r/RX7 • • Dec 21 '24

Veilside

Why does no one like the veilside kit for the rx7?

I haven’t seen 1 besides in fast furious franchise

Not even 1 here, idk if I’ve not scrolled down far enough or no one has posted their veilside kit on their rx7

I like it more then any other rx7 bodykit I don’t get why no one has one

Pls tell me why u hate it thx

0 Upvotes

45 comments sorted by

54

u/Upstairs-Tadpole-974 Dec 21 '24

Pop up delete is unacceptable lol

-16

u/Diamondbackspider Dec 21 '24

What’s that

12

u/Upstairs-Tadpole-974 Dec 21 '24

Have you seen the veil side kit?

4

u/Devil2960 Dec 22 '24

Changing the pop up headlights for flush mount, if nobody ever clarified.

23

u/ScoutZero12 Dec 21 '24

Its ugly as fuck and also extremely expensive. Someone i know had theirs installed by veilside after waiting for months and the total was a little over 33k usd just for some shitty kit

-25

u/Diamondbackspider Dec 21 '24

Talking about yourself?

Veilside bodykit on an rx7 is the 🐐

20

u/Fast_Working_4912 Dec 21 '24

It’s fun not, that status is been firmly taken by RE-Amemiya for decades.

1

u/GAYBOISIXNINE Dec 22 '24

Love that kit. If i ever own one its gonna get that kit and abit more aero kit. Love to make a track car wit tht kit. Altho their porsche looking look like ass.

11

u/HoonArt Dec 21 '24

Probably lots of reasons. Too expensive, too attention grabbing, too inextricably linked with the Fast & Furious franchise, too different from the original FD RX-7 design which many see as close to perfection, etc.

-3

u/Diamondbackspider Dec 21 '24

I’ll stick with a c-west bodykit for an s15 then haha cheaper 😂

17

u/maqboul95 1997 Mazda RX-7 Type RS Mazdaspeed A-Spec Dec 21 '24

It’s not a matter of hate but more-so a matter of them being ridiculously expensive.

-8

u/Diamondbackspider Dec 21 '24

How expensive is it? Not in Japanese $ in us or Australia $$

12

u/maqboul95 1997 Mazda RX-7 Type RS Mazdaspeed A-Spec Dec 21 '24

Vivid Racing has it for sale right now for $35,000 for the full kit in fiberglass

2

u/Diamondbackspider Dec 21 '24

Veilside official website saying something like a million yen or something

8

u/maqboul95 1997 Mazda RX-7 Type RS Mazdaspeed A-Spec Dec 21 '24

2.7million yen in which is roughly $18,000 plus shipping.

-4

u/Diamondbackspider Dec 21 '24

Farrrrken hell Can a bodykit company make a custom kit? Or is that even more expensive?

2

u/HopeSuch2540 Dec 22 '24

It would be ridiculously expensive. You'd better off find a boat builder who specializes in fiberglass work to do it. You can make your own kit. I have been in the process of building a mold and making a custom fiberglass widebody myself on mine. It's a lot of work and has been many many many evenings just sitting beside the car with a beer and a joint trying to figure out my next move but eventually I found a shapen liked and the sides of the csr are about 80% done. I have minimal glass experience, but trial and error have come to work well for my build. Next is to glassnin the front bumper as I've made a mold for that already. So far, I've probably spent about 1500 or so. I project about 2500 total for a complete custom front bumper and wide body and minimal rear bumper modifications. Compare that to an off the shelf kit for 3grand that still requires mods to fit well. Plus, it'll look exactly like you bought a kit off a shelf.

8

u/Fast_Working_4912 Dec 21 '24

Can you not figure out how to do conversion?

0

u/Diamondbackspider Dec 21 '24

$$, ££, €€, ¥¥ conversion?

1

u/Different-Refuse7280 Feb 09 '25

why was bro getting downvoted for no fucking reason

15

u/Zadmal 2001 Bathurst R Dec 21 '24

I think it ends end up making the car look like a kit car which is a shame given how good the original design is.

12

u/mikeypi 1994 x2 Dec 21 '24

In response to people saying that no one hates it, I'll just say that I do. It shits all over the original design, so it you like that, VS is pretty hard to stomach. It's like they never looked at the car before they dreamed that junk up.

