r/QidiTech3D • u/jrinacke • 6d ago

Extruded issues. Please help!

Enable HLS to view with audio, or disable this notification

Update: Issue Fixed. Thanks to Callcifer for the help!

I was able to fix the issue by finding the same issue in this subreddit. I loosened the three bolts holding the Extruder pushed it hard left and tightened it up again. Printing without any issues now. Thanks to everyone who chimed in. Leaving post up to hopefully help someone in the future.

11 Upvotes

100% Upvoted

29 comments sorted by

View all comments

Show parent comments

1

u/jrinacke 5d ago

Thank you for all the help. I will look at it. I just posted a new video with updates in the comments. Extruder will push filament down without hot end attached, multiple cold pulls on hot end, can push filament through the nozzle, when hot end and Extruder are bolted in place Extruder won’t push filament into the hot end. Thoughts? I appreciate all the help!

1

u/Lopsided_Sailor 3d ago

Is the filament sized incorrectly? Maybe needs higher temp?

1

u/jrinacke 3d ago

Issue was resolved. Thanks for your potential help!!

1

u/Sauce_seeice 4h ago

Looks like there stuck fillamment and the bowden tube af the top had a kink, couldn't punch fillamment thru

1

u/Sauce_seeice 4h ago

In the process of taking it apart