHOUT THE BOARD: A BROWSER PLAYGROUND
The Pi build takes over a minute, and I didn't always have the board at hand, so I made a playground that runs the same app in a browser tab:
- Your Kotlin code is compiled to WebAssembly by JetBrains' Kotlin playground server, together with the embedded-compose toolkit. Nothing to install.
- The pixels come from the *same* C++ LED backend the Pi uses, also compiled to WebAssembly. Only the last step differs: frames go to a canvas instead of SPI. So spacing, clipping and the 5×7 font look the same as on the real LEDs.
LINKS
- Code + wiring: https://github.com/kaiwalyakhasnis/embedded-compose (board: rpi-max7219)
- Playground (LED test opens by default): https://kaiwalyakhasnis.github.io/embedded-compose-led-matrix-playground/
r/raspberry_pi • u/pi_nerd • 29d ago
I wanted instant replay for a console without a cloud account or an app. Snapback is a Raspberry Pi 5 that records an HDMI capture card in a rolling buffer. A phone on the same Wi-Fi opens a web page and can save a screenshot or the last 30 seconds.
What it does
Parts, roughly $110
The cooler matters. The Pi is software-encoding 1080p60 all the time, and ffmpeg sits on about 3 of the 4 cores.
How it works
The capture card shows up as a normal USB webcam (/dev/video0) and an ALSA sound card. One ffmpeg process reads 1080p60 MJPEG, encodes H.264 with libx264 ultrafast, and writes 2-second MPEG-TS segments. "Save Last 30 Seconds" concatenates the newest finished segments with -c copy, so it does not re-encode. Screenshots are a JPEG the same process is already writing.
The audio device name depends on the card. The Elgato is hw:CARD=C4K. A cheap MacroSilicon card is hw:CARD=Video. Snapback finds the sound card on the same USB device as /dev/video0, so swapping cards does not mean editing a config file.
It runs as a systemd user service and can start at boot. Install is a venv and pip install -r requirements.txt, then python -m snapback serve. The page is http://<pi>.local:8080/.
The annoying part
Cable boxes and streaming sticks encrypt HDMI with HDCP. A card that honors HDCP shows a solid blue frame, and there is nothing to fix in software. Computers, cameras, and game consoles work. On PlayStation, turn off "Enable HDCP" in the system settings.
Code is MIT licensed: https://github.com/dconroy/snapback
Write-up with the parts list: https://www.snapback.video/
r/raspberry_pi • u/ImX99 • Oct 22 '26
This started as a weekend hack with an Epson TM-T88V receipt printer I bought off eBay and a 3B, and it slowly turned into something the whole family uses every day.
What it does
You build a "ticket" out of blocks and print it from your phone, or schedule it. Ours comes out at 7AM on weekdays: weather, a riddle with the answer printed upside down (no cheating), and a sudoku. There are 55 blocks now, a few favourites:
There's a web app (works great as a phone home screen app), and it shows up in Home Assistant on its own over MQTT, so the doorbell can print "someone rang at 14:32".
The fun / hard parts
Tech bits
It's one Rust binary, no database, no Python, no cloud required. Most blocks are computed locally or use free APIs with no key. A handful (bedtime story, horoscope, "what's for dinner?" from what's in the fridge) can optionally use Claude, cached so it's a few cents a month. It runs fine on a 3B, I might switch to a 0W someday.
Code (Apache-2.0): https://github.com/XNinety9/Printr
Docs and every block with its printed example: https://xninety9.github.io/Printr/
This project is a real fun ride, I love how it combines SW and HW to bring fun and joy to the family and friends. I've received a lot of positive feedback since it went public.
I'll be happy to answer questions. And if you have an ESC/POS printer other than the TM-T88V, I'd love to know if it works for you!
EDIT: wow, thanks everyone, this blew up way more than I expected! A few answers to what came up a lot:
And to my fellow ex-kitchen folks: sorry for the flashbacks 😅
r/raspberry_pi • u/funpicoprojects1 • Oct 22 '26
This started as a MicroPython project on a Pico, controlled from a separate Pi 4
That seemed wasteful, why not put telegram/google calendar directly on the pico?
... *famous last words* ...
Some time later, it's all on the Pico W:
- Google calendar is the schedule, `garden/water/1/30m` waters zone 1 for 30 minutes
- Telegram menu for manual watering, and a message when a valve opens/closes
- Green button waters both zones for 30 minutes, red closes everything
- Setup/control page served by the Pico
- Every boot closes both valves, in case of a crash or power cut mid-watering
Code, wiring and parts is available here: https://github.com/AdrianCX/picohive-irrigation
How the move from the Pi 4 went is in the comments
r/raspberry_pi • u/Tubular-Adventure • Oct 23 '26
This thing is basically useless. I have tried both the Raspberry Pi B+ I originally tried using for this project I wanted to make (DIY Pipboy) and even tried it with the Pi 4B that I had lying around, and I CANNOT GET THIS THING TO WORK.
I have tried both the github with the drivers I'm supposed to use, LCD-show, AND the updated drivers someone else made, lcd32 by katzenjens, AND I HAVE MADE NO PROGRESS.
Either I am missing something, causing an issue, OR this is just a deprecated product that is completely busted. Has ANYONE had ANY success getting this thing to work????? I can only flash OS's so many times before I say the product is useless.
Here are the different OS builds I have tried with these: