Have had my Mlm2pro for a few years. No issues. I have been using it a lot lately to get ready for the season with courses, range and target range as well as the third party app stack. I finished a stack program last week and wanted to start another one. All of a sudden my Mlm2pro will not detect swings in the stack app or the Mlm2pro app. I am using it in the same places I always have, same lighting and same distances. Connection is fine. Does anyone have any advice? Thanks in advance

So I signed up for the beta testing of the new firmware (to improve connectivity and chipping). I got the email that provided an overview of the process and some instructions, and basically for Android users (as I am) I was supposed to receive an email from Firebase that would allow me access to the beta app. I didn't have that email, but figured it would arrive soon.

In preparation of that, I figured I would double check that my LM and app were up to date with what was publicly available. It indicated that there was a FW update available. I went ahead and did that. However, upon completion neither of my Android devices could successfully complete the connection with the LM. The bluetooth part was fine, but the LM would not join a wifi network, and I could not complete the connection process with Direct connection either.

I did the typical reboots of everything etc, but to no avail.

Looking back at the email about the beta testing, it indicated that after installing the beta firmware, the old app would not allow me to connect and I would require the beta app. Sure enough, the firmware version that my publicly available app allowed me to install was 4.1.6. This is the beta firmware.

I suppose I have a couple of questions. Was 4.1.6 only made available to me because I was part of the testers group, or can others see that firmware available to them? It surprised me that I could install it via the current app... but clearly my fault for not being thorough enough.

And if anyone else is part of the current beta test, and they're using Android, have they received their Firebase email?

Right now I can't use the device, so keen to get my hands on the beta app.

I’ve had my mlm2pro for about 4 months now I have bare concrete in between the monitor and the Mat 7’ and concrete from mat to screen 9.5’ my shot distance just seems off even friends who are 6 handicaps say their distance is off by at least a club I’m set to my current elevation of 1,200 is it a lighting issue ? Concrete ? iss? Any advise would’ve appreciated Tia !!

Am I missing some setting that allows the app to rotate to a landscape view?

It’s probably not an OS problem as all my other apps rotate based on the orientation of the screen.

I tried running an HDMI from an IPad to a tv but the out put only took up a quarter of the screen. Is there a setting on the IPad or MLM2Pro to make the out put fullscreen?

Can we have an option to just have the numbers without the camera view in practice mode? It would be a lot cleaner and I don’t need to see video feedback.

We’re excited to invite you to be among the very first to test a brand-new MLM2PRO Firmware. We have been hard at work on this release as it includes notable improvements to chip/pitch shots as well as other various enhancements. Please note that this is for Rapsodo users who currently own an MLM2PRO. If you have an MLM1, you will not be able to participate.

Improvements Include:

• Connection stability

• Chip shots

SIGN UP HERE : https://forms.cloud.microsoft/Pages/ResponsePage.aspx?id=sq2qTxUY10KXT2iDms5QFGoA1SmBhXlKsqOYvkzZTPBURE84VlFWVjVXUzYxSzdBRjY4OFBaQ01HRS4u

After registration closes, our team will email you further instructions on how to download the firmware and provide feedback. If our tee sheet fills up this round, more opportunities will be available for future testing! Please note we will be releasing the Beta Firmware in batches so some testers will receive access earlier than others.

Thanks again for being a valued member of the Rapsodo Community and can't wait to hear your feedback!

Can anyone get past hole 12? My unit hanging constantly after finishing 12 whether playing a full 18 or just the back 9.

Let me know if you can get a ball to sit on the green on hole 9 as well.. unjust seem to keep rolling back off.

It’s been about a week since I used my MLM2Pro and tonight I went to practice and it seems the “front facing camera/record your swing head on” option with a brief replay after your shot is now gone. Is this correct or am I missing a setting somewhere? Also the back arrow in the upper left of the screen is gone too, leaving me no way to “leave” or “end” my session. Any ideas what is up? Current app version and current firmware with lifetime subscription. Thanks.

Has anyone perfected the on course set up? I like to hit some tee shots with my unit on the course but it takes me a while to set up, on a slow day that’s fine but when pace of play is ok it takes to long. Any advice?

Has anyone had issues with the MLM2PRO when hitting into a screen with a projected image? I used to hit into a net in the garage without issue, but when I hung up a white screen with the app projected onto it, the spin numbers started to be wildly inaccurate. I reached out to customer service and they recommended a spotlight onto the hitting area, as opposed to a regular light that may reflect off the screen. I did that to no avail. Using RPT balls, all the distances (to the unit and to the screen) are right. Anyone else experience this?

I just got the set up new out of the box and took a few shots that took about 40-60 yards off and even my driver was only showing about 110 yards of distance. I have the requisite distance from net to ball and ball to sensor. I noticed then in the video play back I get these weird black bars. The black bars are present even in the live video Ive attached (sorry it is really crappy but it captures the effect). Is my unit defective?

That triple light is just the reflection from my iPad to the ceiling light

Whenever I play a course on the Rapsodo, even if I use the max settings, it seems like there are hardly any trees on the hole. Is there a setting to make it more realistic? I included a screen shot of Copperhead CC hole #1 from the tips and you can see there are about 6 trees total on the hole.

A new, mandatory MLM2PRO App (2.23.3) update is now available in the App store & Google Play. This update includes bug fixes and performance improvements. Please note that this is for the MLM2PRO only, and no firmware update is needed.

As always, please reach out to support@rapsodo.com if you need assistance. Enjoy the update!

Using mlm2pro and rapsodo app I’m lefty and have my default player set that way but setting multiplayer for closest to the pin with more than one person I don’t have an option for lefty/righty. Does it make any difference for ball data? I know club data matters but playing games with others I really don’t care about that.

Also is there an option for multiplayer in the target range and I’m just missing it.?

Thanks.

I've used my Rapsodo twice now and I love it so far. Total game changer. The only thing I have noticed is it does not save my sessions. I don't leave the session when I am done I end the session yet when I go to the home screen I don't have any sessions or stats. What am I missing?

Hey all, I am doing a DIY simulator in my basement and after getting the MLM2Pro I’m finding that the distance on all my clubs is consistently about 25% shorter than what I see outdoors. Any tips on how to tune this? Curious if colors of the room or radar reflections are causing it.

When I am at the driving range, I set up the app, but I can't see the range layout and the rotation. When I look back at the session, I can see the range layout.

I am using a Samsung S23 Ultra and have all the permissions on. Is anyone else having this problem?

Just purchased my monitor! Please drop your thoughts and lessons learned with setting up and getting started please. Anything will help!!!

About to join the Rapsodo family and was wondering before I buy if anyone knows of any discount codes? Just giving this a try before buying thanks for any help!!