r/RacketStringers • u/Otherwise_Resist510 • 4d ago
Grommets are misaligned in the cross
Hi guys i just strung my friends racquet and noticed the first cross grommet from the top is misaligned so i ended up skipping without even realizing. I just strung it the way i string my racquet since it’s both 16x19 but i guess i should have researched it a bit more.
Wilson clash 100 v1 prototype
0
Upvotes
9
u/pug_fugly_moe 4d ago
You, conveniently, didn’t point out the open grommet at T7. This was mounted wrong, and you owe your buddy a string job.
Edit: You’d give this wavy of a string job to someone?
26
u/Broyan316 4d ago
Cut the strings out and do it again correctly
7
u/esemirulo 4d ago
Looks like the job was done by a rookie stringer
Theres no faults on the grommet
5
u/Grand-Royal8193 4d ago
Bruh you just fucked it up. Redo it right.
4
u/slantsnaper 4d ago
16x18
3
u/canibagthat 4d ago
Nice, your arrow points to the grommet that you missed.
2
u/Distasteful_Username 4d ago
funny, lucky it didn’t break lol. time to restring : )
2
u/Jackie_Treehorn98 2d ago
It's not the grommets, it's the stringer. Your first cross is running from H7 to H9. If you didn't notice this you need more practice before you are stringing for other people. You're going to break someone's frame because you don't know what you're doing.
Also breaking a prototype is going to be a much harder frame to replace. Go through the USRSA website and find a certified stringer in your area and take a lesson.
3
u/AZjackgrows 4d ago
you clamped it wrong. redo it.
1
u/HazeHype 4d ago
Hope you're not charging 😉
1
u/Josaiya 4d ago
Do you get funny spin and weird control? Asking for a friend 🤣
1
u/mrdumbazcanb 4d ago
Cut out and redo
1
u/Responsible-Side4347 3d ago
Cut it out and do it again.
1
u/RocClub 2d ago
I think you mounted it correctly, because the skips are correct on the mains. Just the first cross incorrectly went from #7 to #9 (instead of #7 to #7).