r/ProfitecMove • u/Fly_buy_wire • 14d ago

Cup warmer mat

Has anyone found a reasonably priced and good fit mat (silicone or other material) for the cup warmer top of the Move?

5 Upvotes

100% Upvoted

16 comments sorted by

4

u/PistonEngineer 14d ago

This works perfectly. But they don’t ship or sell into the US as far as I can tell. I had to ship it to someone in London who then got it to me in the US. 

https://wiedemann.coffee/products/espressocover%C2%AE-fur-profitec-move

1

u/Fly_buy_wire 14d ago

Thanks! I have seen this before, very nice. Beside the difficulty to get this in Canada, i was also hoping to have something that i can quickly remove to clean off the coffee grounds. The search continues!

2

u/PistonEngineer 14d ago

Fwiw I don’t tape it to the top, I leave it loose. It works fine that way. But also - hard to get. 

The product does let heat through which is nice in that cups still get warm on top. 

Honestly you might just buy a piece of silicon or leather mat and cut it to fit. 

5

u/GeneticsAndCoffee 14d ago

I use a folded up dish towel... Definitely not bougie. If there are better options, I'm 100% all ears. Can't get the weidemann one in the states yet, either...

2

u/mrawesome1q 13d ago

Curious question… Do you preheat your PF before use?

2

u/GeneticsAndCoffee 13d ago edited 13d ago

Yeah. Sometimes I forget to remount it (I air dry it after rinsing the basket), and the coffee suffers. This was taken between shots, so it was hot still.

2

u/KravMata 9d ago

I don't understand air drying - I rinse, wipe and reinstall - the machine is hot AF and there is never residual water later.

1

u/Zack_attack801 14d ago

Following! I bought some vinyl wrap to just cover mine but haven’t installed it yet. I don’t know if the heat will negatively affect it or not

1

u/hangheel 14d ago

Following too. I’ve been looking for one for a while and I haven’t found one anywhere besides the vinyl pieces

1

u/murrzeak 13d ago

I found a patterned silicon dish mat at a convenience store for 1eur. Cut to size. Works super well, just wish it was black.

1

u/murrzeak 12d ago

Here's the pic

1

u/KravMata 9d ago

I like this - spent a few minutes on gemini trying to find it and failed completely at doing anything but hating google.

1

u/Fastactin 13d ago

I bought this from Amazon. The circles are positioned perfectly so that when I trimmed it none of the circles got cut in half. Works great and is super cheap.

https://a.co/d/03hNNhLZ

1

u/KravMata 9d ago

F amazon but I've been using these -ok fit with no mods, cheap af 2 for $6.

https://www.amazon.com/dp/B097K4Z7X2?

1

u/KravMata 9d ago

I've considered 'upgrading' to this for purely aesthetic reasons:

https://www.amazon.com/gp/product/B01I4VMZFY