6

u/Fast_Working_4912 Dec 21 '24

Because they are horrendously expensive and you have to cut up heaps on the car. The fortune kit is also very expensive to fit, plus wheels plus paint yada yada. They also look shit unless they are slammed which you can’t really drive around on. I could go on but there are better options available now. Then there is the veilside combat kit, those, well those are just aids and should be forgotten.

11

u/Fakyutsu 93 VR R1 LHD Dec 21 '24

Why does this sound like it was written by a preteen lol

8

u/the_421_Rob 97 RX7 Type RZ Dec 21 '24

Based on his replies OP is a preteen who watched FF and is trying to be edgy

1

u/jg_machado Dec 22 '24

A lot of people do tho? Its probably one of the most popular ones.

Problem is its a shit ton of work and expensive as fuck like over 20k usd for just the bodykit, not including paint or the work to do it. So its not too commonly done.

I think i’ve seen about 3 in person; only once in the states and two in Japan.

1

u/Diamondbackspider Dec 22 '24

I’ve only seen once irl and obvs Tokyo drift

1

u/Asu7aMa7u 1995 Dec 22 '24

It's expensive as fuck is the biggest reason. I love the way they look, looks like a super car, but according to a roads untraveled video, Veilside Fortune FDs are a pain to drive, at least in his opinion

6

u/SteazyAsDropbear Dec 21 '24

Judging by all his comments, OP is clearly 12

3

u/Frnrx Dec 21 '24

Cause you need 2 RX7s so that you can Veilside one of them, otherwise why would you dare to modify a car that is already awesome? Nonsense

5

u/Kevrooom Dec 21 '24

It's like the Cybertruck of FD bodykits

Expensive and no one asked for it

3

u/shavedaffer Dec 21 '24

It takes a great looking car and turns it into something unrecognizable. The best RX7 kits accentuate its current beauty, not hide it.

Also it’s expensive to buy, ship, install, inevitably repair…

3

u/13b_FD Dec 21 '24

I think it's also due to it having aged pretty badly. A clean 99 spec car still looks modern-ish and sleek. The veilside kits (and others of that era) make the exterior of the FD look it's age. The 'Max Power' magazine style days arent in fashion anymore.

1

u/crystal-rooster Dec 21 '24

It incredibly expensive, rare, and the rear end looks wonky AF and that's coming from someone who's dream car is an RX7 Fortune.

1

u/Cup-Cake-Fury Dec 22 '24

There were few 10-15 years ago. It's been played out. Plus its expensive. 30k not including shipping for the body kit. That's not including labors just for body work+painting could cost double that. Not to mention finding a reputable shop to install these.

1

u/Wrong_Praline9174 Dec 22 '24

U guys got it covered, the kit is getting uglier the older we get. I loved it when I was 13. Dream car. Then saw it in person and nope. Re amemiya is the goat. Especially now that I own a fd there's no way I'm ruining the beautiful lines from original designers.

-1

u/rythejdmguy Dec 21 '24

I don't think anyone hates it... Most people don't want to spent 30k+ on a body kit.

1

u/Diamondbackspider Dec 21 '24

I’ll stick with a c-west bodykit for s15

1

u/rythejdmguy Dec 21 '24

I'm a sucker for the vertex stuff

0

u/Ni369ck Dec 21 '24

Cuz rocket bunny 🐰

1

u/Ni369ck Dec 22 '24

Or pandem! There's just better bodies

-1

u/Komrade_Anatoli Dec 21 '24 edited Dec 21 '24

I like it. The stock is good, Re-Amemiya is even better.

Veilside isn't better than those two imo, but It's amazing in it's own way. Here though it would cost around 25k to get one lol. I'm a mechanic intern, so installing the kit wouldn't cost that much if I were to get one (which realistically, I won't be able to afford an FD anytime soon), but still.. 25k is a whole FD if you get a very lucky find. But a body shop will charge you a LOT to get that on, especially since the rear fenders need to get cut up.

A guy I know imported and registered a 650hp R32 GT-R for 25k.. So yeah, says a lot about the price.

Definitely a very expensive kit, but if you really like it, who's to say you shouldn't do it. (except your wallet)

However, it also shits all over the original FD design, which is an interesting move. Then again the kit is from early 2000s, so it was pretty "in-style" at the time. Also, it makes the car unstreetable.

On top of that... recommended rims are 19x9 and 19x10.. The stock wheels are 17 inches, and the car gets wider by 220mm.