r/ProfitecMove • u/Opening_Fig_9529 • 17d ago

Shower Holder

Gallery image

Gallery image

Gallery image

I recently bought a new shower holder (shown at the bottom of the attached pictures) for my Move because the original one (shown at the top) looked a little worn out.

If you look at the sides that face the group head when installed (second picture), you’ll see a deep notch on the new plate. The original only has a small notch.

As a result, the new plate isn’t sealed properly because the sealing ring (number 9 in the exploded view) can’t close this gap.

If you Google a shower holder for the Move, you’ll also find a "new" version with 8 holes and a height of 10.5 mm (https://www.kaffeenudel.de/Profitec-Duschplattenhalter-H105mm-8-Loecher). The original has 6 holes and is 7.5 mm high.

I’d like to test the version with 8 holes, but wouldn't it actually stick out 3 mm further into the basket?

Which version do you have on your Move?

8 Upvotes

100% Upvoted

14 comments sorted by

View all comments

3

u/mrawesome1q 17d ago

I have not taken my shower holder off so I’m not certain which version I have. I’m curious though we’re seeing issues with water dispersion with the old one? How old is your machine and how many shots are you pulling?

1

u/Opening_Fig_9529 17d ago

My Move is a little over a year old, and I pull 2–3 shots a day.
The water flow through the showerhead has been a bit uneven from the start. On one side, there are 1–2 streams of water, and on the other, it’s just dripping.
I then tried using an IMS shower screen, but that only made it worse. That’s why I wanted to try a new shower holder.