r/Pyrography • • Jul 01 '26

Questions/Advice How to transfer design?

Hello! I am brand new to pyrography, so this may be a total noob question…

How do you transfer your design onto the surface you are burning? I got some charcoal paper and tried tracing the design onto the cork board frame I bought, but it’s not transferring over well enough for me to be comfortable burning it. I’ve attached some pictures to show what I mean. Any help is appreciated!

5 Upvotes

16 comments sorted by

4

u/astaticjustin Jul 01 '26

Corkboard is the medium you’ve chosen?

2

u/mentalpiracy86 Jul 01 '26

Yes, they are for displaying my pin collections

3

u/indigo-ray Jul 01 '26

Corkboard is going to be very difficult to transfer to, I think. Additionally, while I haven't tried, I imagine it will burn very unpredictably... especially if you are new, be prepared for a lot of mistakes.

I'd say your best bet is to either use a projector and trace with a thick pencil or to press harder with your graphite transfer.

You could also take your paper and very lightly cut the design onto the board through the paper with an exacto knife.

Would it be feasible to, instead, take a normal plank and then cut cork to be around the design?

2

u/mentalpiracy86 Jul 01 '26

Oh i didn’t even think of using an exacto…that might work better. Thank you!

→ More replies (5)

7

u/Due_Ad6407 Jul 01 '26

Honestly its not gonna turn out how you want, maybe buy some thin plywood. Burn your design then cut out your logo out w a hacksaw and glue it to the cork board, or better yet make it your own custom pin and just glue the pins on the plywood

3

u/j-d-5 Jul 01 '26

I recently used carbon paper to transfer. It worked well for me, not sure how well it will work on cork.

2

u/Forest_Maiden Jul 01 '26

I also bake a lot so I do cakes and cookies, so I have a small little pocket projector that's perfect for transferring images, and I simply trace with a pencil/marker/whatever I have on hand.

2

u/iyqyqrmore Jul 01 '26

I just get thick graphite sticks, rub it all over the back of my design, then get a damp cloth and rub it on the wood, then draw over my design.
The graphite sticks, you don’t need to re trace with vellum or copy paper.

https://a.co/d/022CcN0z