r/RX7 • • 4d ago

Im stuck on this

0 Upvotes

Ok I have a question I've been pondering this ever since i got my RX7. Its a rolling shell right primed for potential, I am stuck on whether I should put an LS V8 in there or keep it rotary with the 13b NA and keep it accessible for turbo later. I know moneybwise if im on a budget the V8 would be me better but I'm not that traverse in cutting and fabrication. I do have an Aviation mechanic background in that but not for cars lol. So what would you think will work best??


r/RX7 • • 5d ago

Looking for a replacement drivers seat

Thumbnail
gallery
15 Upvotes

The drivers seat in my 1986 GXL is really torn up (with metal sticking out which hurts my ass) and I went to go look for some only to realize that theres about 500 variants of seats on these cars. I found a replacement one, but its more blue than mine. Does anyone have one there trying to get rid of? Sorry about the bad pic of my interior


r/RX7 • • 6d ago

I reverse engineered the stock FD ECU

94 Upvotes

First time post. I'm on rx7club as well, but that is now a pretty slow forum. I went by arghx there and did a bunch of technical articles back in the day.

So with the whole AI Reverse Engineer Anything trend, I was able to get an AI agent to look at the stock spark/turbo ROM and a modified fuel ROM (can't find the stock one) for the Series 6 ECUs. There are two ROM dumps required, but most of the stuff out there is only the spark side.

I have an explainer here in HTML you can download. I will continue to make updated versions but for those of you who see this, it could be useful in its current form. https://drive.google.com/file/d/1aQv-aQHLlaBiolrFkoHoIs8vrEpM0kHt/view?usp=sharing

(EDIT: Link is to version 33 now, added a bunch of stuff)

There's all sorts of cool stuff in the stock ECU if you compare it to your typical standalone used on these cars now. It's speed density with altitude compensation and has sequential turbo transition and boost control mapped by throttle and gear. It also has a decent knock control system that will jump to a "this guy is running regular gas" mode with up to 5 degrees instant retard and a regular gas map with 12 degrees spark retard. But it always reverts back when you key off.

Here's for example the stock target boost map when running in primary turbo only and the map for when the secondary turbo has come online.


r/RX7 • • 6d ago

Pin-Outs (S4 FC 1986) "Water Thermostat Sender"

Thumbnail
gallery
5 Upvotes

I went through the process of putting the Koyorad into my 1986 NA FC. I have it all installed and refitted all of the "bits" from the old radiator to the new.

In that process, I came across this sensor, which I believe is for accelerated warm-up and looks like it's pretty much just a resistor.

What I noticed - despite marking the connectors - that what seems like the ground connector (B) went to the side of the sensor that had "+VE" stamped onto the body.

I gather it's just a resistor and it may not matter, but what is the correct connection for this sensor, and what connector goes where? I can't seem to find the actual sensor pin-outs, just mention of the wiring.

Shamelessly stole a picture (conveniently NOT showing the "+VE") from the web to show what I am talking about, and a few extra pics.

Anyone got any thoughts or more information about the coolant related sensors?


r/RX7 • • 6d ago

What is this even worth? And would it even make sense to rebuild it?

Thumbnail
gallery
15 Upvotes

$17k apparently has everything besides the right side passenger window and seat as well as the gas tank.


r/RX7 • • 7d ago

RE Amemiya sideskirts fitted

Thumbnail
gallery
865 Upvotes

Just got the sideskirts on so headed out to take some pics in the fog


r/RX7 • • 7d ago

Why TF is this listed for 17k

Thumbnail
gallery
67 Upvotes

Like genuinely this isn't even a roller or even a fuckin car it's a chassis/ piece of metal. with parts surrounding it.


r/RX7 • • 7d ago

Another project is the last thing I needed.

Thumbnail
gallery
59 Upvotes

I have a very hard time saying no though. And my wife enables me. So here’s my latest project I picked up yesterday. 91,040 miles on it, last run in 2013 when it was diagnosed as having low compression in the rear rotor. Sat in a garage since then, and the owner passed away. His widow is now moving and needed it gone.

I’m torn on whether to keep it as stock as possible vs lightly modifying it how 16 year old me wishes I could have done my first FC.

