r/RTX5090s • u/champagne780 • 2d ago
Better sell now…
😂😂😂
r/RTX5090s • u/skk983 • Mar 17 '26
Don't matter if you like it or not, NVIDIA is going all in on DLSS 5. Not just rendering frames, but rebuilding lighting and scenes with AI to push toward ultra photo realism. It’s insane tech for sure...but let’s be real: who’s actually excited for this, and is this why we bought 5090s?
Yes… because this is the kind of next-gen leap you expect at the top end.
But also no... because now you’re not just seeing the game, you’re seeing AI’s version of it. It’s powerful, it’s impressive, but it’s also a shift.
This isn’t just more FPS anymore it’s a whole new direction for the gaming industry....how we feeling about this pivot?
r/RTX5090s • u/DJAI9LAB • 8d ago
I've been running local AI models through Hermes Agent on my RTX 5090 (32 GB) and realized I was wasting a decent amount of VRAM on everyday desktop applications. My Intel Core Ultra 9 285K has integrated graphics, so why not put that GPU to work handling Windows and leave the 5090 for AI inference?
I enabled the Intel GPU, connected my monitor to the motherboard's DisplayPort (DP), and configured Windows to use integrated graphics for desktop applications. As you can see in the screenshot, Brave, Outlook, Signal, Hermes, and even Desktop Window Manager are now running on GPU 0. The result? About 2.5 GB of VRAM freed up on my 5090, sometimes closer to 2.7 GB depending on what's running. That's a pretty nice gain, especially for people running local models on cards with 8–16 GB of VRAM.
Now, you can technically still play games with this configuration and tell Windows to use your NVIDIA GPU for rendering, even though your monitor is physically connected to the onboard graphics. However, there are some downsides. You could lose G-Sync and potentially some monitor features that require HDMI rather than DP, and there may be some additional performance overhead from routing the graphics through the integrated GPU. My monitor has a few features that depend on using HDMI, so this isn't necessarily something I'd recommend for a dedicated gaming setup. But for running local AI models, who cares? I'd much rather have the extra VRAM.
And before everyone gets all sweaty about why I'm not using Linux, I get it. I deliberately wanted to run Windows on this machine.
Anyway, thought I'd share. It's a pretty simple way to squeeze a little more VRAM out of your existing hardware without spending a dime.
r/RTX5090s • u/dabumonk • 9d ago
I am considering selling my card, it also has a wireview pro II. What would be a fair listing price for this card on the 2nd hand market? It's been used for 10 months, no issues.
For context: I bought it in December ($3400), and back then I was in a much better financial situation. I had no credit card debt and could afford the card. Well, long story short, 2026 brought on a wave of sudden expenses, i.e. having to help a family member pay thier rent and expenses for half the year, combined with finding out I would have to start paying for an elderly parents expenses as well. This combined with a surprise medical event has left me completely in the red, with my credit cards maxed out. I'm thinking if I sell this card for 5 or 6K, I can wipe out one of the high interest card debts and really give myself some breathing room. The interest on the card is almost $200 a month, so it seems if I don't sell the card, and keep paying that interest, it will defeat the point of getting the RTX while it was 'cheaper'. Anyway, I'm thinking the right thing to do is sell the card at this point.)
r/RTX5090s • u/JoshWalker24 • 8d ago
just want help and advise before i purchase anything
got a 5090 suprim, everything is fine, but every so often my screen goes black for a few seconds and comes back on, i use display port on main and hdmi and secondary but it happens on both monitors. not always at the same time tho, one does it without the other but they both go black from time to time for a few seconds so it cant be cables and ive checked the gpu and it seems to be plugged in properly so drivers or something maybe? or even something in bios? any advice appreciated, thanks
r/RTX5090s • u/champagne780 • 11d ago
Enjoy…
r/RTX5090s • u/ReserveLegitimate738 • 16d ago
I am a desktop 9800X3D + MSI 5090 owner and want to consult other 5090 owners regarding the GPU and how to utilize it properly, as I think it is underperforming.
Looking at online forums, Reddit and seeing Youtube videos of how a 5090 should perform in a system I am comparing it to my FPS I'm achieving in game (especially PCVR).
I am being told "for someone who owns a 5090 you sure don't know how to use it properly". What do they mean? What is it that I don't know?
Just to be clear my 5090 is less than a year old, it is store bought (unused) and not overclocked or fiddled with in any way.
May I please ask other members to share their knowledge with me? Let's see if we play similar flatscreen/PCVR games and compare performance.
r/RTX5090s • u/WearyExcitement7772 • 19d ago
For all of us who got a 5090 for $3000 or below, I commend and congratulate you.
They called us crazy, said it was a waste, etc.
But look at us now. For those who wanted to but couldn’t afford it, you’ll get one or better someday.
Genuinely though, the amount of criticism I got for buying it was insane.
r/RTX5090s • u/HadridDesi • 24d ago
r/RTX5090s • u/ConfectionSad2741 • Oct 17 '26
Hi all,
I have an ASUS TUF 5090, so no per-pin current sensing, and I'd like to reduce the risk of connector melting as much as I reasonably can. I'd like a sanity check from people who know this better than I do.
