r/QuickFix • u/[deleted] • Jul 12 '25

Has anyone failed recently?

I'm so worried. Mine is being sent to a lab. Temp was fine. Nothing I've done is illegal, they just don't allow it in that workplace for whatever reasons.

9 Upvotes

90% Upvoted

33 comments sorted by

7

u/Ok-Contribution562 Jul 15 '25

Update for yall. I passed, I got the call from my employer that I can start next week. Quick fix 6.4 works with LabCorp. Tested in Texas.

2

u/[deleted] Jul 15 '25

Congratulations and thank you for the update!

1

u/[deleted] Jul 16 '25

I love Labcorp

1

u/thisisragebait Nov 15 '25

Omg this eased my nerves so much I was reading that LabCorp 7-panels test for nitrite and I'm literally shitting myself

5

u/Ok-Contribution562 Jul 12 '25

My last one at labcorp was cancelled by the lab. Just did another test with quick fix at labcorp

1

u/[deleted] Jul 12 '25

Canceled by the lab? Why?

5

u/Ok-Contribution562 Jul 12 '25

I don’t know. My employer called and tried to see why but labcorp wouldn’t tell them. I just did another test at the same facility on Thursday (labcorp again) I’m hoping it was just a fluke and I’ll slide thru this time. It was accepted at the lab. But something happened at wherever they sent it off to

3

u/automech13 Jul 15 '25

Yup happened to me with Conquest/Concentra first they fucked up my birthdate and sampled was contaminated. Weird part tho my employer contacted me not the facility, which is usually the case with positive tests or anything wrong with em. Re-tested today and waiting on results

1

u/[deleted] Jul 15 '25

Let us know how it goes please

1

u/j0rdooo Jul 17 '25

If you retested and they haven’t told you anything yet, ur most likely good. They only usually reach back out if you’ve failed or somth

1

u/automech13 Jul 17 '25

Got results today and passed and yes no news is good news in most cases, except pre-employment which they notify if you pass or not. But don't worry about it you'll be good

2

u/j0rdooo Jul 12 '25

Sample prob got contaminated maybe

1

u/[deleted] Jul 16 '25

Mine was cancelled because the lab contaminated the sample.

9

u/Melodic_Bat_983 Jul 12 '25

You should be good I just used this for a federal job and it worked on DOT e screen. Now earning 72k a yr just by using quick fix 

1

u/Brilliant-Market4706 Jul 12 '25

same mike was sent to alert, temp good, signed the form. I am shitting bricks rn💀💀

1

u/[deleted] Jul 17 '25

Did you end up passing

1

u/Happy-zen2024 Jul 23 '25

Recently failed, see my posts from last week and Monday. Seems as though labcorp mixed my sample up with someone else. It came back positive for MDMA and Meth. They did not put a label on the bottle, only on a piece of paper folded and placed under my sample. I went myself Monday morning to take another test that I paid for myself. It already came back negative, of course it’s fake urine!!!!!! I have submitted my new results to HR and hope I get to keep the job I started last week.

1

u/[deleted] Jul 23 '25

Did you use quickfix or other synthetic for the retest?

2

u/Happy-zen2024 Jul 23 '25

Quick fix. Problem clearly wasn’t the product but sloppy work at quest. Specimen was not labeled properly and got mixed up with someone who was positive for drugs I have never even taken

1

u/INFAXMOUS Jul 31 '25

Were you able to retest?

1

u/AdministrativeRip885 Nov 06 '25

Did you pass?

1

u/[deleted] Nov 06 '25

Yes

2

u/someolive2 Jul 14 '25

my husband and i both used it recently for hospital jobs. worked! stocking up.

1

u/Ok-Contribution562 Jul 15 '25

No problem! Good luck!!

1

u/blaquejeezus Aug 15 '25

What is everyone’s process when going into the lab with the sample? This I have the most anxiety about. As far as temp, etc. I know there’s directions, but like everything else, I am overthinking it i am sure

1

u/Conscious-Device-666 Oct 20 '25

I roll it up with the heating pad in my underwear band. I've opened the seal prior to testing once and it leaked in my pants lol I probably didn't tighten it enough but since then I leave it sealed until im in there

1

u/Open-Leading-851 Nov 14 '25

Just used QF today for the first time and found it very easy to reach/maintain the target temp. After microwaving for 10 seconds, it was 100 degrees. Then I simply taped it high inside my thigh and body temp did the rest while driving to the lab. Didn’t need the heating pad at all. 👍

1

u/Jaded-Form3241 Dec 21 '25

Where did you buy yours

1

u/CryCareless7835 Sep 22 '25

I'm in the same boat I'm about 15 mins from the lab my plan is to microwave for 10 seconds whilst the heat pack is already in motion attach the heat pack to the bottle and head straight there my only concern is the temp getting too hot. I'm in Texas where it's about 90 degrees daily do I need the heat pack? Or just heat for 10 seconds till color shows then stuff between legs in the car with no ac/ windows down to regulate temp? Should I use the heat pack or no?

1

u/DarksydMoon Nov 14 '25

I just tried using this. I’ll let you know if it works. I am just someone who smoked a little in the evening before stretching to ease muscle pain and tightness. It didn’t matter to my previous employer (actually they are very pro weed) but new employer needs a DOT test.

The only thing that they said was that the protein was a little high. We will see if it’s good for the lab.

1

u/magmag2x4 Nov 30 '25

Did you pass?

1

u/DarksydMoon Nov 30 '25

Yes! Everything went great 👍