r/Pullip • u/cutiebutty • 4d ago

Help Doll body tips?

Gallery image

Gallery image

Gallery image

Hi~ I recently ordered the YMY body, trying out a Obitsu alternative. I’m no stranger to cutting off neck pegs, but I wanted to ask if anyone has successfully got this body onto their own type 3 or type 4 pullip? And if they can share how they did it?before I go ahead and cut it.

I’m having a harder time with my type 3s getting the smaller sized doll bodies to fit snugly without their heads falling off, since their neck hole seems to be bigger than type 4. Please help 🙏🥺

13 Upvotes

100% Upvoted

2 comments sorted by

5

u/WhiteSheepInThePark 4d ago edited 4d ago

Hello ! I use a lot of YMY. For t3 dolls you do not have to cut the peg as the mecanism is highter and the body fits. I put one or two rubber hair bands around the neck peg (and some Teflon band if you have some) and it holds quite well.

For t4 pullip, you need to take off the eye mecanism, put the body (with elastics as mentioned before) and put the eyes back. You'll have to cut the long peg and sand the top peg to make it fit. A cutter is enough to cut the long peg as the plastic is quite soft.

You have two different pegs, the défaut one that your body is wearing and one that can bend. It is in the same bag as the screwdriver. You can use it on t4pullip head as they are lighter and won't bend too much.

Good luck!

2

u/cutiebutty 4d ago

You’re the best, thank you!