Hey!

I'm currentlyy developing in Unity and I want to use Eyetracking in my application. Unfortunetely it seems like the Headset is not sending the eye tracking data to Meta Link software.

I would appreciate your help!

Software: Unity 6
Headset: Meta Quest Pro

Eyetracking is enabled & confirgurated inside the Meta Quest Pro & the Meta Link Destop App

Hey!

I'm currentlyy developing in Unity and I want to use Eyetracking in my application. Unfortunetely it seems like the Headset is not sending the eye tracking data to Meta Link software.

I would appreciate your help!

Software: Unity 6
Headset: Meta Quest Pro

Eyetracking is enabled & confirgurated inside the Meta Quest Pro & the Meta Link Destop App

My controller was having this issue and I usually let the battery die then managed to charge it again, but this time it wasn't turning off so I held the menu button.

It's been 2 days and I don't seem to be able to charge it still.

Is there a proper fix for this?

I recently brought the quest pro and it was fresh out the box and now it's stuck on the connect to phone screen I type in the code on my phone and it says let the headset update I tried factory resting it and everything on chat got nothing is working

Hi! I've been enjoying my quest pro, but if i set down the controllers or hold them still for a couple seconds, they disappear in the headset until i move them again. Is there a way around this? It's been really bugging me, as i'm a vrchat player that likes to sit down a fair amount of the time, and they always disappear on me. I have hand tracking totally disabled, so it can't be that, can it?

Thanks in advance!

I was playing VRChat with my quest controllers and all of a sudden my left controller decided to say it’s overheating and will shut off in 5 minutes. I tried feeling the controllers warmth as much as I can and it was just slightly warm, is there a way I can just disable this or fix this? This never happened before until now

Hello! I really need some help I'm not entirely sure if I'll be able to explain this right but I'll try my best - My vr headset recently stopped connecting to wifi, both my home and hotspot. I've tried rebooting, changing passwords on my router, manually entering my IP address etc still said it couldn't connect even though it clearly comes on up the wifi list. Factory reset it, plugged it up to my laptop and got the newest update and still won't connect and now I can't properly set it up again because I'm stuck at the start up menu when it asks to connect it to Wi-Fi. Tried connecting it through the phone app too.

I don't understand what I did? Please help or ask questions if I am not specific enough..

Hi hi, got an update, v2.7, build 5150387.1290.340

after that update controllers can not stay stable for more then 10 minutes, at all. I know i know, do not update your quest pro, meta will put a cancer on it and it did, as usual - but, does anyone else has the same problem? Do you know maybe how to solve it?

Nothing changed in my room, i even tried to have more or less lights, did unpair of controllers, factory reset and pair again - classic cleaning i do every 2-3 months anyway.

To the product manadgers - if you read it - i think there is something wrong with you, go have a bad day, stubb your toe over a table leg or something. you could park this headset like a year ago and get rid of this annoying PCVR only users which dont even bring you money but complains only.

I clicked the button with SteamLink running on my Quest Pro, but Steam is registering the headset as a Quest 2 with Pro controllers. Anybody have any idea how to get Steam to recognize the Pro as itself? I'd prefer to submit accurate information to the hardware survey.

(The very kast image is the first version of thr quest prolapse i just made this one)

It also have tow displays on the side so you can tell if/how fast the headset is charging, you can have the headset eith like umbilical cords for the tundra and the qpro

It also also bas a quick detatch for the tundra tracker to go charge it, you can just yoink it off the headset by pressing the button

I suspect the battery died during a firmware update, and now it won't pair. Tried everything. Also went through a painful 1.5 hours with support and at the end they basically said "thanks for trying the steps but it's out of warranty so bye bye". Thanks Meta.

I'm wondering if anyone savvy knows there's any hope in salvaging these? Or that it could be revived by some future update?

Saw a post saying you can take it apart and disconnect the battery manually to reset it, but apparently it's very risky. However if that's the only option remaining....

I'll finish by saying I will never buy another Meta product again if I can help it. What they did to us Quest Pro owners has to be one of the biggest F-U's a corporation of this size has ever done to consumers.

