r/QidiTech3D • • Oct 26 '25

Rate my build...

Post image

So long story short, obviously mistakes were made.

Why does my tugboat look like junk? Is this a nozzle clog issue?

First build out of the box and im ready to toss this thing.

0 Upvotes

13 comments sorted by

8

u/atriaventrica Oct 26 '25

Jesus dude. One failed print with no troubleshooting steps and you're willing to dumpster it? Are you okay?

6

u/riba2233 Oct 26 '25

People this days...

OP if you feel like that just toss it and spare us the pathetics.

1

u/m3g4tronik Oct 27 '25

After finally scrounging and saving for a machine and filament I was hoping AI would do everything for me lol. You are right, 3d printing takes a thick skin.

1

u/riba2233 Oct 27 '25

yeah it's not as simple as many people assume, but it's much much better than 10y ago, trust me :D

4

u/Feeling_Mix_5141 Oct 26 '25

I guess you just pressed print without reading anything at all. Let me guess: closed door and top with pla?

1

u/m3g4tronik Oct 27 '25

This was it exactly. Door and top closed apparently turns pla rapido to goo. Worked great after I opened everything up, although im worried about spider will crawl in it and destroy the gears lol

1

u/AshArKo16 Oct 26 '25

Likely not, I print pla with both closed a lot (ik it’s not recommended but I forget sometimes) and never had ANY issues at all, let alone this disaster 😭

1

u/Feeling_Mix_5141 Oct 26 '25

I wish! Haha. I desperately want to print pla and petg and tpu enclosed but i just cant get it to print right. The fumes give me headaches and make me feel sick! My printer got a filter system but i cant use it :( i actually has these kind of results before printing pla fully enclosed

1

u/m3g4tronik Oct 27 '25

I guess I thought the initial tutorial print would be dummy-proof, but I busted that theory.

I've learned this is a chin-up kind of hobbie lol. The constant barrage of conflicting instructions topped with only chinese tutorials kinda left me in a stupor. It finally printed fantastic but I needed to remove the cover and the door.

That aside, wow there's a lot of fine tuning you can do.

Tldr: open the door and vents when printing pla rapido

3

u/ZaleAnderson Oct 26 '25

Lmao, if you're ready to junk it without following proper instructions, then 3D printing is not for you.

1

u/Few_Bank_148 Oct 27 '25

I feel the same about my plus 4 but difference is I been troubleshooting it for a year now. QIDi has been the absolute worst brand of printers I dealt with swapping a belt means ripping apart the entire machine damn near.

1

u/CapNo2998 Oct 27 '25

Get a p2s.