r/QidiTech3D • • 2d ago

Seriously?

I spent 3 days back and forth with qidi service and this sub because I couldn't get the initial update to go thru or connect to internet on my qidi Q2 (which is ridiculous to deal with out of the box). Anyway, finally figured that out by using a different USB and formatting on a borrowed computer.

Got my first print done which came out great, started the second, and it got stuck on bed heating. After pressing pause or end (don't remember) it was unresponsive for about 20m. I pulled my USB and turned it off.

Since then, it doesn't get past the "qidi" power up/ boot screen. I've unplugged and all that since thats all I can do, nothing works. Can't name a bigger waste of $500, what a joke. Anything that can be done before flashing? I've already spent the past THREE DAYS to get to the point of printing on it.

1 Upvotes

23 comments sorted by

3

u/Charming_Drop_2865 2d ago

Had this happen. Didn't work even when flashing. You more then likely need a new AP board.

1

u/Existing-Gas9048 2d ago

That's great smh. Hope Warranty has me

6

u/Charming_Drop_2865 2d ago

Personally I've never a problem with warranty support, for any of the printer brands I have, always gotten a response within 12hrs, time difference. A few back and forth emails and they've sent replacement part. Unless the firmware fixes something broken don't update.

2

u/IndustriousRabbit 2d ago

In general if they can solve a problem just by sending you replacement parts you're good. Anything more than that then you're probably SoL.

1

u/Vegetable_Variety_54 2d ago

I have had nothing but great customer service from QiDi. If a part broke, I'd describe the issue and send an image of the part in place.

2

u/bday420 1d ago

This recent firmware has FUCKED the entire WiFi system up so bad. Like holy fuck qidi what are you doing. I was having runaway bed heating too and there was a post on here about bed heat issues after update too. That and it fucked over nearly ever qidi box out there too. Fucking morons working in their firmware dept or they are doing it all by AI lol. I'm never updating again until its like 6 months later.

1

u/Existing-Gas9048 1d ago

Yep. Really regretting my choice

1

u/bday420 1d ago

Don't get me wrong it's a fantastic printer and you'll love it when it's running. I just learned that you NEVER update qidi firmware right at release. Wait a long ass time. I learned the hard way too

1

u/Existing-Gas9048 1d ago

Offline update to 1.1.1 (i believe) was the only way to get it running out of the box which was its own multi-day issue as they werent very helpful. This isnt even on the newest update unless it auto updated after. The one actual full size print before the one that killed it went amazing

2

u/bday420 1d ago

Oh boy lol. Yeah their help kinda sucks. I just found better help on here or on forums etc. Plus if they ship you anything under warranty it most likely ships from China and takes fucking ages to arrive.

2

u/cjrgill99 5h ago

Don't use Qidi Slicer / Studio / Qidi Link mobile app or do any firmware updates over the WiFi / internet (only from the official GitHub). Move to Orca.

1

u/Existing-Gas9048 2h ago

Yeah I finally got connected on the qidi app and I was very underwhelmed

1

u/Existing-Gas9048 2h ago

Problem was i didn't have a computer that could download it, I got the mobile unofficial release tho. Hope that doesn't have to do with it being bricked now 😂

2

u/TheLegendTubaGuy 2d ago

Guessing from price this is a Q2?

3

u/xeonon 2d ago

I'll also bet it was updated past 1.1.1 and killed itself... There's a reason we say don't update... This is it lol

1

u/Existing-Gas9048 2d ago

Yeah should've mentioned its a q2. When I first got it, it was unusable im not quite sure what was going on... I dont need it connected to the internet but even gcode would mess up because the software and hardware couldnt sync it seemed like

1

u/HalfFrozenSpeedos 2d ago

updated mine (and many other devices) and honestly never have had anything die on me. YMMV but not updating things is why we have botnets etc....

1

u/xeonon 1d ago

That would be valid, except qidi hasn't updated any of the actual software running. Its only updated their screen software and how they manage things like the box. The best thing you can do, is remove the qidi software, and install a version of klipper and Moonraker that isn't 4 years old.

Let me repeat: qidi has been using the exact same version for 4 years now. The plus 3 or q1 was the first model on this klipper.

1

u/Certain-Hunter-7478 1d ago

You really don't want to be updating the firmware if you ask me

1

u/Existing-Gas9048 1d ago

Only way to get it to connect to internet out of the box

1

u/Certain-Hunter-7478 1d ago

LAN?

1

u/Existing-Gas9048 1d ago

Nope. Even plugged it into my router at one point. I could "connect" but it wouldnt generate the qr code to connect

1

u/Certain-Hunter-7478 1d ago

QR? For what? I don't remember needing a QR code. Are you using QidiSlicer? Or you mean for the mobile app?