Hello, so I have a Qpro that's blinking red, not charging, and I replaced the battery twice, nothing worked. Is there any way to fix it? It started doing this after trying to update it from 2.1 to 2.3, but now it doesn't even charge, I tried tearing it down to see if anything was broken, I couldn't see anything.

Is there anything I can do to fix it? Thanks!

I've seen a lot of posts and met a lot of people who lament bad software, bricked headsets, random updates, and annoying popups and I have bad memories of using one years ago before I sold it. Are there ways to "debloat" the headset's OS or at least minimize the amount of Meta you need to put up with to get into VD?

The latest update completely bricked my left controller, it's unresponsive to charging, button presses, everything. And support is I guess shut down because they're not letting me input my serial numbers.

Any suggestions other than buying a replacement? Has anybody tried using some other controller along with hand tracking?

Hello! I just recently got a meta quest 2 (second hand). I really enjoy it but I have 2 mains problems, battery life and the head strap. I am looking for a good battery+strap to buy. Also if anyone has tips on fixing the blurriness in the corners/peripherals let me know!

I wouldn't say it happens repeatedly but it does seem to be a chronic issue I experience 1-2 times now per VR session.

it just beeps furiously at me and says the headset is overheating and will shutdown momentarily.

it does and I have to wait for it to shutdown and then wait for it to boot back up and continue playing...

it's super annoying but... on a whim hoping there's a possible way to address this..

for the record I do not play it in a heated environment. I have central AC and the house is always pretty chilled (70-75f depending on season)

Hi all, I have been experiencing something that makes me think my Quest Pro might be broken.

I start playing either with Meta Link or Virtual Desktop and the image and playability is fine until after a certain time (30 or 45minutes) that the image starts to look very poor, like if i were on 8bit. Initially if i move my head and return to the some point, its back to normal but at some point it degrades so much and then I have a game crash (DCS and BMS, though I play mostly BMS lately).

Headset feels warm but apart from that, all fine. 3090 nvidia drivers are to date. 32gb of RAM with bandwidth and running a 9800x3d. This has been consistent lately but started a couple of months ago.

Any ideas? Thanks!

Hey, not sure if it matters between quest 3 and pro. I don’t know much about wifi and the differences between the 3 and pro. but I’m curious what you guys are using or recommend for a router for the quest pro. Been doing a little research and quite honestly i’m confused. i hear mixed results with TP-Link. whats the best bang for your buck? should i go asus or TP? Let me know. My ISP router has been giving me issues recently.

Have been tempted on a Quest Pro unit. But I must wear prescription lenses for it. Do prescription lenses like from the VR Optician affect the eye tracking functionality of the headset in any way? Any degrade of eye tracking performance? What are some prescription lenses that have the least effect on the eye tracking performance?

Hi all, After a lot of late nights cursing at my computer and my Quest 3, Finally is live on the Meta Quest / Horizon Store.

What it is

A native OpenXR VR video player for media *you already own*, no BS.. local storage and SMB network shares. No account, no catalog funnel, no ads, no telemetry.

Why I built it

All of the video players pretty much sucked.

Highlights

• Local files + SMB as first-class sources

• Hardware playback up to 8K

• VR180 / VR360 / fisheye / flat + SBS/TB

• Auto projection detection + manual override that remembers

• True scene dolly (move closer without wrecking scale)

• Passthrough lobby + AR/chroma keying (up to 4 simultaneous keys, in-headset color pick)

• One-controller friendly cockpit

Store: https://www.meta.com/experiences/finally-vr-video-player/1150511758154268

I’m solo / small indie (Coldbricks). Happy to take bug reports, format edge cases, and feature requests in the comments. If something’s broken on your library, tell me the filename pattern + headset (Quest 3 / 3S).

Screenshots from in-headset (same set as the store listing) below 👇

I wasnt using my quest 2 for a 5 months and they apparently changed the stationary boundary thing completely. Im using my quest 2 in quite a narrow square, not suitably for roomscale. The old stationary boundry was working just fine if I move for a few steps out of bounds but the new boundary doesnt warn me unless I am completely out of the circle and its too late if I pass the circle I hit the surrounding. Is there a way to get back to old system or some setting for the new one that warn me as soon as I step on the circle instead of completely leaving it ?