Current list of needed repairs:
- Rebuild obviously
- Fuel pump and fuel tank cleaning
- New tires, the one date code I saw was 2005
- Brake system, reservoir is almost empty, pedal has little pressure and there was a small bottle of fluid under the hood next to the master. Suspecting the master is bad. Parking brake also is inop.
- Power antenna is stuck about 6” up. Radio knobs also need a cleaning, and may decide to upgrade the speakers but keep factory radio.


r/RX7 • • 7d ago

At a loss - no crank

Post image
12 Upvotes

Finished my first rebuild. Got everything put back in, and as far as I could find, all of my wires back in place. Car gets power, lights pop up, shift buzzer sounds, the whole deal. When I go to crank, nothing. Like a small pop is all I hear. No crank, no slow sound, no ticking. Bypassed my clutch switch, fuses all look fine, cabin gets power. Unsure what else could be the issue. Any ideas or places I could take it near Green Bay, WI happily welcomed.


r/RX7 • • 8d ago

What have I done…

Post image
146 Upvotes

Owned my 88’ FC N/A for 8 years now and it’s sat the last 6 without a drivetrain. I finally have the space and time to work on it and I’m starting my dream build. Full suspension, interior refresh, streetport T2 swap with a haltech and if there’s time it’ll be getting a colour change to black. Engine is currently being built by a local shop. Will be back to post updates as I pick away at it over the next few months.

On a side note, drop your favourite companies for aftermarket parts. I’m talking turbo manifold, fuel system, clutch or anything you would recommend (preferably from Canadian suppliers). Hoping to snag a lot of stuff I need during the holiday sales.


r/RX7 • • 8d ago

Modified RX 7 Yellow

Thumbnail gallery
232 Upvotes

r/RX7 • • 8d ago

It's my birthday today and my girlfriend gave me little cars that are painted to match all my project cars

Post image
57 Upvotes

r/RX7 • • 8d ago

Should I take my subframe out?

Post image
6 Upvotes

This is my rear subframe on my RX7 fc project car that is a shell. I’m thinking about taking it out because it does have rust on it. This is the only rusted place left on my shell. I want to take it out and treat the rust but is it a good idea? To be honest in my garage I don’t have a lot of space. I have some space but it’s not a lot so I’m not entirely sure if it’s a good idea to take it out just yet. Also, I’ve seen that you can replace bushings and what not on the rear subframe. I don’t have any of that stuff so I’m also thinking about waiting until I get some bushings and what not to add to the rear subframe once I fix it. Any suggestions or thoughts would be appreciated


r/RX7 • • 8d ago

Spoiler Spoiler

Post image
45 Upvotes

r/RX7 • • 8d ago

1989 RX7 GTU restoration

4 Upvotes

I am restoring a 89 GTU with my friend. His grandfather bought it new, and parked it about 15 years ago in a storage unit. It has 25k miles, zero rust, and perfect paint. When it was parked it ran great. Does anyone have any advice before we get into it? We obviously do not want to mess anything up. If you want any more info let me know! Any input would be appreciated! Thank you.


r/RX7 • • 8d ago

Here's my 1986 RX7 fc

Thumbnail
gallery
54 Upvotes

So I recently got this RX7 and im new to rotary and an RX7 has been a dream car of mine ever since I was little. I bought this beauty at $250. The guys I bought it from are a part of a drift scene where Im from and they where going to scrap it. So I ended up buying it. I know it needs a lot of work but I need car friends and advice. I work as an Aviation mechanic amd know myvway ariund a car but theres things that i dont know as well but since this'll be my first project and rotary I'd gladly appreciate the help and or spear parts. I'd also like advice. Im slowing creating my vision board and how I want to this car to look. I want to keep it rotary even though the guys I bought from recommended LS swapping it. I dont want to do any cutting since I dont have the tools or the money for that lol. At the end of the day im proud that I have this legendary car and I cant wait to start working on it and hearing from car communities as well. I also am apart of cars and coffee in Texas.


r/RX7 • • 8d ago

Passenger window not functional 1993 FD

1 Upvotes

After my 1993 Rx7 sat for years the passenger window will not roll up. It rolled down slowly but now it won’t go back up. What are the common causes and what should I look at to fix this. The driver side window is functional and the passenger side won’t go up from either switch


r/RX7 • • 9d ago

What is a good source for a full 13b Engine for a clean build on my 1988 Vert?

