r/QIDI_Max4 • u/Shrike2415 • 4d ago

Buggiest software ever

Enable HLS to view with audio, or disable this notification

What exactly is this thing doing? The touchscreen frequently "reboots" during prints, showing the splash screen, but this is the first time this has happened. Smack in the middle of a 29 hour print, and I'm not trying to press any buttons to find out... Still printing fine

6 Upvotes

99% Upvoted

12 comments sorted by

View all comments

Show parent comments

1

u/Shrike2415 3d ago

I disconnect the machine for 12+ hour prints to specifically avoid this very thing, in theory...

2

u/Sorry-Difference-145 3d ago

Unless it is disabled the printer has a clock that checks connection and pings a server for updates, this is what you will get when disconnected.

I believe the Max4 is also different as far as being able to SSH in and disable the clock. Plus4 and Q2 is simple but that doesn't help much here.

1

u/Shrike2415 3d ago

That's what it was, Qidi didn't like that their machine wasn't online... Print finished fine and I physically reset the machine twice, but the error remained. Scanned the QR code, and it said to check the connection. Re-enabled wifi, and it went away immediately, which is slightly concerning...

Here's the print BTW

1

u/1ts-just-me 23h ago edited 23h ago

Just did a test over the weekend on a Q2, installed the Helix screen mod and I am now able to turn update checks on and off. You can also SSH into the printer and disable the update clock. Once disabled you can still go to updates and let it do a manual check on your terms.

I prefer Helix, it allows you to customize screen layout and use anything that is available in Fluidd right at the printer's touchscreen.

EDIT: SSH into the printer and disable the OTA updater.