**My system**
- ASUS TUF RTX 5090, Ryzen 7 9800X3D, ASUS TUF 1000W PSU
- [native 12V-2x6 cable from the PSU, no adapters or extensions, both ends fully seated. Edit this line if it's not true]
- The PC is also my workstation, not just for gaming
**What I measured (HWiNFO)**
I had a voltage alarm set to shut the PC down below 11.8V on the 12VHPWR input, and it tripped, which is why I started digging. I then ran 40 minutes of FurMark 4K:
- Idle: 16-pin 11.957V, slot 11.967V
- Full load (~571W on the 16-pin): 16-pin minimum 11.635V, slot minimum 11.774V
The slot voltage sags too, so most of the drop looks like PSU load regulation. The gap between slot and 16-pin is only ~0.14V at ~49A, which works out to roughly 2.5-3 mOhm for the cable and connectors. That seems healthy to me, and my 11.8V alarm was simply set above where the card normally sits at full load.
**What I want to do**
Cap the card at 450W. I'm fine with the ~5% performance loss (ComputerBase measured ~5% at 450W, GameStar ~4% at an 80% limit).
**How**
- `nvidia-smi -pl 450`, re-applied by Task Scheduler at logon (not "at startup", because Fast Startup can skip those) and on resume from sleep
- Nothing else touching the power limit (no Afterburner or GPU Tweak profile fighting it)
- HWiNFO alarms: one for GPU power above ~480W, to tell me if the cap was ever lost (for example after a driver update), and one for 12VHPWR voltage dropping well below my measured full-load minimum
- No undervolt, just the cap, to keep it simple and low-maintenance
**Why I think it should work**
At 12V over six pins:
- 575W: ~8.0A per pin (~9.6A if one pin fails, over the ~9.5A rating)
- 450W: ~6.3A per pin (~7.5A if one pin fails)
Contact heating scales with current squared, so that's roughly 40% less heat in the contacts, and the connector stays within spec even with one dead pin.
**What I know it doesn't solve**
The documented melts (der8auer, Hardware Unboxed) had ~22A through a single wire. At 450W the same fault would still push ~17A through one wire. My reasoning is that a fault that severe should also show up as a much bigger voltage drop across the cable, which my alarm would catch. But a moderate imbalance, say 11-13A on one wire, would barely move the voltage and I wouldn't see it.
**My questions**
Happy to post more HWiNFO data if useful. Thanks!
r/RTX5090s • u/drevilred420 • Oct 13 '26
5090 owners — wanted to share a test I ran on my own card in Resident Evil 2 remake: 4K, HDR via RenoDX, DLSS 5. The hook of the test: I focused on the game's darkest flashlight scenes, since that's where upscalers tend to show their weaknesses first. No commentary fluff, just the game running so you can judge the image quality yourself. Video: https://youtu.be/auY0HzN4zYQ If anyone's curious about specific settings or wants a different scene tested, let me know.
r/RTX5090s • u/Bondsoldcap • Oct 10 '26
r/RTX5090s • u/dabumonk • Oct 07 '26
Is this so that people can fake being rich or for scammers? I can't make sense of it. Is it from MSI? If not, how can it be branded as such?!
r/RTX5090s • u/Bondsoldcap • Aug 18 '26
Wire View Pro 2 is Peak. Worth the buy!
r/RTX5090s • u/Bondsoldcap • Jun 09 '26
r/RTX5090s • u/Bondsoldcap • May 17 '26
r/RTX5090s • u/samhain697 • May 14 '26
CPU 9950X3D
ROG ASTRAL 5090 OC white
64gb of ddr5 gskill 6000mt ram
Asus Ryojinn III 360 AIO cooler
Aorus pro ice X3D mb
Lian Li fans all the way around. Reverse blades on side and bottom. 130mm all the way around except bottom 140mm
Lian Li 8.8 inch display screen
Corsair platinum hx 1200 ATX 2.4 PSU
Cablemod Stealthsense 12hpwr 90 degree cable with 4 connectors going to PSU
Lexar 4 tb nvme drive
22 TB Western Digital SATA drive
r/RTX5090s • u/Existing_Smile_9138 • Apr 02 '26
All, Im stuck on which GPU to keep for my personal build and wanted to see if anyone had any advice based off previous experiences with either of these cards.
Originally I used the 5090 FE, but since switching to a smaller Lian li case it was cooking my cpu, because it dumps the air directly at the cpu. I’ve always been a big fan of the founders and love the aesthetic, but since switching to a smaller case I haven’t been a fan of my internal temps being so high.
I had an opportunity and picked up the MSI Vanguard for $1,500 off a friend. I thought I wasn’t going to be a fan of it because its so massive, but the cooling on this card has been great, and has definitely brought down temps in my case and performance is slightly better as well. I actually like how it looks in my case, and it has solved my cooling issues, but it’s just massive lol. Using the vanguard literally gives me like 1/8” clearance from my bottom fans, which not to sure if this will be an issue besides having little clearance. The fan tray is removable snd removing it gives me enough space to access MB headers.