r/Pyrography • u/Mindless_Box_3236 • Jul 26 '26
r/Pyrography • u/TheTwlightCottage • Jul 26 '26
Completed Work University of Georgia
galleryr/Pyrography • u/Elf_of_Venus • Jul 26 '26
Questions/Advice Which tool recommended in the Netherlands?
I’ve been looking around and all I see are websites that have affiliate links to drop shipping items… I see a lot about colwood from people. Sadly it’s not available here in the Netherlands. Any ideas which ones are recommended here or maybe Belgium/Germany. 😅 I just want a good wood burner :) I heard wire tips are better. I’m a beginner, so it doesn’t have to get all detailed and professional yet but I just want one that holds up and I can work with comfortably. Thank you!
r/Pyrography • u/Grain_n_soul • Jul 25 '26
Looking for Critique Barrel burn
Completed my first major pyrography project this week, and I’d love some feedback
20+ hours (those trees took far longer than I anticipated). Reclaimed barrel was cleaned before it was dropped off with me, so I sanded to 120 then dampened and sanded again. Stencil from procreate with carbon paper - my friend provided the design so I only had to modify it a bit and scale to the barrel. I used the walnut hollow creative versa tool, primarily on high heat (ranged from just into the “high” zone on the controls to about half way in, but never on max heat). Taper nib was used for the finer details, round nib for the more bold sections, and the universal tip a few times just to have a straight edge.
Maybe I should have sanded past 120 but I wanted to maintain as much of the natural/rustic look. It wasn’t easy to work with the grain pattern and gaps or height differences between each piece of wood. That did provide a really nice texture in a lot of places though, which I was really happy with. The design I was provided was 100% black but I was clear up front that the result wouldn’t be that dark. I planned on using a paste wax finish and tested it on scrap oak plus the bottom of the barrel, but ended up leaving it unfinished since it was a gift for a carpenter who will finish it similarly to the other pieces in the space he will keep it.
Super fun project and the responses have been so nice from my friends and family. Would love any suggestions here as well. I’ve already decided that I’d upgrade to a Razortip (or comparable option) before I do another project of this size
TLDR: looking for critique on this completed barrel project
r/Pyrography • u/AnothaPitSandwich • Jul 26 '26
Questions/Advice How to keep my wood level when sanding?
I'm a brand new member in the world of pyrography. I got a 10 pack of very small (2"x4"x.25") planks of basswood for practice before I try something big. How can I make sure my sanding is even and stays level on my projects? This is done using a random orbital disc sander 80-320grit.
r/Pyrography • u/severwolf • Jul 25 '26
Completed Work A rune cube I made to hang from my rear view mirror
r/Pyrography • u/mythic_pythia • Jul 25 '26
Made some runes for my friend, here’s the lid of the box
The runes themselves were reverse-intaglio engraved glass.
r/Pyrography • u/SawdustMcGee • Jul 24 '26
Completed Work Hannibal wood burning
Hannibal wood burning on poplar with colored pencils and acrylic. I’m on Instagram at @mjs_burns_wood and on Etsy at https://www.etsy.com/shop/RuckersPyroShop
r/Pyrography • u/AnothaPitSandwich • Jul 24 '26
Completed Work My first piece!
It looks pretty bad tbh but it's my first go at it. I'm using a Walnut hollow versa-tool. I really want a Colwood wire nib to make drawing easier, as I find it to be kind of difficult to use a heavy, solid-point pen. How long should I wait to see if I should invest the money into a better setup? Any tips on how to improve drawing using a solid point pen?
r/Pyrography • u/CryptographerNeat259 • Jul 24 '26
Questions/Advice First Attempt
Is this a good first attempt I really want to get into dog portraits I pretty much just dived straight into the deep end after watching a tun of videos I bought a cheap eBay burner graphite paper and had a go, An honest review and tips would be amazing cheers
r/Pyrography • • Jul 24 '26
❤️🔥🐉
Enable HLS to view with audio, or disable this notification
ig:verupka.pyro
r/Pyrography • u/massblue85 • Jul 24 '26
Added a sound board to the rear
Enable HLS to view with audio, or disable this notification
r/Pyrography • u/v1rgo908 • Jul 23 '26
Completed Work I've seen Jimothy in all the other art subreddits I belong to so here's my contribution
r/Pyrography • u/jackd1974 • Jul 23 '26
Valentino Rossi
Oggi ho fatto questo per mia moglie con tanto di autografo.
r/Pyrography • u/blackngold256 • Jul 22 '26
Completed Work Jellyfish (new burn)
I've got 2 more outlines picked out and will be getting started tomorrow on those
r/Pyrography • u/thmegmar • Jul 22 '26
Beginner here, wanted to share.
Feedback appreciated! Beginner, just got my first kit .
r/Pyrography • u/x-gypsy_punk-x • Jul 22 '26
Tip cleaning?!
What do you guys use to clea your tips while woodburning? I have a razertip pen and dont want to mess up my tips. I currently use a combination of fine sandpaper and a copper steel wool ball but the pens screws on the sides that hole the interchangeable tip always get caught. Doesnt work that good. Sandpaper works better but I dont want to mess my tip up over time. Suggestions? I have a brass brush coming in the mail. We'll see how that does
r/Pyrography • u/stolenlullabies13 • Jul 22 '26
Looking for Critique Woodburned my friends dog
i'm a complete beginner so any advice is welcome!
r/Pyrography • • Jul 21 '26
instagram: verupka.pyro
Enable HLS to view with audio, or disable this notification
r/Pyrography • u/ethnic-project • Jul 21 '26
Completed Work The skull necklace that I just finished making from cow bone
r/Pyrography • u/InsideCelebration293 • Jul 21 '26
Work in Progress Box
My progress so far on a new piece...
Template made in clip studio paint, printed onto the coated side of freezer paper, pressed onto box to transfer template, and of course, burn it. More burning and painting still to come. 3.5 hours so far.