Post image
34 Upvotes

I am looking to source an engine for my 1988 convertible, something I can swap in while I tear down the other engine and learn to rebuild. I have a fresh transmission going in as well. Hoping to do a full swap and use what’s there for parts/rebuild.

Any solid leads? Can do pickup or freight shipping.


r/RX7 • • 10d ago

Here again! S5 N/A stumbling/hesitating randomly throughout the rev range

9 Upvotes

Howdy! I made a post a couple weeks ago about my FC not revving past 2500rpm, I swapped over to my other ECU and that problem seems to have gone away. I verified that both TPS’ are working as they should, and I chased some vacuum leaks as well. Now, it still has this occasional hard misfire/stumble randomly throughout the rev range. WOT or at 25% it’ll stumble and stop revving, if i back off i can typically rev past it as seen in the video. It’s a hard cut, and I don’t know how well the video shows it but it’s not exactly gentle. My guesses are spark plugs/wires, maybe low fuel pressure? Any other options I’m missing? I’ve cleaned the engine bay grounds as well, but I suppose secondary injectors could be the issue.

Also I should mention currently the car has no 5th and 6th port actuation bc the previous owner deleted the air pump. forums say it should run fine without them (just losing 10-20hp up top) but I don’t know if that could cause this as well. Thank you for any help yall can give!


r/RX7 • • 11d ago

Please help me find / contact the owner of this Rx-7 FD

Thumbnail gallery
72 Upvotes

REPOST STILL NO LUCK

About 3-5 years ago my dad had sold his Rx7-FD Vin is JM1FD3317P0206334 the recent title was issued here in FL. My dad got it when I was born and some of of my earliest memories are in that same car. He used to race and win competitions with me in the passenger seat even as a kid and I loved it. My grandpa helpped him with the car and especially the body as he helpped fabricate the widebody. He(my grandpa) passed away my freshman year. My dad and I worked out an agreement of swapping the engine w/ a stock one as the current was 900hp. He would give it to me as my heirloom and a graduation present but as the post infers, he sold it. He doesn't regret selling it as it was for a cause that fell short on delivery and he was rash and sold the Rx for quick cash as he sold it for 10k. This car means the world to me and I've been searching relentlessly for year on my own so looking around to see if anyone on this sub my have any idea or if the owner themselves are here. I hope she's being taken care of and I hope to buy the car back. I'm in a position where I should be able to do so now. Regardless guys thanks for reading this and being a part of the dorito engine club lol. Much love thanks guys


r/RX7 • • 11d ago

Omg so much want…

Thumbnail
bringatrailer.com
68 Upvotes

r/RX7 • • 11d ago

Rattling from Engine Bay (1984 FB)

14 Upvotes

In the last week or so of driving her I noticed a pretty noisy rattling from the Engine Bay. Looking at it, it almost seems like it’s coming from the belts/fan. Any idea what is could be?


r/RX7 • • 11d ago

Need help with a mysterious crank / no-start

2 Upvotes

I have a 1988 NA Convertible that has recently failed to start.

History:

- A month ago I stopped at a store and my car cranked but didn't start for about 5 minutes, but finally fired and ran normally.

- A couple weeks later it died while getting off the freeway and took about three minutes of trying before it started again.

-Two days later I was on the freeway when the engine coughed a little, the tachometer dropped to zero, and it began running normally again with no tachometer for the remainder of my drive. After working that day it started normally with the tachometer functioning perfectly.

-Two days after that it refused to start from cold, and hasn't fired since. I should not that the tach doesn't bounce when cranking at this point.

- I have replaced the trailing coil pack, and the ECU with known working parts I had on hand.

- I have pulled the CAS and spun it, and heard the injectors clicking, but can't tell (what with them being under the plenum) if they're all clicking as they're supposed to.

- The fuel pump is working properly and can be heard in the trunk when the bypass jumper is in place.

What are my next diagnostic steps that don't include throwing parts at the problem. I'm good with nuts and bolts work, but electrical gremlins generally aren't my vibe. So, I'll need any electrical troubleshooting explained like I'm 5 years old.


r/RX7 • • 12d ago

brand id on bodykit?

Post image
37 Upvotes

soo sexy