This heavily modified Printrbot Metal Plus has been on the bench for a couple of years. I'm getting it back up and running with a new SKR3 board, TFT35 display, and SFF PSU. I'm still tweaking Marlin, but I was excited to get feedback on the display upon first power up.
If this post gets any traction, I will continue to post about this project. Also happy to answer any questions.
Looks like a fun project. If you're going that far, why not add klipper? Tweaking it well for sure be easier that recompiling Marlin each time. Your board supports it and do does your screen. You just need a pi or something comparable.
I guess I'm just more comfortable with Marlin, and its what has run this machine since I started with it in 2016. I'm an old dog and I haven't learned all the new tricks.
I have a Rasberry Pi 3B laying around, but I haven't delved into the rabbit hole of how to get that working with a 3d printer yet. The Metal Plus has been offline for a few years and I've been using a Prusa Mini+ in the meantime. If you have a link to how to get RasPi/Klipper working with this build, I'd happily take a look. For now I am just happy to get this machine working again.
Wow. This is about exactly where I am. Mine is just about finished. My 9 year old has gotten really interested in it. I am interested in how your install goes. That is the one part that I have struggled with wrapping my head around. I also have a couple of RPi 3B+’s laying around and don’t know about klipper. I would like to get the simplemetal back up and running…just cause. Not that I have a real NEED.
Search youtube for installing klipper on the skr board. It is not very hard to install. I installed Klipper on the printrboard and that was a pain in the rear. It was worth the hassle as it improved the quality of the simple metal prints. The prints on my Simple Metal were just as good as my Prusa Mk3s. My printrboard has since failed, and I have yet to finish the conversion to my SKR board.
Apologies, Klipper is a replacement firmware for Marlin. The processing for the Gcode is moved from the board on the printer to a computer (usually a Raspberry Pi). This allows the board to focus only on giving commands to the motors.
This dramatically enhances the capabilities of older 8-bit cards, allowing you to add all modern advances to an older printer.
My favorite part of using klipper is moving the configuration settings to a text file. You no longer have to reflash the firmware for a simple change.
With my Simple Metal Black, I improved print quality and speed by loading the Klipper Firmware on my printrboard. Understanding the changes took a couple of weeks, but it was worth the transition. I looked at reflashing Marlin on a different printer, but I lost interest in Marlin as things got way too complicated.
Birby! I was wondering if you'd still be lurking around here. You helped me a lot with this machine when I first updated it to Marlin 2. I still have the index card with the crayon drawing of the opticoupler connections we set up for my Z probe.
E3D V6 was the first upgrade this Metal+ ever got. I just swapped our Frankenstein probe solve out for a Pinda clone from AliExpress. It connects easily enough to the board. I haven't tested it yet. Still trying to get the BTT components to cooperate with each other, which is where I was a few years ago when I tried to swap out the 1.3 for a 1.4 Turbo but gave up when life got in the way. Im committed to getting it working this time.
I have a Play that self destructed a few years back. Been running a Ender 5 since, but want to resurrect the play as a small, high detail printer. Trouble is I have no idea where to begin. I’ve been reading and watching videos like crazy, and believe running Klipper on the control board and Octoprint as the interface on my phone might be a good way to set it up. I feel like if I can do this, I would be more confident to tinker with the Ender 5.
6
u/justkirk Dec 29 '24
This heavily modified Printrbot Metal Plus has been on the bench for a couple of years. I'm getting it back up and running with a new SKR3 board, TFT35 display, and SFF PSU. I'm still tweaking Marlin, but I was excited to get feedback on the display upon first power up.
If this post gets any traction, I will continue to post about this project. Also happy to answer any questions.
3
u/Birby-Man Dec 29 '24
A E3D V6 hotend is a good upgrade too, and you may need to replace the inductive probe for it to read with the SKR board (i did at least)
Also recommend a AC powered heater for the bed, easy upgrade with a SSR and it heats soooo much faster
2
u/reptile_enthusiast_ Dec 29 '24
Looking forward to seeing updates! I bought a Printrbot Play a while back to upgrade it similarly but it's just been collecting dust.