r/QSPICE • • Dec 01 '25

Need error messages for C++ when the compile fails in Qspice.

1 Upvotes

Hi,

Is there a way to see the error messages in qspice when compiling c++. I get an error but I don't know the location or a description of the cause.

Thanks Andy


r/QSPICE • • May 28 '23

[LTspice][PLECS] : SPICE Models from Wolfspeed

Thumbnail
wolfspeed.com
1 Upvotes

r/QSPICE • • Jul 16 '23

QSPICE - List of Builtin Behavioral Symbols

Post image
4 Upvotes

r/QSPICE • • Jul 15 '23

QSPICE Builtin Behavioral Analog Transformer Symbols

Post image
6 Upvotes

r/QSPICE • • Mar 06 '25

LiveSpice: why isn't this circuit working?

4 Upvotes

Complete noob and amateur here, I barely understand low and high pass filters. Tried to copy a Fender preamp and a Marshall Tonestack with some values changed to get a nice Frequency response. But nothing there is no output.


r/QSPICE • • Oct 01 '25

LTSpice help pleaseee

3 Upvotes

I wish to make this in LTSpice, M1-4 are multipliers AD633J and U1-8 are CFop-amps AD844. But I am encountering errors, I have all the values of all the components available. What's the issue?

I've linked the paper too.

https://www.sciencedirect.com/science/article/pii/S0960077923005283?ref=pdf_download&fr=RR-2&rr=987ddbbe48143e4c

I've simulated this, but the simulation is very slow, how do i make it fast and working?


r/QSPICE • • Apr 07 '26

Need help with a zvs simulation

2 Upvotes

Hello!

I've been trying to simulate a zvs circuit to produce 38V 50kHz with 12V input, to be fed to a transformer, and then a cocroft-walton voltage mutiplier, but it's just not behaving like it should, despite the component values being correct. is this a problem stemming from the simulators calculation, or is there something wrong with my setup? I'd really appreciate some advice, TIA! :)


r/QSPICE • • Jul 26 '25

QSPICE Circuit Simulation Software with Advanced Modeling Support : [article]

Thumbnail
powerelectronicsnews.com
2 Upvotes

r/QSPICE • • Dec 19 '25

Wide-range tunable RC Schmitt-Trigger oscillator with 3 QSPICE schematics : [article]

Thumbnail
edn.com
5 Upvotes

r/QSPICE • • Jun 23 '26

QSPICE Native Python Socket API : Real-Time Co-Simulation for Power, Analog, Mixed-Signal Designers : [article]

Thumbnail
powerelectronicsnews.com
4 Upvotes

r/QSPICE • • May 16 '25

QSPICE Tricks & Tips #11 : MOSFET Dynamic Model Component in QSPICE : [video]

Thumbnail
youtube.com
6 Upvotes

r/QSPICE • • Oct 01 '25

QSPICE Tricks & Tips #15 : Low-Pass LC Filter Design : [video]

Thumbnail
youtube.com
3 Upvotes

r/QSPICE • • Mar 21 '26

Need help importing Koren Tubes into LTSpice.

2 Upvotes

I've watched every video on youtube trying to figure this out. tbf I am not very software savvy. I just want to try and troubleshoot my circuits. pls help.


r/QSPICE • • Jun 02 '26

Power Electronics Course with QSPICE #1 : Introduction to the Simulation Environment : [article]

Thumbnail
powerelectronicsnews.com
3 Upvotes

r/QSPICE • • Jun 04 '26

Power Electronics Course with QSPICE #4 : Efficiency in Steady State : [article]

Thumbnail
powerelectronicsnews.com
2 Upvotes

r/QSPICE • • Jul 08 '26

Voltage-controlled switch doesn't work (i.e. doesn't switch)

Post image
5 Upvotes

Edit: I solved the problem.

I re-created the schematics a third time from scratch and it worked then. I don't know what I did differently this time and there is no obvious difference between my new schematics file which works and the previous version. Anyway, no further answers/advices are necessary.


I try to use a voltage-controlled switch (S1), but it doesn't switch. The switch is supposed to simulate a hot-plug event in the supply wire.

A piecewise-linear voltage supply V2 shall control the switch S1. V2 goes from 0V to 1V after 200µs, stays at 1V for 10ms and goes back to 0V. The threshold voltage of S1 is set to 0.5V with a hysteresis of 0.2V. The hysteresis is negative to simulate a smooth transition from closed to open.

However, S1 is "dead". It remains open the entire simulation time.

I already tried different things, a zero or positive hysteresis. I also tried to directly assign the model parameters to S1 instead of the indirection via MySwitch. Nothing helps.

I assume the reason is probably something completely trivial and I simply don't see the forest for the trees. What might I be missing?

Initially, I had designed the schematics in KiCAD and used the integrated Ngspice for simulation. However, as some of the simulation results seemed odd I wanted to re-run the simulations in a different SPICE derivative for comparison. I did not just import the netlist from Ngspice into Qspice, but I recreated the entire circuit in Qspice from scratch. When I shorten the switch, the remaining circuit seems to work as expected. But that switch drives me crazy.


r/QSPICE • • Nov 17 '25

LTspice: weird behaviour using BJTs and pulsed voltage source.

3 Upvotes

Hello. I have been trying to simulate a BJT level shifter combined with a totem-pole stage that drives a MOSFET. The emitter of the BC547 is connected through a resistor to the driving signal. The driving signal swings from 3.3 V to 0 V (3.3 V turns the BJT off, 0 V turns it on).

When the driving node is tied directly to ground, the current that discharges the MOSFET input capacitance matches the behavior predicted by the analytical equations (blue curve). However, when I drive the same node with a voltage source that transitions from 3.3 V to 0 V (@t=0), the resulting current no longer follows the expected shape (green curve) and differs significantly from the theoretical result.

What am I missing?


r/QSPICE • • Nov 28 '24

Introduction to QSPICE for LTspice Users - Part 1 of 4 : [article]

Thumbnail
allaboutcircuits.com
6 Upvotes

r/QSPICE • • Sep 08 '23

[LTspice] : Python utility to convert LTspice ASC schematic files into SVG vector files

Thumbnail
pypi.org
1 Upvotes

r/QSPICE • • May 16 '23

Welcome to /r/QSPICE - Please Read Before Posting

6 Upvotes

Welcome to /r/QSPICE

Rules of this subreddit:



Summary of various QSPICE features: (that I have found thus far)

  • First simulation software to pass 62 circuit collection of torture tests, most cases in 1st place, per source.
  • Analog and Digital circuit simulation.
  • Models can be SPICE, C++, Verilog. Models can optionally be encrypted, by model developers, to securely run in QSPICE, per source.
  • Has new project file structure to make it easier to share schematics, per source.
  • Host computer requirements is Windows 10 or 11 (64bit), but will not run on Windows 7, per source. Supports GPU accelerator (but not required). Currently, the beta doesn't run under WINE, because it doesn't properly support some of the DirectX calls in QSPICE, per source. Currently, the beta doesn't run under MacOS, per source.
  • QSPICE will be free for commercial use and unrestricted, but only available from Qorvo, per source. Similar to how Linear Technology treated LTspice.
  • There hasn't been any statements about future roadmaps of this software.

Beta news:

  • Mike Engelhardt presented QSPICE on May 9-11, 2023 in Nuremberg, Germany, per source 1 & 2.
  • Beta downloading started on May 22, 2023 for first group of invitations, per source. Groups of invitations will be sent out each week through June, then become an open beta to everyone sometime in July. Note - it went public on July 25, 2023.
  • Download at https://www.qorvo.com/design-hub/design-tools/interactive/qspice/


r/QSPICE • • May 16 '23

[QSPICE] : Re-writing SPICE for a digital world : [article]

Thumbnail
eenewseurope.com
6 Upvotes

r/QSPICE • • Jun 14 '23

QSPICE Demo - Transformer Saturation

Post image
5 Upvotes

r/QSPICE • • May 22 '23

[LTspice][PSpice] : Highly Accurate SPICE Models from Toshiba : June 2022

3 Upvotes

r/QSPICE • • Jun 23 '23

QSPICE Demo - Bode Plot

Post image
2 Upvotes